Advanced search results
Better search
Select: Thread titles
Keywords: aimesh
Posted by:
Search forums: Selected
Results count: 260
Select: Thread titles
Keywords: aimesh
Posted by:
Search forums: Selected
Results count: 260
-
- 6 Posts - OzarkEdgeMy AiMesh has a MOCA2.5 wired backhaul consisting of a coax segment with an Ethernet segment on each end: AiMesh router <2.5GbE> <MOCA2.5> <2.5GbE> AiMesh node Router is on UPS1. Router end MOCA adapter is on UPS2. Node end MOCA adapter is on UPS3. Given this multi-segment wired backhaul... -
P- 2 Posts - pietronHello, I have Asus RT-AX88U Pro and I set up port forwarding to PC/linux machine (wired connection directly to RT-AX88U Pro, added a rule in DHCP that this computer has to have the same IP every time 192.168.50.236; Port forwarding details: external port: 1980, internal port: 1980; service...
-
N- 22 Posts - neil0311Can someone provide a link to an article or post (I’ve looked) or give an explanation of the technical difference between these settings? I have 3 routers connected in a mesh with Ethernet Backhaul Mode set. Having some possible issues and thought about setting up as AIMesh in AP mode but...
-
U- 5 Posts - um hombreCan somebody please explain this to me. When I upgrade my Ax11000 pro to the latest 3.0.0.4.388_24721 firmware, all of a sudden my gt6 aimesh can only connect at 300-400 mbps speeds (dl/ul, measured speeds). If I rollback firmware to previous one, I get 1400-1500 mbps measured speeds. I...
-
D- 10 Posts - donyewestI swear I'm not brand new, long-time reader but first time poster, I just retired my N66U running Merlin's build because my neighbors have 160MHz spectrum hogging monsters on across 2.4g, 36 AND 149 5g which measure -62dBm in the center of my home. We have basic country cable internet fully...
-
D- 30 Posts - djjsinSo, I have an AImesh setup with an RT-AX88U Pro as my primary node and then connected via the 2.5Gb backhaul is a RT-AX86U aimesh node to cover my house. Recently we converted my garage into an ADU for my mother in law to live. She was noticing wifi drops and issues, so I added a XT8 as a...
-
D- 5 Posts - dlukanidinAiMesh page shows abstract device icons in Web UI because it try to load files with URL as https://nw-dlcdnet.asus.com/plugin/productIcons/RT-AX88U-PL.png and can not find it. If I load file https://nw-dlcdnet.asus.com/plugin/productIcons/RT-AX88U.png it's OK Why Web UI load files with -PL...
-
P- 10 Posts - pierzogadMy setup is: TUF GAMING AX6000 as primary router and RT-AXE7800 as node (connected by 2.5G ethernet) - both updated to latest firmware version. TUF GAMING AX6000 supports only 2.4 and 5 GHz and RT-AXE7800 has 2.4, 5 and 6 GHz. I've created SSID "Home-Wifi" with WPA2-Personal authentication -...
-
A- 3 Posts - AustinMintonI have an Aimesh setup with 4x GT AC 5300 working well (main router same too). I am looking to install a GT-AXE11000 as aimesh node (not main). Would I be able to use the extra band for 6e devices or will it be useless? Currently I am using seperate ssid for each band and all nodes on ethernet...
-
D- 13 Posts - dyph28Hello guys, I have been silently reading this forum but now has come the time to post. I am moving to a new home. I have a AX86u and an old AC86u. I have been thinking about setting up ethernet backhaul Aimesh, yet I have seen that with this set-up both routers use same channels for wi-fi...
-
B- 2 Posts - BoostOverThis is my configurazione: DSL AC68U as node. DSL AX82U as master Firmwares updated. If i force connection with master all ok. If i force connection with node don’t work. Any advise? Thanks. (Sorry for my bad English)
-
S- 17 Posts - sivaprasathI have AiMesh configuration with AX88U (Main Router) -> AX58U (Node - Connected via Ethernet Backhaul). Both Router/Node is updated to latest Firmware version 3.0.0.4.388_23748 and all "Settings" are default to Factory recomended. Only, when 160Mhz client is connected to AX88U(Main), I am...
-
K- 8 Posts - KidJoeSo currently I have an AiMesh setup. The Asus ROG GT-AX6000 is the main (Firmware Version 3.0.0.4.388_23012), and I have two wired notes which are RT-AX88U (Firmware Version 3.0.0.4.388_22525) , and TUF-AX5400 (Firmware Version 3.0.0.4.388_22525). Its been stable, gives great coverage, and...
-
D- 41 Posts - darkgiantsI have three RT-AC68U's that serve my internet needs perfectly fine for the last few years, and I believe they should continue to do my internet needs fine for the foreseeable future. However, I am exploring two options for these three routers: Option # 1: One RT-AC68U setup as the primary...
-
- 6 Posts - ZoltSo I finally found my issue I've been facing for a little while now. I have 2 RT-AC66U B1 routers set in AIMesh mode. I was having all kind of disconnect, and it seems it was due to my main unit - it's also the oldest of the two. I've been pushing this for too long now, but today, I decided to...
-
G- 8 Posts - Gravityzi noticed that my wifi is extremely slow wifi devices are very hard to reach as if something is jamming the wifi after a reboot things are ok again. in the past i have had this issue but did not have it for a very long time anybody else have had this happened main router is a RT-AX88U and mesh...
-
A- 5 Posts - Andrew SmithI currently have 2 (RT-AX92U ) running aimesh. I recently acquired 2 ZenWiFi ET8 and was wondering if adding them to my current network would cause any issues? I have read they can have compatibly issues but wondering if anyone has tried this or had any input.
-
- 4 Posts - MacysumoHad my ZenWiFi Pro ET12 (single not dual) Router for several weeks and it started having problems with AIMesh. It would see the mesh routers in the browser app but indicate that they're offline. Two mesh nodes were connected by ethernet backhaul and a third by 5 GHz wireless (two RT-AC3100 and... -
G- 5 Posts - GravityzMy setup RT-AX88U main router RT-AC86U AImesh node i have been using smartconnect for a while now, mainly because it forces a client not only to switch to 2.4Ghz but also back to 5Ghz when that signal is stronger. i lately disabled smarconnect to see how aimesh is doing on it's own. it looks...
-
J- 10 Posts - JarpI tried to use search but did not find messages about this problem... So I am going mad with AiMesh. It's been working poorly for years so I finally got to improve my network. I got separate wired router for routing, DHCP etc. because I want to make sure my wired clients won't drop out when Asus...
-
- 14 Posts - XIIICurrently I have an ASUS GT-AX6000 router. This replaced my AC86U router. Initially, I was considering to use that AC86U router as an AiMesh node, but I noticed that the AC86U does not get the future Pro features from the current beta firmware (I'm particularly interested in the new VLAN... -
D- 11 Posts - djjsinSo, my setup includes 2 RT-AX86U devices setup using the 2.5g ethernet port as the ethernet backhaul. I Also have a XT8 setup as a wireless aimesh node, using 5Ghz-2 as the wireless backhaul. What i've noticed is that when I setup the XT8, i lose the ability to set the aimesh channel to...
-
- 2 Posts - alexYQRI have two ET12's and a GT-AXE16000. If I add the AXE16000 as an AiMesh node to the ET12, does the AXE16000 retain the use of all 4 wireless bands? Thanks for the help.
-
- 3 Posts - ZardozI have a network consisting of a pair of RT-AC86U units. One is an AiMesh Router and the other is an AiMesh Node, connected by a 5GHz backhaul. They were both running on 3.0.0.4.386_46092. On Friday, the RT-AC86U AiMesh Node failed with the known issue of the step-down chip dying. I therefore... -
G- 3 Posts - GravityzHello, i have a very nice script running on my router which detect all the devices which are connected to the RT-AX88U router. i use this for geofencing purposes problem is that if a device switches from the router to another aimesh node it is not detected anymore. is there some kind of way to...
-
- 16 Posts - OzarkEdgeI've added a wired backhaul MoCA 2.5Gbps to my AiMesh, limited to 1GbE at the AC86U node WAN port. This wired backhaul has 3 segments, Ethernet at each end and MoCA in the middle. The AiMesh Ethernet Backhaul Mode system setting is set to the default disabled. Some observations... A) If the...
-
D- 4 Posts - dlukanidinAX88U 3.0.0.4.388_20518 AiMesh node info shows abstract icon not from device but DHCP static table shows right icon (I don't know from where it copies icon to /jffs/usericon). Anybody know how to set right icon?
-
J- 1 Posts - jataI have been trying (and failing) to solve this issue for about 18mths - since I bought 3 x homepod minis and have them in different rooms connected to different routers (nodes and main router). As context, I have a long home on one level with main router (AX86U) in the middle and 2x AX58U as...
-
C- 6 Posts - ComputerSteveI recently upgraded my AC-5300's to wifi 6 by getting the RT-AX55's. I did this mainly because i'm having a weird throughput issue. I thought that maybe it was an issue between compatibility of my GT-AX11000 and AC nodes but i'm noticing that still with the RT-AX55's wifi speeds are cut in like...
-
L- 3 Posts - lambertWxI have an AIMesh system with two routers: RT-AC86U is the main (running firmware 3.0.0.4.386_48260), and an RT-AC68U as an AIMesh node (running firmware 3.0.0.4.386_48262). My problem is that when I view the list of wireless devices connected to each AIMesh node (via...
-
- 2 Posts - OzarkEdgeMiscellaneous AiMesh musings... AiMesh notes: *AiMesh supports the 802.11k/v standard. I wonder if this support is independent from using Roaming Assistant, which I believe was available before 802.11k/v support? My clients roam fine with RA disabled... and I think I would still want them to...
-
- 4 Posts - garycnewAll: Does the Asuswrt WebUI CPU Graph include AiMesh Nodes? I've notice that when I execute a high cpu and zero bandwidth command on an AiMesh Node that it seems to be reflected within the Asuswrt WebUI CPU Graph. Thanks. Gary -
Z- 6 Posts - ZippaksHello guys. I am little desperate... I am using Aimesh 2x AC 86U, both firmware version 3.0.0.4.386_40451-g30f1b6c. I have 2 printers, both wired connected to the routers(with static ips). Also i have 2,4ghz and 5ghz networks. Sometimes It shows that one or two of the printers are offline but...
-
M- 5 Posts - MadGoatHello, Due to location constraints, I cannot plug both WAN connections into the main router. I'm curious is the config in the included diagram is possible? (One WAN would be failover only, not looking to bond or aggregate)
-
A- 4 Posts - ariesjunkMy Aimesh routers cannot connect to ASUS server to check for the firmware update. I can manually upgrade the main router. However, I cannot do the same for the nodes as they do not show up on the firmware upgrade page. How can I upgrade the node firmware?
-
D- 2 Posts - drabisanHi, I tried asking Asus directly, but no answer so far. I'm using Ethernet Backhaul Mode and I intend to keep using it as it allows using all radios. (In Europe having the 2nd 5GHz radio on DFS channels allows higher power; I'm keeping one 5GHz radio on U-NII-2A so every client will be able to...
-
H- 6 Posts - herblI am going to create a Aimesh Home Network using Asus Routers, Main Router and 2 Nodes. I understand that all Routers need to be upgraded to the latest firmware and then Factory Reset. Question: The Main Router will be a newer different model than the 2 Nodes so, do I upgrade the same firmware...
-
X- 10 Posts - xScoutxHi all, first time poster, long time reader. Thanks for the help over the years. I have an AC86u as my main router on Xfinity cable internet. I have 3 Lyra's and 1 AC68U as nodes in my mesh covering a larger two unit home and outbuilding. The Lyra's are in ethernet backhaul with the 68 using...
-
O- 58 Posts - OleksandrHi All. I have two devices AiMesh setup with stock firmware (upgraded to the latest version) - AX88U as the main router and AC68U as a node. There is wired connection between them. The device connected to the main router shows ~920 Mbits/sec in iperf3 test. The same device connected to the node...
-
J- 1 Posts - joloxx9Hi all, I have a question, currently I am running following setup: Virgin superhub 3 -> RT-AX86 - -> Wired - PC -> WIFI - TV, PS5, one laptop, 2 phones ( galaxy s21) I have one node at home for AIMesh - RT-AC55. I am going to replace RT-AC55 with RT-AC68U, which has 386 firmware, works...
-
M- 4 Posts - mogulmanI currently have an RT-AX86u as my main router and an RT-AC86u as a node. I'm getting another RT-AX86u. Can I just remove the old node and add the new AX86 as a node? or do a I need to reset the main router first?
-
B- 4 Posts - BL_BLI'm having some issues with a AiMesh setup/network and specifically WhatsApp phone calls (but other applications might have problems as well I guess). Problem occurs when moving inside the house and presumably when switching AiMesh nodes. The setup I have is 1 x RT-AC5300 (main router) and 4 x...
-
F- 5 Posts - fr33z0n3rFor anyone having AIMesh node add issues, here is my simple (but annoying) fix. I just troubleshot my first AIMesh setup attempt an hour ago. It seems like it doesn't setup unless you have a wired (ethernet) connection between each router. Both are on their latest firmwares, and both had...
-
G- 9 Posts - ggman8988Hey folks, I need MOCA setup help urgently... I have Internet coming in via Moca Filter and that passes COAX splitter to each room. Sadly, my home doesn't have infrastructure setup for ethernet cable to each bedroom, so I have modem placed in basement. So currently it's setup like below...
-
A- 74 Posts - ASUSWRT_2020Hi there, We recently have new build of RT-AX89X and ZenWiFi CT8, both are Qualcomm platform. If you have these two, and would like to try, please download from here: ZenWiFi CT8 (AiMesh 2.0) https://www.asuswebstorage.com/navigate/a/#/s/BA6E66D7E5F14FEDB43B582697880651Y RT-AX89X...
-
S- 158 Posts - SwindiffHi I have a simple AIMesh network with an RT-AX88U as my main router and an RT-AC86U as the only AIMesh node. I was a bit disappointed to find that Guest networks were not supported using AIMesh, and then happy to find out that this functionality had been added with a firmware update. I...
-
H- 6 Posts - helloguysI searched but couldn't get a definite answer. Smart Connect (band steering) is not supported on older models such as RT-AC68U. What if we use a newer model as AiMesh router and enable Smart Connect, then use older model as AiMesh node? For instance, use RT-AC86U as AiMesh router (with Smart...
-
B- 9 Posts - BeeJayVeeI haven't seen any activity on this subject for a long time now. Even though I also haven't seen any official notice that the beta program has ended yet, the earlier threads aren't sticky anymore, so maybe that should be a hint about the beta being over(?). At any rate, I have seven routers in...
-
W- 2 Posts - WMarany update of beta for RT-AC5300 & TUF-AX3000? 2 months already, it seems unusual for such long time
-
D- 73 Posts - David Sullivan@ligeza -- Would you mind sharing firmware for the Lyra MAP-AC2200? I see in the original RC1/RC2 threads mention of Lyra support. I am currently using AI Mesh 1.0, but would like to upgrade all of this to 2.0 and dont see a Lyra MAP-AC2200 386 bios Here's my network list and the AI mesh...
-
N- 2 Posts - nikrI only have one Asus router that support AiMeash so cannot test it out myself. I know Guest Network #1 syncs to all nodes but is it possible to enable Guest Network #2 on AiMesh node only? I do not care about it syncing to other nodes or main router as long as its isolated from main network and...
-
J- 3 Posts - _Jon_I have one RT-AX86U acting as my main router, and a second one acting as an AiMesh node. they are connected together using their 2.5 gbe ports. The main router is then connected to an unmanaged gbe switch which delivers wired ethernet to several rooms in my house. I have noticed on the GUI...
-
M- 5 Posts - MattynzHey guys, I’m hoping someone may have the same two routers, and has managed to get aimesh working. I have tried countless times to get the main router (AX86u) to find the node (AC88u), and it has never found it during a search. I’ve made sure both routers are on the latest firmwares (tried...
-
M- 5 Posts - mogulmanI have an RT-AC86u router and an RT-AC1900p as an AP. Wired Ethernet between the two. Latest GA Firmware (no merlin currently). Mostly I have PCs, tablets, phones and a lot of smart devices. Using a single SSID right now for both 2.4 and 5.0. I tried Aimesh 1.0 when it came out in beta...
-
- 13 Posts - ntb-2k5I've setup Aimesh since it very 1st release and it's now onto version 2.0 and I'm still can figuring out how to Enable USB Printing on a AiMesh Node. I've used a DD-WRT router as an AP to be able to network my USB printer. Has anyone know how to configure the USB Printer on a AiMesh Node? PS... -
N- 6 Posts - NinkoHi, I have a RT-AX88U as the main router and a RT-AX58U as a node. When selecting WPA2 my Samsung S8 phone will happily switch to the node, but when selecting WPA2/WPA3 it refuses. Now I know my phone's doesn't support WPA3 but as I'm selecting both security standards it should just connect...
-
M- 3 Posts - MvWHi @OzarkEdge, I was reading through your installation notes which you pointed me to last week, and got confused when reading this: Is this still valid (given the age of your original posting)? When running Asuswrt-Merlin (I haven't made the switch to stock yet, see my previous post), I was...
-
F- 7 Posts - FullScreen57All three have been upgraded to the latest firmware - Version 9.0.0.4.386.41994 (Beta Version), are spread out over three floors, hard-wired and assigned static IP addresses. Basement: Fios ONT box ==> Router1 [Wireless router mode / AiMesh Router mode (Default)] ==> switch Floor 1: Ethernet...
-
S- 15 Posts - sivaprasathHi Asus Support, Can you please provide an option to choose Wireless Control Channel for AiMesh nodes? Currently, we can choose the Channel selection for AiMesh Router, but this is not available for AiMesh node. If there is any workaround available for this, please let us know. Thanks.
-
H- 21 Posts - hancoxHad this thought, but wondering if anyone else has come to this conclusion. Asus adopting standards meant to make handoff between AP's better should reduce or remove the need for RA. In theory, RA could be used to force a disconnection for problematic clients, but you can't set this at...
-
P- 1 Posts - princiThe 4G-AC68U supports AiMesh 1.0 in node mode. Just wondering whether this model is going to make the leap to 386? If so, it will probably support AiMesh 2.0 as well.
-
B- 5 Posts - blacktop_Hello, Thanks for your help in advance. This is complicated, for me, please be patient and if I missed a similar post, please let me know. Objective: Share wifi with neighbour, running cable not an option. Goal: use aimesh to have guest wifi at remote site All Firmware 386...
-
J- 5 Posts - JoshSI have an AX86U with an AC68U as a mesh node with Ethernet back-haul enabled. It was working great until I updated the firmware on the AC68 from 384 to 386. Now the link speed is only 10/100 when before it was 1000. Has anyone else had this issue? My AX86 is on the newest not beta 386.41935...
-
V- 14 Posts - vandykej17Hi, first post here. I have read a lot of threads on here recently about fixing my issues with not finding my AiMesh node. Some backstory: I had a 66U_B1 as my main router along with a switch in my basement to wire in more devices Got a 68U yesterday to use with AiMesh, replacing the switch...
-
- 3 Posts - Thw0rtedI've had some network instability with my 3x RT-AX92U mesh over the last few days, and the flaky periods roughly correlate with some unusual error messages in the logs. I've reproduced a representative sample in the attached log file, but it breaks down to "PSM microcode watchdog fired", and...
-
D- 7 Posts - DaigI use dsl-ac68u as the main route Now I want to build a VPN server with ipsec/lt2p protocol on the router. dsl-ac68u supports only openvpn and pptp. The latest firmware of dsl-ac68u is Version 3.0.0.4.386_39648. Does 386 means that dsl-ac68u supports already aimesh 2.0? (Not in changlog) If...
-
A- 498 Posts - ASUSWRT_2020Update on 2021/1/29 This version changed the DNSmasq version to 2.84 to fix CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25687, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686 aka DNSpooq https://drive.google.com/drive/folders/1TW9JXxWpM-qmgGv2BixibkACVki-9g1Q?usp=sharing The share...
-
H- 3 Posts - Harsha Tarak Ri flashed Merlin on to my RT-AX88U later i flashed stock firmware but it dint flash so i used Firmware Restoration and flashed Version 3.0.0.4.384.9579 later Aimesh Icon on the lest of the General tap disappeared even the speed test option on Adaptive Qos disappeared what to do please help me.
-
K- 6 Posts - komradekristophHi all, Happy New Year! I'm new to AiMesh so was hoping someone could advise on the issue I recently faced, I have the following equipment below: GT-AC5300 AiMesh Router mode Tri-band H/W Ver: A F/W Ver: 3.0.0.4.384_82037-g0cfb8f0 RT-AC86U AiMesh Node Dual-band H/W Ver: R1.5 F/W...
-
T- 15 Posts - TolkeyHi everyone. I think that my knowledge is not sufficient to sort this issue out, so I hope someone here has an idea. I have three ASUS Routers in a triangle AiMesh mode: one RT-AX88U (main router) and two RT-AX92U (nodes), working without any ethernet backhaul. This setup worked perfectly fine...
-
F- 20 Posts - felix0315I was looking to see if anyone else has figured out a way to resolve the aimesh node dropout issue. I came across a reddit post with the exact same title. The post suggested adding nodes to the roaming block list. Does this make sense to those familiar with the backend workings of AiMesh? I've...
-
S- 8 Posts - spkay31I have two RT AC-1900P routers setup in AIMesh with the main router in the middle of the house and the secondary mesh node 1 connected wirelessly up in my office on the far corner of the upstairs floor in my office. I really want the networked USB 3.0 hard drive on the network on the secondary...
-
J- 5 Posts - JohnD5000In AiMesh 2.0 System optimization: one click in AiMesh to optimize the topology What does this mean? What does optimizing the topology actually do? Thanks
-
Q- 1 Posts - QbcdThis is a very minor thing, but I was tweaking some settings and suddenly my AIMesh nodes' icons changed from pictures of the actual routers, to these generic ones. It seems to be purely cosmetic, everything still works, but I'm wondering what triggered that and if anyone else has seen this. Any...
-
M- 4 Posts - Mine OngGreeting, I am wondering if there is a mechanism to force a client (notebook) to connect to a wired AiMesh node instead of another node what uses wilreless backhaul? I am using multiple AC86U as AiMesh router/nodes. One particular node is connected to another wired node wirelessly...
-
J- 6 Posts - jay613I keep expanding my AiMesh network with cheap Asus routers from Ebay. I love this! But along the way I've acquired nodes that are faster than my router. I should use the most powerful one as the router. But I've made a lot of configurations .... I've named all the clients, I've given...
-
- 4 Posts - SandmanXXIs it normal for a AX55, as an Aimesh node, with latest beta 386, to show to be in 'repeater mode' in the android app? And another question.. also in the app, while in the node's page, after hitting the wifi button, it doesn't show the 5gz radio? Just the 2.4. Thanks! -
- 7 Posts - Thw0rtedI have three RT-AX92Us configured as mesh in AP mode. The primary is set to a static LAN IP, but as far as I can tell there's no way to assign static IPs to the nodes. It's been mostly stable, but I've had a few weird outages lately where devices will be able to connect to one node but not...
-
M- 17 Posts - MicharlieI only want to use 5ghz in the house. However, there is no way to disable the Aimesh node's 2.4ghz radio. Can someone tell me how to? What is the script? I will need to SSH the script from the main/Aimesh router, right? Also, is there anyway to disable the 2.4ghz radio if I was using the...
-
C- 4 Posts - charlesb224OK, I've been a very long lurker to SNB, and I have to say that i have learnt an amazing amount about networking here and taken a lot of the great advice from people here. so a big thank-you upfront. I've had network equipment since around 2004, starting off with Netgear and then moving...
-
- 6 Posts - trevorklatI have an Asus RT-AC5300 set up in AiMesh mode with an RT-AC86U as a mesh node. Can I add a TP-Link Archer A6 as an additional Access Point to this mix? That is, I know the Archer A6 won't be an AiMesh node like the AC86U is. Can you mix AiMesh nodes with Access Points? -
B- 7 Posts - brianmsailingwith Aimesh 2.0 will separate wifi channels be supported when wired backhaul is used between the nodes?
-
J- 2411 Posts - jsbeddowPretty cool developments, can't wait to finally try these long awaited 386 versions once they are finalized as a general release in the form of an @RMerlin firmware (once some more time goes by waiting for the GPL of course).:):cool:
-
M- 5 Posts - morbidz288Currently have AiMesh setup with RT-AC88U as primary node and an ethernet back-hauled RT-AC1750-B1. Just purchased RT-AX58U and trying to decide whether to just add it as another node or make it the primary node in the mesh. If I decide to make AX58U the primary node, do I need to start my...
-
- 6 Posts - endorI recently stumbled upon an issue and would like to share this with you hopefully it could help if someone else has the same problem. This may not be limited to the specific model, i assume it could be applicable on others as well. Had two RT-AC66U B2 from 2019 in aimesh which was working well... -
- 3 Posts - mlaiAfter all these years and Asus still doesn't get AiMesh right..... My AiMesh Wishlist..... 1) GET GUEST MODE RIGHT ACROSS ALL NODES!!!! I am running Zenwifi XT8s and the guest networks only appears on the main node. All of the AiMesh capable routers and APs support guest ssids, so why can't... -
- 13 Posts - amorakHello all, Wondering, I have an AC68U running as a node on an aimesh network with an AC3100 as the primary router. I have an IPTV nearby that's flaky on wifi that I'd like to plug into the ethernet port on my node router, can I do that, or are the LAN ports inactive when configured in aimesh...
-
J- 7 Posts - JustlocoHello everyone. Here's the issue I am having. I just recently purchased the GT-AX11000 router, which I'm very pleased with. The problem is trying to connect my RP-AC68U in AiMesh mode. When I try to use the Asus router APP to connect it as a node it never finds the RP-AC68U or through the GUI...
-
B- 11 Posts - bones20Hi All, I have an Aimesh setup at home for the last 2 years: APs (RT-AC68u) * 2 Firmware: 3.0.0.4.384_45717 (although tried all including latest) Config: Fixed channels, 20MHZ for 2.4ghz, disabled these (airtime fairness, beam formations (except ac), Nat acceleration), everything else default...
-
- 4 Posts - OzarkEdgeAiMesh = router/AP + nodes = root node + remote nodes AiMesh restricts guest WLANs to the root node, presumably because guest WLANs on remote nodes (as on traditional wired APs) would not restrict guest access to the LAN... not yet anyway. I know this to be true when the root node is in AiMesh...
-
M- 20 Posts - ManfredHHello! I'm getting a little desparate. Since I changed some things in my network environment I can't seem to get a stable WiFi connection. Following setup: Cable box by ISP - all routing/wifi functions deactivated, it only provides cable internet via LAN ports RT-AC68U_white (Asuswrt-Merlin...
-
N- 11 Posts - NihilimHello, I can see on the forum that there is a lot of dislike regarding AiMesh. I really want to use it and it worked fine until a week ago. If anyone has the time and energy, please read my post and see if you can give me any advice. Mu initial setup was 2 x RT-AC68U and this worked...
-
M- 41 Posts - maxbraketorqueI've had my two router setup at home operating in AP mode for about a year. When I first set it up, devices wouldn't readily switch from one AP to the next, so I had to use the Roaming Assist feature to encourage jumps. Merlin had mentioned in recent months that ASUS is now incorporating...
-
Z- 9 Posts - ZippaksHello guys. I am trying to build stable internet for my office but I am little confused. I have like 50 clients(10-15 on each node) in my AIMesh(2x AC-86U + 2x AC-1900U). For the last months I was using the default settings but my two AC-86U obviously had problems with that. Every day one of...
-
- 5 Posts - pdcHello, I have two AC-86U set up in an AiMesh configuration, and the actual AiMesh node has a full complement of LAN clients (upstairs computer, printer, laptop, HDHomeRun) The problem is I want to add a fifth LAN client (Raspberry Pi). I would love to be able to use the "extra" WAN port which... -
E- 4 Posts - ErikxSo I'm running aimesh with 2 ac68u nodes and 1 ax58u as router. If I go to 1 node and gets connected to it and then go back in range of main router, i then get 3-50 up and down. If i turn on and off my wifi i will get 250-400up and down. This is really frustrating, any idea why this happens ...
-
L- 5 Posts - Larkin BarkinHi! Hoping someone can help me solve this puzzle. I have an ASUS RT-AC68U, with the latest firmware installed (3.0.0.4.385_10000 ). I also acquired a TM-AC1900, which I successfully re-flashed into the same (latest) firmware as my AC68U. The TM box seems to be doing great, but...when I...
-
C- 8 Posts - cyclone3211Have two RC-AC86U in a AiMesh setup. Can search for the node and find it. Can't get to the master. When doing a Device Discovery, I do get an IP Address of 192.168.50.35, but can't reach it through "Configure ". I get the node on my phone but never the master nor through the web. It does...
-
A- 4 Posts - adambeanHey all, After some support received here in the past, my routers (GT-AC5300, RT-AC5300, RT-AC66U B1 - with wired backhaul) have been rock solid for quite some time. Finally gave up on bailing on the system as things were ... perfect for several months. As of late, we're regularly running into...
-
C- 2 Posts - conconsalHelp. wifi logs on and off. I struggle with network connectivity log off and on to wifi all my divices Lose contact with wifi. I have RT-AC86U as router and 2x RT-AC67U as nodes (wired to router) using latest framware.
