Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. bluzfanmr1

    power saving mode?

    And now this one... https://www.snbforums.com/threads/wiping-a-hard-drive-vs-buying-a-hard-drive.79441/#post-770735/
  2. bluzfanmr1

    Huge Increase In Firewall Drops

    I was going to say that it is putting somewhat of a load on the router and it's noticeable to me, especially when trying to follow the System Log page. I had to remove scribe, which made things better but messy, then being overloaded with drops.
  3. bluzfanmr1

    Huge Increase In Firewall Drops

    I did notice that these were all Comcast IP's and, since I live in a condo complex with a very crowded environment, wondered if it could possibly be a nefarious neighbor or someone's infected device. I think I'll report this to Comcast and see what happens. Thanks for the reply.
  4. bluzfanmr1

    Huge Increase In Firewall Drops

    Thanks for the confirmation, appreciate it.
  5. bluzfanmr1

    Huge Increase In Firewall Drops

    Recently, after having the same Comcast WAN IP for about 2.5 years, my IP changed to a new one. Since then, the number of firewall drops has increased massively to the point of 3-5 attempts, every 3-5 seconds. It used to be I would get a few drops every minute or two. There are only a few...
  6. bluzfanmr1

    Entware Easter update

    I had to restart scribe to get the firewall logging to show again.
  7. bluzfanmr1

    Which CDNs support edns-client-subnet?

    Yeah we just got a little sprinkle with some hail mixed in. Lasted about 2 minutes.
  8. bluzfanmr1

    Which CDNs support edns-client-subnet?

    @Paliv Hi neighbor, I'm in Santa Fe with Comcast. Where are you located?
  9. bluzfanmr1

    Release Asuswrt-Merlin 386.5 is now available

    RT-AC66U_B1 dirty upgrade from 386.4 to 386.5 and everything is rock solid here.
  10. bluzfanmr1

    Firmware wrong sha

    In Terminal on the Mac, change the directory to where you downloaded the file. Then copy and paste the following: echo "10da310c6ba586213cc15816e55adb3d3fae282aaa3ae02e4e4d20394e9329de RT-AX88U_386.4_0_cferom_ubi.w" | shasum -a 256 --check It matches for me: RT-AX88U_386.4_0_cferom_ubi.w: OK
  11. bluzfanmr1

    Diversion Diversion - the Router Ad-Blocker v4.2.x (see new thread for 4.3.x)

    I believe you have to close out the browser first and when you restart it, it should be fine.
  12. bluzfanmr1

    vnStat [Release] vnStat-on-Merlin - UI, CLI and email - data use and data limit monitoring - R1 and R2

    Thanks Jack, that worked!
  13. bluzfanmr1

    vnStat [Release] vnStat-on-Merlin - UI, CLI and email - data use and data limit monitoring - R1 and R2

    Yesterday after the numerous Entware updates were installed, my stats stopped updating. I forced an update which didn't help but it did generate the following: vnstati: error while loading shared libraries: libwebpdecoder.so.4.1.1: cannot open shared object file: No such file or directory Did...
  14. bluzfanmr1

    AC68U: Internet using WiFi can't hit 400mbps. Is this CPU limited?

    What cable modem brand and model are you using? Is it your own or is it from Xfinity? If it's your own and it only supports DOCSIS 3.0, that may be the issue. I would think at your new speed you will need a DOCSIS 3.1 cable modem.
  15. bluzfanmr1

    Connect router to wifi hotspot

    Have you considered buying your own cable modem and putting it in bridge mode? This eliminates the Comcast monthly modem fee.
  16. bluzfanmr1

    vnStat [Release] vnStat-on-Merlin - UI, CLI and email - data use and data limit monitoring - R1 and R2

    Multiple reboots didn't work for me either so I uninstalled the Unbound stats gui and rebooted and the vnstat tab was back. Then I reinstalled the Unbound stats gui and both are now there. I haven't rebooted again as I suspect the vnstat tab will disappear again.
  17. bluzfanmr1

    vnStat [Release] vnStat-on-Merlin - UI, CLI and email - data use and data limit monitoring - R1 and R2

    Is it possible to merge into the current database a couple of previously exported databases I saved as I was doing a default reset to the router? I ended up not importing them at the time. I've read about --savemerged but haven't been able to find any examples, though I'm not sure that is the...
  18. bluzfanmr1

    vnStat [Release] vnStat-on-Merlin - UI, CLI and email - data use and data limit monitoring - R1 and R2

    I rebooted for the first time since the last hotfixes and now the gui add-ons tab for Vnstat has disappeared and nothing I try brings it back. That being said, if I just type in the address, http://x.x.x.x/user3.asp, the page shows up. It's as if there's a broken link. Is it my setup or is...
  19. bluzfanmr1

    Unbound unbound_manager (Manager/Installer utility for unbound - Recursive DNS Server) - General questions / discussion thread 2

    I had the same issue. Try a reboot if you haven't. That worked for me.
  20. bluzfanmr1

    system log entries Asus AC86U

    Skynet will roll up those entries into a one line summary at the top of each hour. It is part of the stats piece of Skynet.
Top