Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. terminator

    Repeater mode and AiMesh

    I now have the aimesh nodes hardwired with cat6 to future proof them but previously they were running wireless and there was no noticeable difference. I have 100 mbps up/down from ISP. So, thanks for this as it is important to point it. Even with a 1gbps connection, how many internet...
  2. terminator

    Beta Asuswrt-Merlin 386.1 Beta is now available

    lol. If you connect the router to Alexa (alexa based device such as echo, etc) and then tell the smart speaker "turn on guest wifi" or "turn off guest wifi", it will target the third one.
  3. terminator

    Resetting router during upgrade

    Unfortunately, I have hundreds too. There are about 50 devices, half of them I don't like the generic dns names so I have changed it to be easily identifiable (figuring out what the device is by it's generic name is a challenge on its own), then I don't run the router on the default gateway ip...
  4. terminator

    Resetting router during upgrade

    Most router upgrades instruct that resetting the router is either required or strongly encouraged. While I can understand why from a code prospective, I don't want to do this from an end user prospective mainly because there are hundreds of settings that I don't want to type manually again and...
  5. terminator

    Release Asuswrt-Merlin 384.19 is now available

    I am able to log-in in the morning. Unsure if it "healed" overnight, we will find out!
  6. terminator

    Release Asuswrt-Merlin 384.19 is now available

    After upgrading AX58u to .19 from .18, httpd/web interface seems to only load 10% of the times - login page shows up after restart, but after that nothing. Not sure if this is related to jffs? I took a backup but without the web interface, unsure how to restore it.
  7. terminator

    AC1200 as aimesh node?

    It says "support Aimesh" in the title but that could be misleading marketing. I see a review where Aimesh didn't work for a user - which is what prompted my question on this forum.
  8. terminator

    AC1200 as aimesh node?

    Asus should really make a aimesh "node only" device that is small and can mount on the wall/ceiling for under $50 :)
  9. terminator

    AC1200 as aimesh node?

    hmm.. its in the product title https://www.amazon.com/dp/B07GBYKWGW/?tag=snbforums-20 but saw no merlin firmware so was skeptical.
  10. terminator

    AC1200 as aimesh node?

    I am looking for a couple of hardwired aimesh nodes around the house but it would be nice if they are small, can be mounted on the wall and are somewhat cheaper than the full router (as the nodes don't have to do the same amount of heavy duty work as the main router). I see AC1200 is a potential...
  11. terminator

    AIMesh between AC and AX?

    I have a AC86u already on merlin firmware. Although, it works fine the 5 Ghz band does not reach many parts of the 3 story house. I am thinking of getting another with hardline backhaul to use in a AIMesh setup. My question is if the AX models will work with AC86u? They seem to be the same price...
  12. terminator

    AC-86U and getting WAN IP on restart

    Tried that with no luck. I don't think it has much to do with ISP because from router when I manually disable, then enable WAN, it works 100% of the times. Seems like whatever the WAN disable/enable does, needs to happen at the startup.
  13. terminator

    AC-86U and getting WAN IP on restart

    Yeah, presumably IP is assigned by DHCP. "Aggressive" was already selected by default. I could have sworn this used to work (getting an IP instantly on restart) a few versions ago.
  14. terminator

    AC-86U and getting WAN IP on restart

    Merlin 384.16. IPV6 is disabled (was never enabled on this router).
  15. terminator

    AC-86U and getting WAN IP on restart

    I have an AC86U and I am on the latest firmware. For the last few firmwares [can't remember exactly when this behavior started], I have noticed that when the router is restarted [from the UI menu, have not tested unplugging it], it does not get a WAN IP on it's own. The router is connected via...
  16. terminator

    Different client IP to be able to connect to corporate VPN

    Yup, using Mac.
  17. terminator

    Different client IP to be able to connect to corporate VPN

    My Router RT-AC86u is 10.1.1.1 and assigns IP from 10.1.1.100 to 10.1.1.200. I have a lot of settings and apps pointing to IP addresses so I don't want to change this. I have to use Cisco Anyconnect (from a PC) to connect to my work at I don't know what it's internal IP is but it gives out...
  18. terminator

    RT-AC86U more than 90% ran usage normal?

    I have had this router for a couple of years on Merlin firmware but didn't get a chance to do any add-ons. A couple of days ago I installed some. I used to have ~70% memory usage. Now, I have - - Open VPN Server (was running before). - AMTM - Diversion with PixelServ - Skynet - AI Trend (was...
  19. terminator

    pixelserv pixelserv - A Better One-pixel Webserver for Adblock

    ahh, got it. I misunderstood how it works. I thought https://ads.google.com would get redirected to https://routerip/.. and the certificate was for that.
  20. terminator

    pixelserv pixelserv - A Better One-pixel Webserver for Adblock

    Sorry, I am new to this and also have been reading some recent comments about cert expiration date changing so apologize if this has been asked before - Option 1: what if a new certificate was purchased for domain https://pixelserv.com (not the Root Certificate Authority, just a regular https...
Top