Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    Actually it does. **Based on Merlin 384.14_0 Firmware kernel 2.6.36.4 , but should be working on any router that supports Entware.** 1. Entware installation. $ entware-setup.sh 2. Then install ss-server using Entware: $ opkg update $ opkg list shadowsocks* $ opkg install...
  2. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    OpenVPN is blocked by some hotels, PPTP is obsolete. OpenVPN is also hard to configure. None of them supports advanced net filters and custom route decisions. Shadowsocks based clients support all those features. Also it is very hard to be censored or blocked. That's what I was talking about...
  3. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    You're welcome. I linked all my home computers into a VPN, I can access them from anywhere. Also installed on my VPSs and SSH them only through zerotier. It's especially handy for accessing maintenance WebUI in all kind of services. For that kind of usages, I recommend checking out...
  4. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    Scroll down to the page https://my.zerotier.com/network/<your network id> You will see a title bar like this: Auth? Address Name/Description Managed IPs Last Seen Version Physical IP Under the AUTH? tag, there is a checkbox, check it to enable your node. You need to execute 'zerotier-cli join...
  5. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    1. Asuswrt Dual WAN is causing a lot of problems. 2. Use this to check your route tables, make sure your packets entering and exiting through the same gateway. `ip route` 3. If you really want to use the second WAN, I recommend that you manually configure route table for specific ip range to...
  6. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    You may try to turn off the Firewall in WebGUI and see what will happen to the INPUT filter. @ 3 just filters bad and invalid packets, you'd better put zt+ after that, so as to not flood the system with junk data. You may give it a try by youself, just put zt+ either after @ 3 or after @11, run...
  7. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    Has nothing to do with ZeroTier, you may ignore `$ iptables -I INPUT 1 -i ppp0 -p icmp -j DROP`. In your case, ACCEPT all data from zerotier should be put above the `DROP all ` This `$ iptables -I INPUT -i zt+ -j ACCEPT` would work. As long as your zt+ are private networks(not the earth...
  8. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    Try this, 10.9.8.0/24 is my zerotier network, 192.168.9.1 is my router LAN address. The rule says that packets coming from 10.9.8.0/24 network and exiting via br0 will get the source ip-address set to 192.168.9.1. iptables -t nat -A POSTROUTING -o br0 -s 10.9.8.0/24 -j SNAT --to-source...
  9. M

    WARNING: Curl silently ignores the specified proxy

    Please Please, add some warring to curl, if proxy is using. I wasted several hours trying to figure it out why my proxy didn't get any data. I install an entware version of curl finally everything works. I used to use curl test everything, this was a big surprise to me, because the tools I...
  10. M

    A Guide About Installing ZeroTier on ASUS AC68U Router

    ** Based on Merlin 380.68_4 Firmware, but should be working on any router that supports Entware.(also tested on 386.3_2) ** Added:19/11/26, all "zt0, zt1, ztzlgf7vul" can be replaced by zt+ for wild matching in iptables only! 1. Entware installation. `$ entware-setup.sh` 2. Then install...
  11. M

    Notifications (E-Mail)

    I'm glad it worked!
  12. M

    Notifications (E-Mail)

    Hey, I have updated my post, please check it out. How to acquire certificate is at the bottom, same as the original wiki.
  13. M

    Notifications (E-Mail)

    First, save your scripts by WinSCP. Save your setting by any necessary means. Second, you need to reset everything by doing factory reset, and setup everything for scratch. And format the jffs. Third, restore scripts from your backup, check for...
  14. M

    Notifications (E-Mail)

    For the 2-factor enabled Google account, you just need to search for "GMAIL APP PASSWORD". Generate a new App password for your Gmail and use it as your sendmail login password.
  15. M

    Notifications (E-Mail)

    Hey, here is a new script which supports Bcc and multiple email addresses based on the original wiki here. I'm using this script now, sending my new IP address to my friends. I think someone may need this, so I post it here. Save it as: /jffs/scripts/wan-start set as being executable: chmod...
  16. M

    [Release] Asuswrt-Merlin 380.66 is now available

    Well, you really should do a factory reset, it will fix once and for all, since you don't customize much, it won't cost much too. I updated from 380.65, I had none issue for months and never had to power cycle the router. After update to 380.66_x I though it would be fine without factory...
  17. M

    [Release] Asuswrt-Merlin 380.66 is now available

    Have you tried Naftali Oziel's suggestion? Reset NRAMs settings and re-setup from scratch? Mine ac68u had similar sudden death and weird behaviors. It's OK now, after factory reset.
  18. M

    [Release] Asuswrt-Merlin 380.66 is now available

    Thank you for mentioning that. I didn't notice the changes. I really appreciate your help. And I will do a test, and report back llater.
  19. M

    Notifications (E-Mail)

    There is a minor issue about time sync in the script, after each ntpclient, my timezone is set back to zero for a brief time, actually my timezone is UTC+9. $ntpclient -h pool.ntp.org -s &> /dev/null May 31 01:30:42 miniupnpd[853]: Listening for NAT-PMP PCP traffic on port 5351 May 30...
  20. M

    Notifications (E-Mail)

    I solved. Go to WebUI->Administration - Restore/Save/Upload Setting do restore <Factory default>, then do <Format JFFS partition at next boot>, and setup everything from scratch. Setup the wan-start script, make it executable, download certification for gmail. That's it, all set. I can get...
Top