Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. e38BimmerFN

    Voxel Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.2.18SF-HW & v. 9.2.5.2.18.1SF-HW

    Ok, I'll be your guinea pig. o_O As long as TFTP is working I can recover to stock fw if it doesn't work. I'll let you know
  2. e38BimmerFN

    Voxel Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.2.18SF-HW & v. 9.2.5.2.18.1SF-HW

    Just curious if the reset button/Erase function in this version of FW works like stock FW or do we still have to TFTP or revert back to stock FW to do a factory reset?
  3. e38BimmerFN

    Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.1.17SF-HW

    Voxels FW only supports the 50 series RBR and RBS. I presume v2 as well, however not sure. Always better to have more memory. One can install Entware and Netdata to have a nice look at the system operations: https://www.snbforums.com/threads/bandwidth-monitoring-on-orbi.63561/#post-586720
  4. e38BimmerFN

    Bandwidth monitoring on Orbi

    Someone wanna give netdata a try using voxels FW and Entware? www.snbforums.com/threads/r7800-voxels-firmware-measure-wan-bandwidth.59553
  5. e38BimmerFN

    D-Link DIR-882 AC2600 MU-MIMO Wi-Fi Router Reviewed

    Wireless speed may vary depending upon environtment, noise and device design and support. Wired will always have more consistent performances over wireless.
  6. e38BimmerFN

    New GT-AX11000 firmware 3.0.0.4.384_9165

    One process that you can do to avoid is after you factory reset the asus router, do with ALL wired connections unplugged from the router. Accept for your one wired PC of course. Manually set up the router for your IP address and other needs. Once it's setup, do a full on reboot. When the reboot...
  7. e38BimmerFN

    D-Link DIR-882 AC2600 MU-MIMO Wi-Fi Router Reviewed

    Really? Something I haven't seen or have been forced to use since loading it on my 882. 3 lower case letters and 3 numbers here is all I use with v1.30 loaded.
  8. e38BimmerFN

    D-Link DIR-882 AC2600 MU-MIMO Wi-Fi Router Reviewed

    There is v1.30 available FYI.
  9. e38BimmerFN

    D-Link DIR-882 AC2600 MU-MIMO Wi-Fi Router Reviewed

    What version of FW are you using? Others are seeing high speeds over 5Ghz: http://forums.dlink.com/index.php?topic=75541.msg306625#msg306625 Yes the 882 has a known issue with USB drives: http://forums.dlink.com/index.php?topic=75307.msg305324#msg305324
  10. e38BimmerFN

    NAT filtering Option

    What NAT filers does changes the NAT kind used by the router. Secure means the NAT kind will be Port Address Restricted. When set to open, NAT kind will be Full Cone Nat which is an older NAT used and is a bit less secure then PAR NAT. Most router mfrs use PAR NAT now days. Only NG seems to...
  11. e38BimmerFN

    Voxel Voxel firmware

    Hoping that Voxels Orbi FW can be fixed so that if the factory reset button or erase button in the UI doesn't soft brick users HW. The reset function should operate as stock fw does...
  12. e38BimmerFN

    Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.1.17SF-HW

    Some but not much. Maybe 600Mpbs. Again, depends on device support and design.
  13. e38BimmerFN

    160Mhz in Bridge Mode on R7800?

    I don't have the R7800 set up for bridge mode anymore. Been using it as a host router with Entware installed. Max speeds will be near or on 900-1000Mpbs since the LAN ports are limited by 1000Mbps. The 1733MPbs is just the connection rate between the R7800s Wifi radio and a wifi source that...
  14. e38BimmerFN

    Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.1.17SF-HW

    Ya, all we can do is ask or request. Voxel is receptive to requests and if it's in his means and can take the time, he usually gets it done. Just have be patient. Voxel does great work for those NG products he likes working on. ;)
  15. e38BimmerFN

    Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.1.17SF-HW

    You'll not see much over 400-500Mpbs on the down on orbi. Your connection rate is already 866 which is max for a connection rate, this is only a connection rate. Actual speed thruput differs and will be slower based on device design and support there. I presume your wired speeds are to spec...
  16. e38BimmerFN

    Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.1.17SF-HW

    Yes, we hope that Voxel will correct his FW so that the reset button and ERASE button in the UI will work as expected so users can factory reset when needed. The factory reset should work like stock FW. Factory resets maybe needed when user configurations are not correct and is causing problems...
  17. e38BimmerFN

    Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.1.17SF-HW

    The erase feature on the UI is the same and pressing the reset button on the RBR when using stock FW.
  18. e38BimmerFN

    Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.1.17SF-HW

    And this only happens after SSID separation I take it?
  19. e38BimmerFN

    R7800 vulnerbilities using Voxel firmware

    Not sure if this is still relevant: https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-25sf-v-1-0-2-29sf.38032/#post-313549
  20. e38BimmerFN

    Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.1.17SF-HW

    Did you disable 20/40Mhz Coexistence on the RBRs UI for 2.4Ghz?
Top