Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. G

    Skynet "Elvis has left the building ... "

    Oh dear. Does that mean we can only turn on Skynet at weekends now? Or is it weekdays? :)
  2. G

    amcfwm - AsusWRT-Merlin Custom Firmware Manager

    They have. Pity it was one of the main third party developers and contributors. EDIT: sorry but I've only found out today that Adam left when I saw Skynet's update on amtm and came to the addons forum for news. I'm frankly shocked that you would let someone developing such a popular addon go...
  3. G

    Skynet "Elvis has left the building ... "

    Really sad to hear that our southern star is no longer shining on the forum. I hope he changes his mind, though I agree that the decision to close six months old threads is too taxing on third party developers. IMO there should have been a solution with official addons and fork threads being...
  4. G

    Android phones can't connect to access point

    Do you run the same SSIDs on the AC66U and do the phones work on them? If you assign an IP manually to a phone can't you even ping it from a PC wired to the AC68P LAN1? A few things I would change on the script: remove the lines with IP addresses as they aren't needed in AP mode, you only need...
  5. G

    VLAN Help with Asus Merlin - pfSense & Managed Switch

    You are welcome, I'm glad it worked. Let us know if you get any problems.
  6. G

    Turning Off WiFi on RT-AC87U

    Setting 'Enable Radio' to No on the professional tab is definitely the right way to turn the wifi off, it works fine on my RT-AC87U and RT-AC68U, if it doesn't on yours it may be time for a factory reset of the router. Maybe try to toggle another setting on the same page (like enable wireless...
  7. G

    VLAN Help with Asus Merlin - pfSense & Managed Switch

    You just need one cable from the switch to the AC68U like you have currently. Your script has some problems, try to replace it with the one below (note it uses the WAN port on the AC68U instead of LAN1). #!/bin/sh robocfg vlan 21 ports "0t 5t" vconfig add eth0 21 ifconfig vlan21 up brctl...
  8. G

    Skynet Skynet - Router Firewall & Security Enhancements

    Hi Adam, I've noticed a problem with the logs, multiple events are being logged on just one line with the date and time missing on all but the first event, see below. Sep 18 21:06:36 r1 kernel: [BLOCKED - INBOUND] IN=ppp0 OUT= MAC= SRC=178.128.154.242 DST=x.x.x.x LEN=40 TOS=0x00 PREC=0x00...
  9. G

    Is there a script for configuring VLANs?

    There's a valid reason why people point to older posts or don't reply at all to the requests for help with VLANs and it's that doing this on Asus/Merlin routers isn't recommended if one doesn't have a good grasp on VLANs and iptables, which can't be learned just by reading a post or even a guide...
  10. G

    WiFi Vlan on AC3100

    Looks good. Yes now you have to configure the firewall rules on the opnsense to allow the new vlans limited access.
  11. G

    WiFi Vlan on AC3100

    Yeah eth1 and eth2 are the non guest wifi interfaces, as I wrote earlier it's best to leave these as default on vlan 1 else other things may break. If you still want to try to get it working this way you'll also have to change the brctl lines to bridge those interfaces with the new vlan instead...
  12. G

    WiFi Vlan on AC3100

    You have to turn on the guest networks on the webGUI else the wlx.x interfaces aren't created, of course first you need to be able to access the webUI so follow what I wrote on my last post. As I wrote earlier wl0.0 and wl1.0 don't exist at all. EDIT: I'm going out now, try my suggestions and...
  13. G

    WiFi Vlan on AC3100

    Remove the script and reboot the AC3100 and see if you're able to access the webUI. Put back your tomato router to have a wifi network back, then start from scratch. I'd reset the AC3100 to factory settings, put it in AP mode, then do the webUI side configuration and finally add the script...
  14. G

    WiFi Vlan on AC3100

    You should still be able to access the webUI in AP mode, just like you can access the CLI. The script is run at boot, have you rebooted the AC3100 to confirm if it's run? If it still isn't you may not have made it executable, just run on the CLI: chmod a+rx /jffs/scripts/* Or you may have...
  15. G

    WiFi Vlan on AC3100

    For you main LAN+WLAN you don't need any vlan or other configuration, we leave it as default. On the opnsense use the parent interface for it, eg. without any vlan. You only need vlans for your IOT and guest networks so they are kept separated from your main LAN+WLAN. Interfaces wl0.0, wl1.0...
  16. G

    WiFi Vlan on AC3100

    The tagging only happens on the physical link between the opnsense box and the AC3100 WAN port and the one between the AC3100's CPU and its built-in switch. It's needed as you're carrying multiple vlans over one physical link, without tagging the devices couldn't know which vlan the traffic...
  17. G

    WiFi Vlan on AC3100

    Have you set your AC3100 to AP mode? As that changes how the ports have to be configured. If you aren't familiar with this configuration and you have an opnsense firewall, go with AP mode. In AP mode the ports that you have to assign to the new vlan/s with robocfg are the WAN port (connecting...
  18. G

    Asus rt-ac56u: Last Merlin firmware 2 years ago, time to replace?

    John's fork provides maintenance for documented security issues so security vulnerabilities are being taken care of. The last update was on 12-July-2020. Additional Information The fork does include Maintenance for documented security issues Maintenance for supporting open source components...
  19. G

    wanted: vlan for AC56U in AP-Mode

    That's great, glad it helped.
  20. G

    wanted: vlan for AC56U in AP-Mode

    Yes, you create another script called init-start, also in /jffs/scripts/, with the below content, per your latest config: #!/bin/sh robocfg vlan 1 ports "0 1 2 4 5t" robocfg vlan 201 ports "4t 5t" robocfg vlan 202 ports "3 4t 5t" And you remove the same lines from the services-start script.
Top