Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. aex.perez

    Beta Asuswrt-Merlin 3004.388.6 Beta is now available

    Still on, I also notice that my regular upload/download speeds are affected as well. Usuallt in the 93xMB up and down, now 40xMB down and 72xMB up. Went into all the QoS rules and made sure everything is disabled or otherwise cleared out. QoS is off. Still see Bandwidth Monitor and Data...
  2. aex.perez

    Beta Asuswrt-Merlin 3004.388.6 Beta is now available

    Just applied the beta to my AX88u, somehow upon reboot it enabled QoS on its own. Even turning it off and hitting Apply, I could still pull stats out of Bandwidth Monitor and Data Classification and as much as I try to diabled it it won't disable, even enabling QoS and disabling it. Also...
  3. aex.perez

    [ 3004.388.6 alpha Build(s) ] Testing available build(s)

    One positive, overall the wireless drivers in this release have for me been the most stable especially from a roaming perspective than just about any prior release. That said I've pretty much optimized everything between the router and both nodes (AiMesh) in that I had minimized a just to a...
  4. aex.perez

    [ 3004.388.6 alpha Build(s) ] Testing available build(s)

    The temporary workaround seemed to do the trick, after hitting the apply the second time Bandwidth Monitor shut down and nothing under Data Classification except "Note: Statistics require Traditional QoS mode or the TrendMicro bwdpi engine to be enabled." as it should (note all QoS and App...
  5. aex.perez

    [ 3004.388.6 alpha Build(s) ] Testing available build(s)

    Spoke too soon.. Happened a couple of times today, no crash but the Bandwidth Monitor and Data Classification started up with the BWDPI Engine Dec 27 15:24:00 Router kernel: Init chrdev /dev/idp with major 190 Dec 27 15:24:00 Router kernel: tdts: tcp_conn_max = 8000 Dec 27 15:24:00 Router...
  6. aex.perez

    [ 3004.388.6 alpha Build(s) ] Testing available build(s)

    Loaded up the alphas on the AX88 and both AX86 mesh nodes, this morning other than changing from Let's Encrypt to Auto and back again for the cert to refresh its been solid so far
  7. aex.perez

    Release Asuswrt-Merlin 3004.388.5 is now available

    Had that issue as well, though since upgrading YazDHCP to v1.06, dnsmasq fatal signal 11 error have gone quiet.
  8. aex.perez

    Release Asuswrt-Merlin 3004.388.5 is now available

    This release is even more rock solid than either of the Alpha's or the Beta releases which were all pretty rock solid to start with. Either that or I haven't any interference since applying the final, and the logs are for the most part clean, just the usual noise since rebooting after applying...
  9. aex.perez

    Release Asuswrt-Merlin 3004.388.5 is now available

    All done!, Just an observation; AX86 Nodes first, then Ax88 router. Router applied settings then flashed the firmware, faster than the nodes just applying the firmware Node flash took noticibly longer, felt 2x longer but didn't actually time it. Everything came up clean, everything connected...
  10. aex.perez

    Beta Asuswrt-Merlin 3004.388.5-beta is now available

    not so simple, long history, lots of dependencies - many more than I can list but here's one - https://www.snbforums.com/threads/merlinwrt-compile-instructions.47984/page-5#post-677478
  11. aex.perez

    Beta Asuswrt-Merlin 3004.388.5-beta is now available

    Surprise to me and good to know, but I still never figured out why it why the bwdpi engine would randomly start (388.x only, didn't do it under 386.x) and apply whatever was set under http://www.asusrouter.com/Advanced_QOSUserPrio_Content.asp cutting my bandwidth in half. I understand why, based...
  12. aex.perez

    Beta Asuswrt-Merlin 3004.388.5-beta is now available

    At least for me, the bwdpi engine (with both ASUSWRT or Merlin - both 388.x) upon a reboot will work for a few minutes or randomly if there is anything set in either http://www.asusrouter.com/Advanced_QOSUserPrio_Content.asp or http://www.asusrouter.com/Advanced_QOSUserRules_Content.asp (exposed...
  13. aex.perez

    Beta Asuswrt-Merlin 3004.388.5-beta is now available

    Had the BWDPI engine start back up for a for minutes like in the Alpha. During that time I was able to go to the Bandwidth Monitor and Data Classification page and see statististics like in the Alpha. After a few minutes post firmware update / reboot the BWDPI engine shut down and going back to...
  14. aex.perez

    [ 3004.388.5 alpha Build(s) ] Testing available build(s)

    It was rhetorical to some extent since I don't know if it is normal and why it works sometimes and not others, but I do know its dependent on bwdpi being enabled by whatever is triggering it. When bwdpi is enabled it works when its off it doesn't but what is starting and stopping it I don't...
  15. aex.perez

    [ 3004.388.5 alpha Build(s) ] Testing available build(s)

    So digging around just now I found when the I think I found when BWDPI engine started but not why... Master@Router:/tmp/bwdpi# cat dcd.stat ***** data_colld statistics ************************************ start_time : 1700108152 (2023-11-15 23:15:52) By the way this happens to be at...
  16. aex.perez

    [ 3004.388.5 alpha Build(s) ] Testing available build(s)

    Nope, no scripts after this happened. Also because of that, I did a full reset and went back on stock ASUSWRT firmware too and it happened the exact same way during the last time. Any other ideas? Edited: Based on those "hidden items"...
  17. aex.perez

    [ 3004.388.5 alpha Build(s) ] Testing available build(s)

    The mystery gets deeper. Going to the system log to look for this, as I've seen this prior with my previous QoS issue (that one of your previous posts on a similar topic, helped me to resolve) nothing in the log. So I tried to repeat it to see if for some reason I may have missed it scrolling...
  18. aex.perez

    [ 3004.388.5 alpha Build(s) ] Testing available build(s)

    But initially it works even if QoS and TrendMicro is off, if only for a few seconds. When it stops go back to Bandwidth monitor, wait a seconds for it to populate then go to the Classificatons tab where its populated for 3 seconds (default in GUI), until it expires and cleared in the GUI...
  19. aex.perez

    [ 3004.388.5 alpha Build(s) ] Testing available build(s)

    Latest, 3004.388.5_alpha1-gea1e2fbf24 only looked at this because of what was in the items in the change log with the latest Alpha... (Updated signature for clarity) CHANGED: Display tracked connections on the QoS/Classification page even if QoS isn't set to Adaptive QoS. FIXED...
  20. aex.perez

    [ 3004.388.5 alpha Build(s) ] Testing available build(s)

    Not sure if this is correct but under QoS - WAN/LAN Bandwidth Monitor, even though I have Apps analysis set to off, yet after a few seconds on that page, I start seeing values Once I do I then I jump over to the classification tab I see a bunch of entries for a few seconds, and the they...
Top