Menu
What's new
By:
Filters Better Search

Skynet Dual-WAN support?

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

V

vertigo888

Occasional Visitor
Hi - Does Skynet support Dual-WAN? I have a Dual WAN setup. If it doesn't, are there plans to support it and with firewall enabled within the Merlin firmware, will the WAN thats's not covered by Skynet be protected?
 
It does not support Dual WAN. Is it a failover or load-balanced configuration?
 
It's in a load balanced configuration but I have specific clients going down each WAN via rules.

Just to double check here - I have the firmware firewall enabled anyway. This will cover both WAN even with skynet enabled for only 1 of them?
 
vertigo888 said:
It's in a load balanced configuration but I have specific clients going down each WAN via rules.

Just to double check here - I have the firmware firewall enabled anyway. This will cover both WAN even with skynet enabled for only 1 of them?
Click to expand...
I have Dual WAN setup due to WAN port failure, with primary WAN set to a LAN port. Router shows secondary as cable unplugged.
Skynet works for me.
 
Is this still true?

I have Dual Wan in Load Balance and Skynet logs only seems to be aware of ppp0 (Primary WAN)
 
JuanGF said:
Is this still true?

I have Dual Wan in Load Balance and Skynet logs only seems to be aware of ppp0 (Primary WAN)
Click to expand...
Yes, Skynet only checks wan0_ifname. Just curious what interface(s) are being passed to firewall-start in your system log in LB mode?
Code: 
grep "firewall-start" /jffs/syslog.log-1 /jffs/syslog.log
 
I don't get anything with that command.

1715287543196.png
 
It seems my logs are in /tmp/ and not in /jffs/ . This is the output:

Code: 
/tmp/syslog.log:May  8 02:49:56 custom_script: Running /jffs/scripts/firewall-start (args: ppp0)
 
You must log in or register to reply here.

Similar threads

Maverickcdn
Detect Dual WAN in use
Replies
4
Views
354
Ranger802004
R
jetpack42
  • Locked
Best practices when using add-ons?
2
Replies
21
Views
1K
thiggins
thiggins
W
X88u Merlin dual wan over ethernet causes soft brick
Replies
4
Views
542
Ilya_
I
D
Asus GT-AX11000 - Dual WAN Issues - Does Merlin Resolve?
Replies
17
Views
1K
Ranger802004
R
B
Dual WAN and mesh Wifi - what's the best way to increase internet bandwidth and wifi coverage?
2
Replies
25
Views
1K
Tech9
Tech9
Similar threads
Thread starter Title Forum Replies Date
Maverickcdn Detect Dual WAN in use Asuswrt-Merlin AddOns 4
Viktor Jaep VPNMON VPNMON-R3 v1.3.5 -May 11, 2024- Monitor WAN/Dual-WAN/VPN Health & Reset Multiple OpenVPN Connections (Now available in AMTM!) Asuswrt-Merlin AddOns 217
P NVRAM Dual-WAN nvram: wans_routing_rulelist Asuswrt-Merlin AddOns 4
B amtm WAN service schedule off/on script ? Asuswrt-Merlin AddOns 1
S Unbound DHCP DNS same as WAN DNS based on merlin-dns-monitor.sh Asuswrt-Merlin AddOns 0
B Unbound unbound/WAN settings Asuswrt-Merlin AddOns 31
J DDNS does not update dyndns.org when WAN IP changes Asuswrt-Merlin AddOns 11
R Configuring Chk-WAN Asuswrt-Merlin AddOns 2
rwheaton1 spdMerlin WAN speed is correct...VPN is very low!! Asuswrt-Merlin AddOns 20
M wan-failover (2.0.5) showing 100% packet loss, but not failing over Asuswrt-Merlin AddOns 0

Similar threads

Latest threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!

Members online

Total: 549 (members: 24, guests: 525)
Top