Recent content by zer0bitz

In my case I have set DNS in LAN settings to 192.168.1.5 where my pi-hole is installed. I also have manually assigned 192.168.1.5 in the "Manually Assigned IP around the DHCP list". In DNS Director I have set DNS Director enabled and Global Redirection to User Defined 1 and in the User defined...

I have a unmanaged TP-Link Switch connected to LAN4 port and never had any issues with it with my RT-BE86U.

Yup! Im glad I got it setup the way I had my previous router. Everything is up and running and no need to make changes. Thank you for your help!

So today I tried your recommended method, and it looks like the router is working fine now. Saving stuff doesn’t trigger a reboot anymore. But if my USB-to-SATA SSD enclosure is plugged in when it reboots, it goes into a boot loop. I’m pretty sure the SSD is the culprit. If I unplug it and let...

Thanks, I will try this method. I will post here how it went.

Not yet. I might do it next week. Should I factory reset from Web GUI before re-flashing?

I replaced my RT-AX56U with an RT-BE86U because I got it for half the price. The previous owner had it replaced due to an issue where the LAN1 port was stuck at 100mb/s. I'm not sure if it was his Ethernet cables or something else, but the unit I bought is a replacement, and the LAN1 port is...

Yesterday I managed to install ntpMerlin with Chrony using NTS servers without any problems at all.

The screenshot you provided shows a syntax error ("unterminated quoted string") in the /diversion.conf file at line 44, which is likely causing Diversion to stop working after a few days. This error suggests the configuration file is corrupted, possibly due to an incomplete write. Use SSH to...

Updated and everything working fine.

Never seen that. Looking at the domain it looks like a phishing site etc. Do you have any suspicious looking plugin installed in your browser? I would highly recommend clearing browser cache too.

The best way is to add them manually. While the easiest method is to save the config file from the RT-AX86U and upload it to the RT-BE86U, but I think it would cause problems and really not recommend doing it.

Some device is being disconnected from the wireless network.

21 hours up and running. Everything is stable and working as intended. Thank you @RMerlin

Things you would need to get your ad-blocking to work. These links are not recommendations, but are provided only for reference on what to buy. Asuswrt-Merlin supported router. You can see all of the supported router models on the front page. Last update seems to be 21.7.2024. SSD or M.2 SSD...