Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. e38BimmerFN

    Orbi info for a newb?

    Beamforming should be enabled. MIMO and the rest can be to taste. If you don't have any MIMO supporting devices, you can disable this. Daisy Chain is for having two or more RBS set out in a line from the RBR to piggy back off each other. IF you don't have this configuration, disable Daisy Chain.
  2. e38BimmerFN

    Orbi info for a newb?

    Try it again...
  3. e38BimmerFN

    Orbi info for a newb?

    Also review this as well: https://community.netgear.com/t5/Orbi/ORBI-RBK50-RBS50-Tips-Tricks-Hidden-Secrets-etc/m-p/1745266/highlight/true#M60729 I recommend the Orbi with out separating the SSIDs. Orbi works very well with a signal SSID and PW. If you have problems of connecting 2.4Ghz only...
  4. e38BimmerFN

    Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.1.17SF-HW

    Great. I hear the user on mac host his recovered. Wheew. Hoping that Voxel can make the reset button work for Orbi. I guess users should revert back to stock FW first before resetting the RBR. At least until Voxel can get the reset button and process working as expected. o_O
  5. e38BimmerFN

    Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.1.17SF-HW

    Did you use the TFTP program that NG provides or the one built in to Windows?
  6. e38BimmerFN

    Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.1.17SF-HW

    What process have you been doing to correct the RBR after it's soft bricked? Are you using the TFTP process to get stock FW back on?
  7. e38BimmerFN

    Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.1.17SF-HW

    I see someone posted about this over in the NG forums as well. Posting this link here for additional information on there behalf: https://community.netgear.com/t5/Orbi/Keep-connecting-to-5GHz-network-despite-disabling-5GHz-SSID/m-p/1902117/highlight/true#M90227 Hopefully a Mac Version of TFTP...
  8. e38BimmerFN

    Custom firmware build for R7800 v. 1.0.2.76SF & v. 1.0.2.76.1SF

    What was the upgrade path when you updated to v75 or 76? Did you have voxels FW loaded before that? If so, what version had been loaded? Or did you have stock before you had loaded v75?
  9. e38BimmerFN

    Custom firmware build for R7800 v. 1.0.2.76SF & v. 1.0.2.76.1SF

    Ok, I have v74.4 loaded on mine with Entware. I haven't upgraded as of yet.
  10. e38BimmerFN

    R7800 Error: No space left on device - Trying to install Entware

    Thank you Voxel. I had planned on removing the USB Drive first from the router, then reverting back to stock FW, running some tests, then come back to your FW. Will give this a try and not reset anything.
  11. e38BimmerFN

    R7800 Error: No space left on device - Trying to install Entware

    Just a quick question, if I were to revert back to stock FW then at some point choose to come back to Voxels FW, what is the best method to backup or reconfigure the router for Entware after Voxels FW is reloaded? I presume if the USB drive is removed and stock FW is loaded, then later on...
  12. e38BimmerFN

    How to power down r7800 with usb/sata disks attached

    You can just turn OFF the R7800 at the power switch and then disconnect the attached USB Drive(s).
  13. e38BimmerFN

    Orbi AC3000 RBK53 suggestion

    What Firmware version is currently loaded? What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too? What is the size of your home? Sq Ft? What is the distance between the router and satellite(s)? 30 feet is recommended in between RBR and RBS to...
  14. e38BimmerFN

    [R7800] Will no longer save settings after reboot.

    Yes it maybe worth at least making contact with NG and letting them know. Point to this thread and any others that have this problem. You can talk about and beat around the bush about it here in the forums however it's not going to make any changes or any progression. Its worth making contact...
  15. e38BimmerFN

    [R7800] Will no longer save settings after reboot.

    Yep. There's still a R7000 at my work that I connect to. Runs great for wireless.
  16. e38BimmerFN

    Custom firmware build for R7800 v. 1.0.2.75.1SF & v. 1.0.2.75.2SF

    Changed. Thanks.
  17. e38BimmerFN

    Custom firmware build for R7800 v. 1.0.2.75.1SF & v. 1.0.2.75.2SF

    Do worry about doing the dropbear or back up. You can skip that. Do this first is what seemed to work best for me. Format the drive in Windows for NTFS. Then install or plug into USB port on router. Enable Telnet under 192.168.#.1/debug.htm. Run telnet program and log in. Run the following...
  18. e38BimmerFN

    [R7800] Will no longer save settings after reboot.

    Agree. After all due diligence, which you are tasked to do and prove. Troubleshooting and resets and testing with stock vs 3rd party FW to confirm the issues at hand. Then it would be something to hand over to NG for review. It would have to be reviewed by NG. Yes I've had my R7800 since...
  19. e38BimmerFN

    Voxel Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.1.13.1SF-HW

    Fast Roaming can be tested to your liking. Beam-forming should be enabled. MIMO is only really needed if you have MIMO supporting devices. Be aware that most wifi devices like phones, pads and cameras all pick and choose what frequency they connect to. 30 feet is recommended in between RBR...
  20. e38BimmerFN

    [R7800] Will no longer save settings after reboot.

    Time for a laptop fan cooler under your router. o_O
Top