Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. knubbze

    HELP - USB disks no longer working!

    Just tried that; unfortunately, no change. Any other suggestions? I also just upgraded to 380.60 beta 2 to see if that wiuld fix it, but again, no good.
  2. knubbze

    HELP - USB disks no longer working!

    I power cycled my AC68P running merlin 380.58 earlier, and upon reboot, discovered that the two drives connected to it (one 2TB 2.5 external HDD and one 16GB flash drive, both USB 3.0) were no longer being found. The web GUI says "No Device" for either of the ports, and neither of them are...
  3. knubbze

    Asuswrt-Merlin 380.59 is now available

    Has anyone else had problems with SMB shares with this release? I upgraded from .57 to .59 and now am unable to access my SMB share from my Windows 7 boxes: Strangely, I can still access the share fine from my Android devices. If I flash .57 back, the problem disappears. I have not changed...
  4. knubbze

    USB HDD connected to USB 2.0 port on RT68P being mounted with '(1)' appended to the disk label

    Well, as I stated in the first post - this HDD is connected to the USB 2.0 port, not the 3.0 port. I do also have a USB 3.0 flash drive connected to the USB 3.0 port, but the problem didn't happen with this drive/port. Sent from my Nokia 3310 using Tapatalk
  5. knubbze

    USB HDD connected to USB 2.0 port on RT68P being mounted with '(1)' appended to the disk label

    Well, I'm glad to report that I have rebooted the router 3 times this evening, and each time the drives were mounted correctly. I wanted to be extra-sure, so I enabled 'Reduce USB 3 interference', waited for the router to reboot (it appears that toggling this setting triggers a reboot), and...
  6. knubbze

    USB HDD connected to USB 2.0 port on RT68P being mounted with '(1)' appended to the disk label

    I will reboot the router a few times this evening and will report back. *fingers crossed* Sent from my Nokia 3310 using Tapatalk
  7. knubbze

    USB HDD connected to USB 2.0 port on RT68P being mounted with '(1)' appended to the disk label

    I just checked the setting, and 'Reduce USB 3 interference' was enabled, so I disabled it as you suggested and rebooted, and guess what - both drives now mounted properly! I will reboot another few times over the weekend to make sure that this setting resolves the issue, but thanks so much for...
  8. knubbze

    USB HDD connected to USB 2.0 port on RT68P being mounted with '(1)' appended to the disk label

    Incorrect - I edited the post because I had wondered if that was the issue, so I reformatted the drive to ext4 and the same thing keeps happening. I am still looking for help to fix this.
  9. knubbze

    Entware-arm - synced with Entware (mips) 2015.09

    Hmm, further to the above, this post at the start of this thread mentions installing and running hubicfuse, but it doesn't seem to be available in the Entware-arm repo...
  10. knubbze

    Entware-arm - synced with Entware (mips) 2015.09

    zyxmon, could I please request that 'hubicfuse' is added to the Entware-arm repo? It's available for MIPS Entware. Many thanks, knubbze
  11. knubbze

    USB HDD connected to USB 2.0 port on RT68P being mounted with '(1)' appended to the disk label

    That seems to be a slightly different issue than mine, and I've had this problem with every version of Merlin's FW.
  12. knubbze

    USB HDD connected to USB 2.0 port on RT68P being mounted with '(1)' appended to the disk label

    Nope.
  13. knubbze

    USB HDD connected to USB 2.0 port on RT68P being mounted with '(1)' appended to the disk label

    No, as I said above, the disk label isn't the issue here. I appreciate you trying to help, but perhaps someone else might have more insight into this problem. Sent from my Nokia 3310 using Tapatalk
  14. knubbze

    USB HDD connected to USB 2.0 port on RT68P being mounted with '(1)' appended to the disk label

    The problematic drive is NTFS. Sent from my Nokia 3310 using Tapatalk
  15. knubbze

    USB HDD connected to USB 2.0 port on RT68P being mounted with '(1)' appended to the disk label

    Again, that's not the issue. The other drive also has a number as the first character of the disk label and doesn't have this problem. Sent from my Nokia 3310 using Tapatalk
  16. knubbze

    USB HDD connected to USB 2.0 port on RT68P being mounted with '(1)' appended to the disk label

    I have assigned it a label; that is not the issue here. Sent from my Nokia 3310 using Tapatalk
  17. knubbze

    USB HDD connected to USB 2.0 port on RT68P being mounted with '(1)' appended to the disk label

    I am experiencing an annoying and seemingly random problem with my AC68P running Merlin's AsusWRT 378.55 (but the problem has persisted with every version that I've run so far). The issue is that the USB HDD connected to the USB 2.0 port is sometimes mounted with '(1)' appended to the disk...
  18. knubbze

    Entware-ARM swap file problem

    I did run mkswap on the swap file - it is specified in the tutorial that I refered to in the first post.
  19. knubbze

    Entware-ARM swap file problem

    My /etc/fstab is an empty, 0-byte file - should it not be?: -rw-r--r-- 1 adm root 0 Jan 1 1970 fstab
  20. knubbze

    Entware-ARM swap file problem

    So I edited the scripts as suggested, but still no swap is allocated. I even tried reformatting the USB drive as ext2 and setting everything up again, but then I decided to look in the syslog and saw some I/O errors: http://pastebin.com/uKPvN6v9 This is occuring immediately after formatting...
Top