Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. K

    Working Link Aggregation Config RT-AC66U

    no guarantees on any of this, but especially synology devices many people are having issues with synology
  2. K

    Working Link Aggregation Config RT-AC66U

    LinkAgg -h ---- Link Aggregation Version 1.5 Help ---- Dynamically enable Link Aggregation using 802.3ad 802.3ad requires a Switch/PC/NAS which... also supports 802.3ad to function correctly Usage: /path/to/LinkAgg <port> <port> Example: /path/to/LinkAgg 3 4 Only 2 ports are...
  3. K

    Working Link Aggregation Config RT-AC66U

    I can't say that my network is perfect, but I haven't noticed anything that I could point to a cause, or that LinkAgg has caused any issues on my network although, I'm bonded to a switch that does both layer 2 and layer 3 routing so I could forsee, that if there was some issue, the switch...
  4. K

    Working Link Aggregation Config RT-AC66U

    LinkAgg version 1.5 https://www.mediafire.com/?8y3ye3332durchp @ebalsumgo, please test version 1.5 this should solve the issue with status checker
  5. K

    Working Link Aggregation Config RT-AC66U

    unfortunately synology seems to have very limited support for LAG their official device supported list, includes only 3 switches that's 3 specific model numbers and 2 from companies, I had never heard of before many people are reporting problems with synology NAS using LAG Here's a...
  6. K

    Working Link Aggregation Config RT-AC66U

    well regarding status checker, with the output above I can fix that see output 9: vlan3@eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond0 state UP has muliple "UP" maybe due to running vpn not going to be fixed today, it's turkey day here in the states...
  7. K

    Working Link Aggregation Config RT-AC66U

    @ebalsumgo, please do the following and post output robocfg vlan 1 ports "1 2 8t" robocfg vlan 3 ports "3 8t" robocfg vlan 4 ports "4 8t" vconfig add eth0 3 vconfig add eth0 4 echo 802.3ad > /sys/class/net/bond0/bonding/mode echo fast > /sys/class/net/bond0/bonding/lacp_rate ip link set bond0...
  8. K

    Working Link Aggregation Config RT-AC66U

    thanks for the file a very quick look, it says that the ports are not up and running I'll be taking a closer look a bit later tonight something interesting that might be a quick fix after creating a bond it issues sleep 10 I selected 10 because it takes a few seconds for everything to...
  9. K

    Working Link Aggregation Config RT-AC66U

    ok, so we'll have to do a little digging to find out what is failing so clarify my above post there are actually 2 possiblities for deleting a dead vlan 1. on first run attempt script creates vlans creates bond and finally runs a check to make sure everything was successful if it was...
  10. K

    Working Link Aggregation Config RT-AC66U

    it doesn't sound like your running the status command dead vlans are deleted when you re-run the script and it has to first delete the old bond then delete the dead vlans, and recreate new vlans and bond them together status would give you an output of what vlans are used, are they up...
  11. K

    Working Link Aggregation Config RT-AC66U

    what's does LinkAgg status option return LinkAgg -s or LinkAgg --status also you're on AC68U I would assume RMerlin included the bonding driver in the build for the new model, but you can check that module is loaded with lsmod | grep -i bond
  12. K

    Working Link Aggregation Config RT-AC66U

    myself I dont have a synology nas but if you look a page or two back, somebody listed a specific DSM version that was working
  13. K

    Working Link Aggregation Config RT-AC66U

    I guess your just in time synology was non-functional until the last DSM update but I'm glad it's working on a side note, if anybody wants to share what devices have been tested and working, it might be a good idea to get some scope of the various hardware this is working on again, I'm...
  14. K

    AC66U - Slow Transfer Speeds

    maybe I should have read your post more carefully but I thought you were talking about speeds over 2.4 and 5 ghz those settings obviously only apply to wireless not to wired
  15. K

    RT-AC66U - no option for B/G/N?

    here's what's required for N speeds http://www.dd-wrt.com/wiki/index.php/Wireless-N_Configuration
  16. K

    AC66U - Slow Transfer Speeds

    you probably have security set up wrong causing it to default to G speed here's a wiki that talks about what's required for N speeds http://www.dd-wrt.com/wiki/index.php/Wireless-N_Configuration
  17. K

    Working Link Aggregation Config RT-AC66U

    well, I would expect better performance from a dedicated switch as for the 1GB thing, not sure what to say I haven't run any specific speed test on my AC66U with linkagg I enabled LinkAgg on my router to improve throughput from router to switch (primarily to benefit wireless clients...
  18. K

    Working Link Aggregation Config RT-AC66U

    yes you need to copy the script to the router easiest way is just a drag and drop over the network onto a usb drive connected to the router there are of coarse other ways like ftp as well from there you'll need to follow the guides on telnet/ssh as the script is meant to be run from a...
  19. K

    Advice on storage formatting with RT-N66U

    reading that I thought I'd try the paragon extfs driver as well poor to no documentation they make you register to activate AVG actually reported it as possible virus (driver, not does not get registered with system) also while it installed and creates desktop shortcut, does not create...
  20. K

    Working Link Aggregation Config RT-AC66U

    yeah, there's quite a few odities with those players I wrote a number of WDLXTV scripts and themes RMerlin wrote most of the web interface for WDLXTV I'm currently running an SMP on my nework with WDLXTV alpha on it I keep telling myself to build an xbmc htpc but for now ...
Top