Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. K

    I don't get smart connect, so I guess I'm dumb...

    You probably have a strong enough signal at that location that the device doesn't NEED the extra hop through the node to make/get/keep the connection. I put nodes in dead spots to serve access from that deadspot where clients drop out on their own. This seems to aid the client device getting...
  2. K

    Solved How can I use Asus RP-AC68U with my Linksys WRT-1900AC router?

    @brownie112 , as an access point the RP-AC68U shouldn't have any true routing capabilities. With it in your system , as an access point, you will still be relying on the Linksys router for actual control of the packets , including the parental controls...
  3. K

    Traffic spike fix from 384.14_2 was reverted in 386.1

    I only get/got these "spikes" when the time on my computer would update or "catch up" as I was monitoring traffic. The time on my router was always SPOT ON but the time in the computer would "drift" from power line voltage/phase fluctuations. This was with a HP dc5800 SFF. When it quit it...
  4. K

    AX88U disconnecting clients on Guest account

    What are the chances the AP on the Public Network is channel hopping ? Have you checked this regularly ? If you don't own the connection ... you might have to "suffer through" this. Or add another cheap AP for your guest network.
  5. K

    AX88U disconnecting clients on Guest account

    Could it be that your router is renewing it's IP address from your ISP that is causing some of the the disconnects ? especially with your vpn ? In my case the problem stemmed from this and in the Wireless setting tab, the channel was set to "Auto" on 2.4 GHz. Every time the chanel would "hop"...
  6. K

    1st attempt at Access Point

    I'm under the assumption this behaviour is because those devices show up in the arp tables for the RT-N66U. Whether or not those devices are connected to it they are reachable by it on its bridged LAN. Since they aren't connected wirelessly,The other devices usually show up in Network Map >...
  7. K

    How to attached to strongest signal?

    The strongest signal might not be the "best" signal. Consider it to be similar to 7th row center stage at a concert versus 1st row far right/left next to the speakers. To much signal could be degrading the "signal quality" at the receiver. And then there are the "nose bleed" seats where the...
  8. K

    ASUS RT-N12E C1: Prevent router from power saving?

    Yes, Thank You. I've missed that little tidbit, apparently, more than once over the years. This is much better than multiple entries and still better than 5 or 6 to 30 comma separated values in the minutes field.
  9. K

    ASUS RT-N12E C1: Prevent router from power saving?

    I seen it's been a while since he'd been here. I followed up with everything , not only for his benefit on his return, but for anyone else that found this having similar issues. After sorting the file and sending it to less, so I could search the file, it wasn't so bad . Surpisingly, ssh login...
  10. K

    ASUS RT-N12E C1: Prevent router from power saving?

    I don't kow if 'cru' works with commas to specify minutes, hours, day, month or week. But it does work with the wild card "*" in each of the time fields. Typing 'cru' in a terminal connected to my router reports back # cru Cron Utility add: cru a <unique id> <"min hour day month week...
  11. K

    ASUS RT-N12E C1: Prevent router from power saving?

    @ Wallace_n_Gromit , You are right. A hyphen isn't needed when using cru with the factory firmware. Good catch. I've tried Open WRT but don't recall much from that short exposure, except the jffs part was used as an overlay. And it's been a while since I'ved used Tomato on one. I'd forgotten...
  12. K

    ASUS RT-N12E C1: Prevent router from power saving?

    Instead of crontab -e to edit a crontab, they use the smaller cru -a to add to the cron settings. With no USB available and no jffs partition on them, I haven't found a good place on an RT-N12D to store this that will persist after a reboot. There is some space for a jffs filesystem , though...
  13. K

    ASUS RT-N12E C1: Prevent router from power saving?

    Are you connecting to the WAN Port or one of the 4 LAN Ports ? If you were connecting to one of the the lan ports and it's not working, I'd replace the RT-N12E's with the RT-N12D version which has wireless bridge mode available as well as the 3 modes you have listed. My 12D's have been very...
  14. K

    ASUS RT-N12E C1: Prevent router from power saving?

    There are differences between Tomato on a RT-N12D and factory firmware on a RT-N12E. "Repeater Mode" is not the same between Tomato and the factory firmware. To get this to work , use "Wireless Bridge Mode" on the RT-N12E .
  15. K

    ASUS RT-N12E C1: Prevent router from power saving?

    As mentioned, Knowing how the RT-N12 is being used makes a difference. If your RT-N12 is in Router Mode getting it's internet connectivity from another router/gateway and it's not in AP mode you face a "double NAT" problem that some client devices don't like. This asumes the heatpump is...
  16. K

    Expectations of AIMesh

    Not quite. At least , not to me. I agree with OzarkEdge, "To Much WiFi" sounds about right. Wouldn't you WANT it to be where the devces are making better use of it's extended range , larger antennas and better signal strength in your weaker areas ? Your speeds may be dropping because the AC68U...
  17. K

    can not remove file from either /tmp/home/root or /jffs

    Gravityz, Phew ! You are Welcome. I had wondered how well it would work for you. Was this used on your RT-AX88U, RT-AC66U or another not listed ? I'd forgotten to mention this was from my RT-N66U with current stock firmware. And may have needed some tweaking if the format had changed...
  18. K

    ASUS RT-N600 not coming online

    Initially your RT-N600 router and the ISP gateway probably were both configured to use the same subnet. The ISP gateway might have been using 192.168.1.254/24 for it's IP address and handing out DHCP allocation in that subnet. And the RT-N600 router was set to 192.168.1.1/24 and also handing...
  19. K

    RT AC86u / 3.0.0.4.386.41634 / Unknown mac's appearing

    You might do some reading up on their Sidewalk feature that provides neighbor hood connectivity by 900 MHZ and Bluetooth4 to otger similar devices as well as tile devices and other LowEnergy bluetooth devices upto 1/2 a mile away. Their MAC shows up because they connect through whatever device...
  20. K

    In some dire need of assistance (AX86U)

    I missunderstood you then that you were having the same problem with your google devices and the ones listed. evesdropping ... if it has a microphone or a mic and camera it has the capacity to record and store/forward anything within it's range. I might be a bit paranoid over this. But then...
Top