Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. L

    Release Asuswrt-Merlin 386.12 is now available for AC models

    Thanks for the hint, something quite interesting. I need to monitor that during my next home office day and see if either changing the USB configuration does help or if there is a difference between the 2.4 GHz and the 5 GHz connection (even if the 5 Ghz signal in that room is rather weak)...
  2. L

    Release Asuswrt-Merlin 386.12 is now available for AC models

    No not really, but I could maybe switch the USB configuration to 2.0. But if it was the USB, then I guess the issue should be present in every firmware, unless something was changed in the USB driver. Now with switching back to 386_12.2, my issues are gone. The VPN server seems to be running...
  3. L

    Release Asuswrt-Merlin 386.12 is now available for AC models

    I fully understand that, but still I had this issue all the time with 386_12.0 that my work laptop connected on 2.4 Ghz had a very bad internet connection while the other computers at home did work as they should be. After turning off TM engine, it did work again without any issues on 386_12.0...
  4. L

    Release Asuswrt-Merlin 386.12 is now available for AC models

    So in addition to the above, it seems I am having again the issue that my wireless speeds are incredibly slow as long as TM is turned on. Also again dcd keeps crashing, as well as asd... Turning off TM again now and monitoring if this helps, probably I need to revert back to 386.12_2, which was...
  5. L

    Release Asuswrt-Merlin 386.12 is now available for AC models

    On my AC88U I never did experience the wifi issues that others had, it was running stable (as far as I know) with 386.12_0 and 12_2. After updating to 386.12_2 the router had 2 crashes of the vpn server, but after these 2 it was more or less ok, as far as I know. Now with the update to 386.12_4...
  6. L

    Release Asuswrt-Merlin 386.12 is now available for AC models

    Since 386.12 or maybe even 386.11 my AC-88U had similar issues, where the router would become unresponsive and I could not log into the web ui while at the same time, all the wireless clients and the open vpn clients also had low (to none) performance. After a reboot, the system would work fine...
  7. L

    Release Asuswrt-Merlin 386.12 is now available for AC models

    so I have the firmware now running for ~22h, but did reboot 6 hours ago. after installation I started QoS and ~1 hour later asd crashed. after the reboot, I used the router for some time and got upset with the low speed of my 2.4 Ghz connection and/or internet connection and did withdraw from...
  8. L

    Release Asuswrt-Merlin 386.12 is now available for AC models

    Installed the updated testing firmware yesterday and had the AC88U now run on it until noon. The dcd process did not crash anymore, but asd did crash immediately after enabling the TrendMicro things again. Furthermore, the whole system is getting terribly slow for wifi clients when QoS /...
  9. L

    Release Asuswrt-Merlin 386.12 is now available for AC models

    installed the testing firmware on my AC88U today and tried it now for 2 hours, the process is still crashing approximately every 2 minutes, while in between I had also 20 minutes where it did not crash
  10. L

    RT-ACC88U & Disconnects / Packet Loss

    Hi Everybody, on my home network I have now since 3 years an AC88U with RMerlin firmware (now 386.5_2), but since some time it is driving me crazy. It seems like after a certain time without being reset, the router starts to drop packets from my computer, at least this is what I wittness when...
  11. L

    AC88U USB Issue

    NVRAM is a bit more then 50% and as far as I remember has always been in that region, never really more. The swap is mainly there because Skynet does require it, but actually I do not need it at all being used according to the router statistics. Maybe I was really unlucky with bad quality usb...
  12. L

    AC88U USB Issue

    The strange is that I had it 3 times now and all the times a reset and new setup of the USB stick did bring everything back to normal life. When I tested the whole thing now everything got corrupted after I created the swap partition on the USB stick, as soon as I unplugged the stick everything...
  13. L

    AC88U USB Issue

    Thank you for the fast reply, a great help! If it is really "only" the usb-stick then at least I do not need to search on specific router settings or other issues anymore. I am still a little bit reluctant to buy an external drive for the 3-4 GB of space needed here, probably need to check if...
  14. L

    AC88U USB Issue

    What is the big difference there, less heat impact?
  15. L

    AC88U USB Issue

    Hi Everybody, I have an Asus AC88U where I now run Merlin 386.4 and usually also most of the available scripts installed via amtm. Now I had it for the 3rd time that the routers behavior got quite odd and all the time it seems to be the usb stick, where the stick seems was damaged and I had to...
  16. L

    Unbound Entware+386.3

    after playing a bit and searching through various threads it seems that something in the entware packages is broken and there are segmentation faults. When I try to updated entware the following happens: and probably because of that, I am not able to re-install unbound again. anyone has an...
  17. L

    Unbound Entware+386.3

    I just found this thread and I have similar issues with unbound on an AC88U with 386.3. I do not know if Entware was updated, however unbound was not running anymore for the last week. I tried to update it, and afterwards (as suggested above) uninstalled it completely and tried to reinstall. In...
  18. L

    amtm menuTree Issues with unbound / YazFi / FlexQoS

    This issue is only there fore the "Help & Support" tab, all others are working as they should and do open within the main window. But if really noone uses Firefox then please leave it as it is.
  19. L

    amtm menuTree Issues with unbound / YazFi / FlexQoS

    Firefox, but this issue is already there since 4-6 months...
  20. L

    amtm menuTree Issues with unbound / YazFi / FlexQoS

    So I did now some additional checks with FlexQoS development branch and it seems to be working now. Even after I went back to the stable branch of FlexQoS and then tried to reproduce the issue, I could not. Here the menuTree allocations, if it will help: https://pastebin.com/bFzAfrd4 Another...
Top