Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. P

    openVPN Questions - two simultaneous connections

    it works, start reading from here http://www.snbforums.com/threads/how-to-disconnect-reconnect-from-open-vpn-client-using-batch-file.27678/#post-211989
  2. P

    Dedicate 1 SSID for VPN and 1 SSID for usual with Asuswrt-merlin

    Hi RMerlin, you can see in the script few lines down "dnsmasq --log-async" is called I have tried just by running "dnsmasq" but it doesn't work, it has to be "dnsmasq --log-async" otherwise it doesn't work this combination of 1 VPN dedicated SSID and 1 SSID for normal traffic doesn't mix with...
  3. P

    Is Force acting as Master Browser important?

    I am using ASUS as Master Browser to speed up network sharing discovery, in network where PCs come and go, and there is no active Server or NAS usually Master Browser state is negotiated between computers in one network, but if there are no clients available 24/7 then ASUS router could (should)...
  4. P

    Dedicate 1 SSID for VPN and 1 SSID for usual with Asuswrt-merlin

    there has been a lot of talk about this on the forum, use search first you would need to enable guest wireless networks, assign them different IP range, dnsmasq --log-async, etc. for the beginning you can allow some IP address to go through VPN, so you don't need separate SSID, you could just...
  5. P

    OpenVPN server can't see client's LAN on Site to site connection

    telnet to your router and find "client" file in: /jffs/configs/openvpn/ccd1/ add this command there "iroute 192.168.x.0 255.255.255.0" adjust IP address of your network
  6. P

    Selective Routing with Asuswrt-Merlin

    try this for if VPN1 client is down this should kill all traffic iptables -I FORWARD ! -o tun11 -s 192.168.1.40 -j DROP the same goes for VPN2 client, only difference is interface id iptables -I FORWARD ! -o tun12 -s 192.168.1.40 -j DROP regarding access to FTP outside of VPN tunnel, try...
  7. P

    AB-Solution 1.07 is out!

    I did, I have installed AB-Solution 1.07 for the first time, after adjusting it for "fat 32" installation was painless :) I have chosen "Medium" list, added one test domain to blacklist (it works), can you recommend what should address ads, it seems ads are not addressed I guess Medium list...
  8. P

    AB-Solution 1.07 is out!

    it is not neccessary, my USB flash drive works with FAT32 just fine, it was just the path config "sda1"
  9. P

    AB-Solution 1.07 is out!

    can you please allow installation on USB flash drives? I have USB flash drive connected 24/7, but when I run script and try to install I get this error No ext2|ext3|ext4 devices available. Exiting... I have changed this case $(uname -m) in armv7l) PART_TYPES='ext2|ext3|ext4'...
  10. P

    [Poll] AB-Solution usage

    @thelonelycoder - I didn't use Adblocker on router, but I am willing to try that for sure :) if you are willing to invest time into this project, post your paypal donation address so people who appreciate your effort can send something back as token of gratitude
  11. P

    Enable DNSSEC support question

    thank you @Veldkornet - for asking OpenDNS if/when they will support DNSSEC as you said, quoting their sentence "DNSCrypt and DNSSEC are complementary." it makes no sense they don't support DNSSEC if they have to run DNSSEC in order for DNSCrypt to work I have changed for the moment to Google...
  12. P

    Enable DNSSEC support question

    @Veldkornet - thank you, it works with google public dns I didn't knew that OpenDNS doesn't support DNSSEC I have red something about OpenDNS and DNSCrypt, but I don't recall if they have stated anywhere they don't support DNSSEC. Anyway, issue is resolved :) cheers
  13. P

    Enable DNSSEC support question

    I am using OpenDNS servers (they should be DNSSEC capable) here is DNSSEC test, but I can't get it to work :(( http://dnssec.vs.uni-due.de/ on LAN - DHCP Server - DNSSEC is Enabled any idea how to test this, get it working? AC68U running - 380.58_alpha3
  14. P

    How to Improve Buffer Bloat

    it is easy to do download test within ASUS - Merlin FW router (SSH or telnet) - wget http://some-fast-server-near-you.com/file.test -O /dev/null but how to do upload test from ASUS - Merlin FW router ? is there some way to use this...
  15. P

    OpenVPN performance

    you mean this command? iptables -t mangle -A PREROUTING -i tun21 -j MARK --set-mark 1
  16. P

    OpenVPN performance

    @kvic or @EnF70 is this current (latest, best?) command to mark VPN packets for OpenVPN Server 1: iptables -t mangle -A PREROUTING -i tun21 -m conntrack --ctstate NEW -j MARK --or-mark 0 @Goobi - you are right, put that line in firewall-start and you can check if packets are marked with...
  17. P

    OpenVPN performance

    it isn't bad at all, for advanced home router, 50Mbps VPN speed is pretty decent, and everything above that is just a bonus :)
  18. P

    OpenVPN performance

    here is short test of ASUS RT-AC68U running VPN Client (Core2), downloading 1GB.zip test file from Core i7 OpenVPN server on the other side (Server is using 100/100Mbps) OpenVPN client is using 32Mbps link AES-256 encryption (compression disabled) Asus Merlin FW 380.57, stock CPU speed (not...
  19. P

    OpenVPN performance

    can you please send it as PM "start a conversation" ?
  20. P

    LACP Config for 2x WAN Connections - RT-AC68U

    I think you cant use LAG for WAN, try Loadbalancing instead Wan - Dual Wan
Top