Menu
What's new
By:
Filters
Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. N

    Skynet Skynet 7.5.8 Firewall UI Issues

    Hi I have the same problem and I use DNS – Cleanbrowsing – Family • 185.228.168.168 • 185.228.169.168 Also tried • 1.1.1.1 • 8.8.8.8 But the same outcome. Has a solution been found for that? I had Skynet GUI working fine for me in the past on this router and all GUI. Also all...
  2. N

    Release Asuswrt-Merlin 386.1 is now available

    I did a dirty flash last night and whiles the router worked fine for 45min or so after leaving it overnight in the morning the router was doing constant reboots with approximately 30 seconds in between reboots. I had to revert back to 384.19 and everything is back to normal.
  3. N

    FlexQoS FlexQoS 1.2.4 - Flexible QoS Enhancement Script for Adaptive QoS

    Thanks Dave that's a bit odd, I don't use AiMesh nor have I ever set it up since I only have a single router. Is there any way I can disable/kill this process since it is keep restarting the Firewall? Update: After changing the Queue Discipline from fq_codel to sfq the frequent firewall restart...
  4. N

    FlexQoS FlexQoS 1.2.4 - Flexible QoS Enhancement Script for Adaptive QoS

    @dave14305 just as an update a rooter reboot fixed the issue :confused:. I've been playing the streamer for hours today and no issues so far. The only thing that started to happen after the reboot I get frequent firewall restarts and the below is what I get in the syslog. Any idea what may be...
  5. N

    FlexQoS FlexQoS 1.2.4 - Flexible QoS Enhancement Script for Adaptive QoS

    Many thanks Dave for the idea above however in my case the issue almost happens few minutes after every time I start playing the streamer and the play is uninterrupted. Following your idea above initially I had a theory that if the bandwidth is close 100% utilisation the traffic to the streamer...
  6. N

    FlexQoS FlexQoS 1.2.4 - Flexible QoS Enhancement Script for Adaptive QoS

    Yes I do but it only runs at night so unlikely to cause the problem that occurs during the day ;). By the way I managed to catch the time of when the problem occurred and looking at the crash.log I can see the below. Could that be of any relevance? Dec 31 19:16:12 RT-AC86U-4AB0 kernel...
  7. N

    FlexQoS FlexQoS 1.2.4 - Flexible QoS Enhancement Script for Adaptive QoS

    Nothing that I can find alarming in the syslog, however quite a few events in the crash.log and firewal.log but I can't determine if they can cause the issues. Happy to PM you the logs if you are interested.
  8. N

    FlexQoS FlexQoS 1.2.4 - Flexible QoS Enhancement Script for Adaptive QoS

    Indeed, apologies for the bad timing :). When the problem occurs, the Classification page reports the traffic in the same Class "Web File Transfer" in the charts and in the filtered connections sections. However when the problem occurs (it is not necessary triggered with queuing last few...
  9. N

    FlexQoS FlexQoS 1.2.4 - Flexible QoS Enhancement Script for Adaptive QoS

    tc -s filter show dev br0 | grep -B1 0x800a filter parent 1: protocol all pref 5 u32 fh 827::803 order 2051 key ht 827 bkt 0 flowid 1:11 (rule hit 10589469 success 1243059) mark 0x800affff 0xc03fffff (success 1243059) -- filter parent 1: protocol all pref 13 u32 fh 806::800 order 2048 key ht...
  10. N

    FlexQoS FlexQoS 1.2.4 - Flexible QoS Enhancement Script for Adaptive QoS

    Please see below: T-AC86U-4AB0:/tmp/home/root# iptables -t mangle -nvL FlexQoS Chain FlexQoS (1 references) pkts bytes target prot opt in out source destination 0 0 MARK udp -- *...
  11. N

    FlexQoS FlexQoS 1.2.4 - Flexible QoS Enhancement Script for Adaptive QoS

    Happy to do that but I'm certain that the audio stream comes from IP: 69.64.52.71 Port: 10999. The streamer communicates with all sort of other IP for whatever reason hence I only made the rules applicable for 3 Marks that cover all Audio streams but exclude all other stuff.
  12. N

    FlexQoS FlexQoS 1.2.4 - Flexible QoS Enhancement Script for Adaptive QoS

    I managed to reproduce it and it appears that the traffic class changes from "Others" to "File transfer" in the charts but it is still tracked as "Others" in the connections when I filter based on remote IP.
  13. N

    FlexQoS FlexQoS 1.2.4 - Flexible QoS Enhancement Script for Adaptive QoS

    Thanks for the prompt replay, as always, Dave. The traffic is controlled by 3 iptables rules based on the fixed IP address of the streamer (see below). With regards to your other question I'm trying to replicated the problem but I can't brake it now :rolleyes:. As soon as I manage to reproduce...
  14. N

    FlexQoS FlexQoS 1.2.4 - Flexible QoS Enhancement Script for Adaptive QoS

    Hi @dave14305, I observed a unusual behaviour of the FlexQoS now that all the kids are at home watching Netflix and playing Games and the bandwidth gets utilised almost 100% all the time. I have FLAC internet radio HiFi category classified as "Others" with the highest priority and sometimes...
  15. N

    FlexQoS FlexQoS 1.2.4 - Flexible QoS Enhancement Script for Adaptive QoS

    If you use a single device for Gaming you can do what @QuikSilver suggested above. I'm not a gamer but an idea could be if you use multiple devices you can monitor a particular device that uses the Google Stadia and see what Mark the Trend Micro engine assigns to the Google Stadia traffic and...
  16. N

    scMerlin scMerlin v2 - Service and script control menu for AsusWRT-Merlin

    Do you have access to amtm via the CLI? If not try this: https://www.snbforums.com/threads/amtm-step-by-step-install-guide-l-ld.56237/
  17. N

    RT-AC86U both CPU on 100%

    Thanks for the update @wizin. Whilst I haven't find a solution the below experiment may give some clues to the more knowledgeable members of this forum to help us determine what the problem might be. I'm fairly certain it is USB settings related. Below are steps I took: Formatter the JFFS...
  18. N

    spdMerlin spdMerlin - v4.x - speedtest and bandwidth monitoring

    An idea may be to go to the syslog and look for events at the time/s your scheduled speed-test/s did not occur. This may give you some clues perhaps.
  19. N

    spdMerlin spdMerlin - v4.x - speedtest and bandwidth monitoring

    The way the threshold works is say your current setting of the QoS DL bandwidth is 100 Mbps in the QoS page and your threshold is set to 10% any new calculated speed (i.e. 95% of the average of the last 10 scheduled speed-tests by spdMerlin) that will be between 90 and 110 Mbps (+/-10%) will...
  20. N

    spdMerlin spdMerlin - v4.x - speedtest and bandwidth monitoring

    Yes the AutoBW works with FlexQoS. Your current QoS settings are fine just leave them as they are and spdMerlin will update the UL/DL Bandwith in NVRAM as required based on your AutoBW settings. Regarding the AutoBW you can set it up to scale factor of 95% (e.g. if the average value of your...
Top