Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. G

    Recommended router/mesh solution, with capacity for 500 Mbit fiber

    Looks like the AC68Us are also performing well as aimesh nodes. Might be because they dont have to handle NATing? Or they are simply more powerful than the AC66U. Getting full speed on a computer wired to the one in the garage. And easily 350 Mbps via wifi to my phone, even on a floor below...
  2. G

    Recommended router/mesh solution, with capacity for 500 Mbit fiber

    Why do you see aimesh as any different than the TP link solution? They are not acting as routers when connected as aimesh nodes. Anyway, got the chance to test with another router now, so the current setup now is ISP fiber router with two connections: 1. AC66U B1 for the apartment, has been...
  3. G

    Recommended router/mesh solution, with capacity for 500 Mbit fiber

    Thanks for thorough input. However... I would like to buy something that is ready out of the box. I have had my years with my own servers on various *n?x and BSD distros for various tasks, and I have now given myself completely over to anything ready to run - and cloud based. Even the two NAS...
  4. G

    Recommended router/mesh solution, with capacity for 500 Mbit fiber

    Yes, you are correct, obviously I only need one router, what I was trying to say is that I want to have three APs in total, one also being the router. The router is located in the technical room on the first floor, then I have one AP at the 3rd floor, and one AP on the loft of the separate...
  5. G

    Recommended router/mesh solution, with capacity for 500 Mbit fiber

    I have a 500/500 Mbit fiber connection. One router is not enough, it has to be some sort of mesh network, due to the size of the house. My current configuration is three Asus routers (AC68U/AC66U B1), and whilst they do offer enough range both outside and inside, they are unstable (the...
  6. G

    AC68U mesh net and 500 Mbps fiber

    And I do understand that part of it, but even when there is basically no traffic from other clients, I get say 350 Mbps on the Asus 5 Ghz, change over to the wifi on the ISP supplied Zyxel router, and I get basically 500 Mbps immediately. Same client, routers are located right beside eachother...
  7. G

    AC68U mesh net and 500 Mbps fiber

    Hi, I have a 3700 sq ft three story house, a double external garage and a 500/500 Mbps fiber. 1st floor of the house is concrete. I have a technical room almost centered in the first floor. I have the Zyxel router from the ISP there, as well as my AC68U configured with aimesh and two aimesh...
  8. G

    Isolated network (incl wifi) for rental apartment

    Your post made me look into the ISP router again, reset it (out of bridge mode), and found out that it actually has guest network ability, both for wifi and possibility of assigning a LAN port as well. Seems they have had some progress the later years (I received a new router a couple of months...
  9. G

    Isolated network (incl wifi) for rental apartment

    So if I keep my current setup, I can get a small managed switch, connect to a LAN port on the Asus main router, setup one port as a VLAN, and connect a wireless router for the apartment via that port, and the switch will prevent access to the rest of the network, but still allow internet access...
  10. G

    Isolated network (incl wifi) for rental apartment

    I have an apartment, in my home, thats being rented to unknown people, and I would like to isolate the network in the apartment from the rest of the house. My current setup is: - Inteno VDSL modem from my ISP, in DHCP bridge mode. - Asus RT-AC68U connected by cable, running in DHCP mode...
  11. G

    Aimesh AC68U only 5Ghz?

    I have the following configuration: 1st floor: AC68U, aimesh master 3rd floor: AC66U_B1, aimesh node, wired Garage: AC68U, aimesh node, wired Everything works well with one exception, the router in the garage only lights up the 5Ghz led, and even when standing right beside it, a phone...
  12. G

    Historical bandwidth statistics and real-time stats per IP not working

    I had it open just for two days during troubleshooting, so that I could reach it from work. Guessing there is a quite known vulnerability since it is most likely that the vuln in my router was found while scanning large IP ranges. Anyway, not an issue for me since it can all be done through a...
  13. G

    Historical bandwidth statistics and real-time stats per IP not working

    Goddamn this crap. As mentioned earlier I downgraded to 63_2, and just logging onto the router again now I was notified the admin site was occupied by 105.103.22.185. Rebooted through SSH, logged on, restored settings and upgraded to 64_2 again immediately, lets hope the hole he crawled through...
  14. G

    Historical bandwidth statistics and real-time stats per IP not working

    Downgraded to 380.63_2 and still same problem. I have now, three times, one on 64, and two on 63, managed to get the daily and 24h global traffic monitor working, but once I turn on IPTraffic it stops working and all I get are blank graphs, not even the XY-axis explanations (hours/bytes). Daily...
  15. G

    Historical bandwidth statistics and real-time stats per IP not working

    Yes, I answered as well, but I managed to quote the wrong post. This one was meant for you: "Appreciate it, good tip, unfortunately I have tried both options several times. :-(" I am not considering upgrade, but considering downgrading. Only thing I can upgrade to is beta/unstable...
  16. G

    Historical bandwidth statistics and real-time stats per IP not working

    As far as I can see from the installation instructions downgrading is not supported, so guessing that means full flash procedure. Any chance it will help? Are there any logs I could have a look at for further troubleshooting?
  17. G

    Historical bandwidth statistics and real-time stats per IP not working

    Anyone got anything here?
  18. G

    Historical bandwidth statistics and real-time stats per IP not working

    Appreciate it, good tip, unfortunately I have tried both options several times. :-( Sent from my iPhone using Tapatalk
  19. G

    Historical bandwidth statistics and real-time stats per IP not working

    Well.. tried another USB stick with no luck either. First with Fat32, but even after formatting it as ext3 in sh I have no luck with this thing. Unused 4GB stick. After formatting and selecting as custom location it looks like this: -rw-rw-rw- 1 admin root 6 Jan 8 11:05...
  20. G

    Historical bandwidth statistics and real-time stats per IP not working

    If I choose custom location and choose a path on the USB drive (tried in the root and in directories), only real-time traffic monitor (for the interfaces) work. Real-time per device and last 24 hours per interface looks like the attached files. If I however choose RAM the 24 h per interface...
Top