Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. M

    Debating: Because of problems with AX68U, keep using AC86U?

    Unfortunately I have PPPoE disconnecting issues and random rebooting issues from ac68u ac86u ax86u, all of them are running 386.3_2. I believe it's not hardware issue rather than recent software bugs, I had ac68u which was running before 384.x could last for 1 year without reboot and...
  2. M

    Found a strange behavior of script running with crontab cru on ac86u and ax86u 386.3_2

    I did another experiment, abstracting log from cru cru a RdpIPv6Daemon "*/1 * * * * /opt/etc/rdp-ipv6-mapping.sh >>/tmp/RdpIPv6Daemon.log 2>&1" I made some changes in psCHK(). function psCHK() { printf "\nEntering $1\n" local PS_CMD PS_LIST CMD_STR CMD_STR=$1 ps aux...
  3. M

    Found a strange behavior of script running with crontab cru on ac86u and ax86u 386.3_2

    Model ac86u ax86u 386.3_2 I'm trying to run a IPv6 to IPv4 port forwarding script, but I'm running into problems that related to crontab. cru a RdpIPv6Daemon "*/1 * * * * /jffs/scripts/rdp-ipv6-mapping.sh" When the script is run for the 1st time it producing these logs, because iptables rule...
  4. M

    services-start failing to start

    Have you tried to do a factory reset then try again? What about other scripts, such as wan-event? Did you try `chmod +x /jffs/scripts/services-start`
  5. M

    IPv6 Native vs Passthrough (2-Router LAN)

    ac86u 386.3_2 IPv6 pass through Firewall on You can ping6 to all inner LAN devices from outside WAN, but can not access any inner LAN devices' port, except you have specifically added a forward rule such as `ip6table -I FORWARD -s x:x:x:x:x:: -j ACCEPT`. So leaving firewall on, pass through...
  6. M

    AC86U 386_1 suddenly rebooted itself - does 386.1_2 fixing it? Just happened today

    I have the same problem, ac68u ac86u ax86u all have random reboot issues. Range from minutes to days, 386.3_2 There is nothing specious in the log, private data has been censored. From Oct 22 05:58:08 to Oct 22 06:15:36 there is a 20 minutes blank , doesn't seem to be due to a power failure...
  7. M

    RT-AC68u pppoe issues

    I think I have the same problem, or even worse, PPPoE stuck at random times after power on from few hours to 30 days, has to be rebooted manually, also the router reboots itself randomly. I have two ac68u, one r7000, two ac86u and one ax86u, all of them are running merlinwrt 386.3_2 now. I...
  8. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    Add route table also need to your laptop. route -p ADD 192.168.0.0 MASK 255.255.255.0 10.10.10.1 route -p ADD 192.168.2.0 MASK 255.255.255.0 10.10.10.11 Yes pretty easy. opkg remove zerotier opkg install http://bin.entware.net/armv7sf-k2.6/archive/zerotier_1.4.6-5_armv7-2.6.ipk Yes...
  9. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    There is one thing I would like you to confirm, what version of Zerotier you are using on your ac68u? As what I have known, the Zerotier v1.6.x on ac68u is still broken, you have to fallback to v1.4.6. I saw you were missing 9399 tcp port, you might need that as well. And one more thing, if...
  10. M

    Solved Cannot add node into AiMesh

    Based on 386.3_2 From my experience, the following way of configuration will always fail. Condition 1. ac86u or ax86u as the top router Condition 2. ac68u as Aimesh node ac68u 1. From page Administration - Operation Mode 2. Switch to AiMesh Node from fully configured Wireless router...
  11. M

    USB Application Accounts messed up RT-AC86U

    Thank you very much @ColinTaylor for your advice. I did this, and my USB Application(Samba) users finally got back into order. Massed-up has been fully restored. nvram set acc_num="3" nvram set...
  12. M

    USB Application Accounts messed up RT-AC86U

    I can confirm that it matches. nvram get http_passwd yields r6pKvNcKzSyzqUqqEU3n7tFJIhs1AAU2Q9SpNPp9sDg= I have noticed that too, so I can confirm that there is no typo or something. nvram get acc_list yields <user1>...==<router>...=<nas>...= nvram get acc_webdavproxy yields admin>0<user1>0...
  13. M

    USB Application Accounts messed up RT-AC86U

    Same here. AC86U, from 387.17, 384.18 to 384.19, I saw this problem since 384.18 I think. The following hash has been scrambled. I have two nas accounts, I think one of them is system default. user1 is missing from \etc\passwd completely. # nvram get acc_num 3 # nvram get acc_list...
  14. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    Apparently, you need to create those scripts before using them. Did you see the scripts below step 14, **All scripts ** part.
  15. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    I haven't tested yet, please follow this guide: https://zerotier.atlassian.net/wiki/spaces/SD/pages/7110693/Overriding+Default+Route+Full+Tunnel+Mode ----------------------------------- By the way, if you have IPv6, that would be globally reachable, maybe Plan A is still feasible. Here is a...
  16. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    I see. Currently, Plan A(Direct access to your public WAN IP) would not work with your ISP configuration. So let's put Plan A aside. Plan B should be working for you, and zerotier alone should be enough. Let's forget about the shadowsocks and stick to the zerotier. Just reroute default...
  17. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    Can you ping your home router from outside?
  18. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    I didn't see the problem with your home server side. It should work. As long as your server-side is not behind cell-network(if you can ping your router), ss-server should be reachable. There is a third plan, run both ss-server and zerotier on a VPS, add an ip route on the VPS which points to...
  19. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    It will work behind double NAT, BUT will not work if your router is behind cell network. Shadowssocks Plan ------------------------------------------------------------------ 1. For example, this is my settings, it works perfectly, my test router is ac68u and it's behind ac86u...
  20. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    What client were you using? On the client-side with shadowsocks client, zerotier is not needed anymore, all zerotier traffic will go through your ss-server. To me for Quantumult on iOS. 1. SSH to your router, make sure your ss-server is running by $ /opt/etc/init.d/S22shadowsocks-server status...
Top