Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. G

    Two RT-AC86Us, two years apart, newer one main router?

    Thanks for the input. Original Router: RT-AC86U HW Ver: R1.5 Made In China Production Year 2018 New Router: RT-AC86U HW Ver Not Listed (it has been removed from the Sticker, which sounds consistent with other posts) Made in Vietnam Production Year 2020 I ran the new router for a bit as the...
  2. G

    Two RT-AC86Us, two years apart, newer one main router?

    I appreciate the reply. I remember early on in this model's lifetime there were some complaints about the 2.4 GHz radio failing as well as heat / fan concerns. That was the main motivation for asking, but no issues with my current device so I think I'll leave it be. Thanks again.
  3. G

    Two RT-AC86Us, two years apart, newer one main router?

    I bought an RT-AC86U in Feb 2019 and have been running Merlin since its birth. I just bought a 2nd RT-AC86U to enable AiMesh, wired backhaul. Is anyone aware of any tweaks/changes/upgrades to HW/cooling/etc of the RT-AC86U over the last two years that would warrant me putting the new one in as...
  4. G

    ASUS RT-AC86U firmware release 3.0.0.4.384.45149 12/05/2018

    If it's that bad, have you considered downgrading to an earlier firmware? Any issue with that folks? Just wondering if 45149 can be properly downgraded.
  5. G

    ASUS RT-AC86U firmware release 3.0.0.4.384.45149 12/05/2018

    Yeah, I've been following. Thanks for the reply. I've also read about a lot of 2.4 GHz radio issues, but not sure that's tied to FW version (seems HW). I still have a number of 2.4 GHz devices, so was hoping to keep that stable as well.
  6. G

    ASUS RT-AC86U firmware release 3.0.0.4.384.45149 12/05/2018

    So .45149 isn't happening in my house, any thoughts on the most stable fw version besides the latest?
  7. G

    RT-AC68U types Firmware version 3.0.0.4.384_45149 for RT-AC68U/R/W/P, RT-AC1900/U/P and RT-AC66U_B1

    What do you mean by "still cannot update DHCP reservations?" I had a similar issue where anytime I added a DHCP assignment/reservation, it would be blown away upon reboot.
  8. G

    ASUS RT-AC86U firmware release 3.0.0.4.384.45149 12/05/2018

    I see the number of clients in the client list jump all over the place just like you describe since going to this latest FW 2 days ago. I also see a constant "Assoc" and "Disassoc" messages with a MAC address appended to each within the system Log every 5-10 min. Not sure if there's a relation.
  9. G

    Manually Assigned IP List Gone After Reboot

    Thanks for all of your help. I've performed a factory reset (along with a firmware update that released today for Asus stock). I did another factory reset after the firmware update completed just to be sure. I've entired a manual assignment and rebooted. So far, so good. I went back and...
  10. G

    Client Names mostly just MAC addresses

    Agreed. Same thought here.
  11. G

    Manually Assigned IP List Gone After Reboot

    admin@RT-AC86U:/tmp/home/root# nvram get jffs2_format admin@RT-AC86U:/tmp/home/root# No value returned. I actually just assumed Reformat JFFS was unique to Merlin, as I don't see it in stock (unless I missed it).
  12. G

    Manually Assigned IP List Gone After Reboot

    Reformat JFFS at next boot: is that in Merlin only? If I stay on ASUS stock, how is that accomplished?
  13. G

    Manually Assigned IP List Gone After Reboot

    Also, should I start over differently than usual to ensure this gets wiped out? I was just going to Restore Factory Defaults in the Administration tab. Would going to Merlin change anything in this scenario (I know your fork won't work b/c of newer code base)?
  14. G

    Manually Assigned IP List Gone After Reboot

    admin@RT-AC86U:/tmp/home/root# ll /jffs | grep nvram drwxrwxrwx 2 admin root 0 Dec 4 19:35 nvram/ admin@RT-AC86U:/tmp/home/root# ll /jffs/nvram -rw-rw-rw- 1 admin root 66 Nov 7 07:35 asus_device_list -rw-rw-rw- 1 admin root 49 May 4 2018...
  15. G

    Manually Assigned IP List Gone After Reboot

    So anything else I should try or capture before I perhaps reflash/reset/clear and start over?
  16. G

    Manually Assigned IP List Gone After Reboot

    So actually, the error you pointed out with the < field separator occurred when I clicked on the DHCP Server tab. The Learn More link is this...
  17. G

    Manually Assigned IP List Gone After Reboot

    I see this when navigating to LAN page, but no additional errors after adding an assignment and then hitting apply. I am getting kicked out back to login after hitting apply (I don't remember that happening previously). unreachable code after return statementhelp.js:33 Synchronous...
  18. G

    Manually Assigned IP List Gone After Reboot

    btw, I just tried to add an assignment via GUI and then reboot. No dice, table was empty.
  19. G

    Manually Assigned IP List Gone After Reboot

    Anyone have an 86u that can test this??? Seems weird if I'm the only one....
  20. G

    Manually Assigned IP List Gone After Reboot

    So now what? Should I try to make assignments in the GUI and see if they survive a reboot? I really appreciate both of you guys. I've run Merlin and John's fork on a few RT-n66u's over the years. Maybe it's time for my 86u to get off stock as well....
Top