Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. SignedAdam

    GT-AX11000 WiFi 6E Capable

    The old saying goes : if you've got nothing nice to say, say nothing at all, guess some have no manners... I own this equipment, I'm allowed to request that the feature gets enabled on hardware that can support it. I shouldn't have to sell it and buy something else when the current hardware can...
  2. SignedAdam

    GT-AX11000 WiFi 6E Capable

    Still at the price point this product was selling at.. it should be looked in to... It felt like less than a few months WiFi 6 was replaced with WiFi 6E and if this device can support 6E it should be given. Asus could even add an experimental option, if a product is sold with the switch off...
  3. SignedAdam

    GT-AX11000 WiFi 6E Capable

    Other products have been released with certification, as you have mentioned the GT-AXE11000 has certificate. That will be it's selling point. Not all devices need certification, there are products out in the wild that wasn't WiFi 6 certificated, because they were released before WiFi 6 was...
  4. SignedAdam

    GT-AX11000 WiFi 6E Capable

    The GT-AX11000 WiFi chipset can support WiFi 6E according to broadcoms specifications : https://www.broadcom.com/products/wireless/wireless-lan-infrastructure/bcm43684 (Photo attached) So please could we see a firmware update to this device
  5. SignedAdam

    Beta ASUSWRT 386 RC3-2 public beta

    @everyone could we please try and stay on topic, it's very frustrating having having to scroll through all of this... All I wanted to do was find out what problems people were having and see if they were the same as mine, god knows what it's like for a firmware engineer over at Asus.
  6. SignedAdam

    Modem Bridge with AX11000 Advice

    My ONT is what I've replaced with a Dm200 currently, it take a normal line in from the copper outside, with a green cabinet which I assume has fiber going to it down the road? I'm looking to replace the Dm200 with one of the above so far I'm leaning to the ZyXEL from what everyone is saying...
  7. SignedAdam

    Modem Bridge with AX11000 Advice

    I stand corrected, thank you for the additional information
  8. SignedAdam

    Modem Bridge with AX11000 Advice

    Unfortunately most areas in the UK have only FTTC here ( fibre to the cabinet) I don't have access to FTTH ( fibre to the home) which I assume is cable
  9. SignedAdam

    Modem Bridge with AX11000 Advice

    My ISP BT can go take jump if they think I'm going to use their equipment... Home hubs are a Nationwide problem in my eyes, it really comes down to hardware and which is better, software wise Asus wins
  10. SignedAdam

    Modem Bridge with AX11000 Advice

    Sorry I don't follow? This is a vdsl2 line, I haven't heard of anyone converting a line from a RJ45 to a cat5 and it working
  11. SignedAdam

    Modem Bridge with AX11000 Advice

    My ISP is BT FTTC VDSL2 I want to see the states and all that, right now I'm using a Dm200 by NETGEAR but its interface is so slow and has hardly any information when in modem only mode, so looking at one of the two above
  12. SignedAdam

    Modem Bridge with AX11000 Advice

    Looking to buy a modem I can Bridge with my AX11000, so far I've come across two that have catched my eye ASUS DSL N16 https://deviwiki.com/wiki/ASUS_DSL-N16 & or ZyXEL VMG1312 https://deviwiki.com/wiki/ZyXEL_VMG1312-B10A Obviously I love flashing open source firmware on my stuff however I...
  13. SignedAdam

    AiMesh shows offline in GUI, but it's actually connected

    This is why we should have a reset to default in the web GUI of the node, so annoying when these things go ghost
  14. SignedAdam

    Beta ASUSWRT 386 RC2 public beta with full functions AiMesh 2.0 (continued)

    I agree with @sanke1 pretty silly having an older security protocols enabled with the new security protocols, having them both enabled brings all the ricks of the older protocol, I understand for compatibility reasons the older protocol might need to stay enabled. However for users who know all...
  15. SignedAdam

    AiMesh Node going OFFLINE after a few weeks

    Powerlines (the equipment that allows you to sent a ethernet signal through your house plug sockets) some of them have a power saving functionality, where if they aren't used, the powerlines switch off, if it's tp-link you have to download a program in order to change the options, some even...
  16. SignedAdam

    AiMesh Node going OFFLINE after a few weeks

    I'm happy to report since aimesh 2.0 I've had no nodes going zombie, I'm still using the power lines in my setup between the main node (gt-ax11000) and the node (rt-ac86u) using the same firmware as mentioned before, (3.0.0.4.386 on both models) no issues to speak of I'm very happy with the...
  17. SignedAdam

    AiMesh Node going OFFLINE after a few weeks

    I can confirm it is indeed built in to windows 10 powershell. Nice find @OzarkEdge you can also download openssh for windows 8.1 and integrate it using https://github.com/PowerShell/Win32-OpenSSH Takes a lot of work
  18. SignedAdam

    Beta ASUSWRT 386 RC2 public beta with full functions AiMesh 2.0 (continued)

    I know how to do it @ForkWNY everyone seems to be missing the point
  19. SignedAdam

    AiMesh Node going OFFLINE after a few weeks

    You don’t need a client on Windows 10 anymore, enable subsystem for Linux, with in “windows add ons” you’ll find that under add and remove programs. after you’ve enabled subsystem for Linux under windows 10 you’ll have a bash application, just type bash after enabling the add on, then you can...
  20. SignedAdam

    Beta ASUSWRT 386 RC2 public beta with full functions AiMesh 2.0 (continued)

    @ForkWNY explained he wasn’t using the button anymore, I explained the only other way I know of is removing the nodes from the main node network resets them to default. so there’s no need to use the button method after you remove a node from the main node. my question to @ForkWNY : if you...
Top