Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. K

    Working Link Aggregation Config RT-AC66U

    I'm not sure what else can be done, I think it's clearly some issue on the synology side I sent an email to my Dad, to see if he remembers any tips on synology set up He confirms that synology LinkAgg set up had to be done after the router/switch was set up for LinkAgg so. 1.Confirm...
  2. K

    Working Link Aggregation Config RT-AC66U

    If you're using LinkAgg version 1.2 what is the output of /Path/to/LinkAgg -s if there are no error messages and you're still unable to connect to synology what happens when you do /Path/to/LinkAgg -d using -d does this restore access to your synology?
  3. K

    Asuswrt-Merlin 3.0.0.4.374.33 is out

    reset to default, is not 100% needed and often does not need to be done unless there's a problem unexplained errors/problems could be caused by values that do not change when you flash a firmware, so new defaults are only set when you clear nvram so in general, I think it's a good...
  4. K

    Nvram on ac66u

    nvram = non-volatile RAM (random access memory) it stored all device settings delete/clear will not make the device any faster however, it's sometimes needed to clear out old settings that are not used anymore example: sometimes a new firmware will change the default value for a...
  5. K

    Working Link Aggregation Config RT-AC66U

    Since there will always be just one more thing LinkAgg 1.2 extended help menu create delete bond function combined error recovery and status checker into 1 function remove dead/unused vlan's when delete bond extended output of status checker lots of script clean up #!/bin/sh #...
  6. K

    Working Link Aggregation Config RT-AC66U

    try - A. plug in both sets of cables then try set up LinkAgg on router first can you still reach synology NAS ? if yes, proceed to set up LinkAgg on synology NAS or try - B. plug in both sets of cables set up LinkAgg on synology NAS set up LinkAgg on Router (according...
  7. K

    Working Link Aggregation Config RT-AC66U

    Updated Script LinkAgg 1.1 Script Clean Up Consolidated redundancies into functions Add Help menu : -h --help Add Status Check : -s --status If bond creation failed set vlan1 back to "1 2 3 4 8t" At the moment I can't think of anything else that I should add #!/bin/sh #...
  8. K

    Working Link Aggregation Config RT-AC66U

    Exactly what is wrong with the NAS? what error message are you getting? the synology LinkAgg instructions page seems easy to follow http://www.synology.com/support/tutorials_show.php?q_id=525&lang=us
  9. K

    Working Link Aggregation Config RT-AC66U

    ok here's an attempt at a script for doing this Download LinkAgg I've run a bunch of test and it seems to work fine even if you run it multiple times without rebooting Usage: /path/to/LinkAgg <port> <port> Example: /path/to/LinkAgg 3 4 Only 2 ports are currently supported #!/bin/sh if [ $#...
  10. K

    Save setting to nvram

    the cmd you list above, would only change jumbo setting for 1 port not all ports and if you want it on all ports isn't there a check box in the gui for doing that and I also agree with RMerlin Jumbo frames are more trouble than it's worth and it will probably negatively effect...
  11. K

    Save setting to nvram

    it would be easier to simply add that line to /jffs/scripts/services-start or your original idea saving a value would mean saving 0 & ON , those are the values robocfg is the program port and jumbo are specific cmd's used to set the values above you would need a script that knows what...
  12. K

    Working Link Aggregation Config RT-AC66U

    @saintdev so test your latest script above here's the output from cmd line t@RT-AC66U:/jffs# ./LinkAgg Invalid ports ' 8t'. Invalid ports ' 8t'. cat /proc/net/bonding/bond0 seems to show no issues, and ifconfig shows vlans 3 & 4 robocfg show on the other hand does not...
  13. K

    Working Link Aggregation Config RT-AC66U

    getting tired, but page 3 script works fine on AC66U so yes robocfg works and sysfs works will get to the latest script, maybe tomorrow
  14. K

    Working Link Aggregation Config RT-AC66U

    my thoughts on it, is that there are so many possiblities I can understand providing a default script probably port 3 & 4 this would meet the needs of 95% of anybody doing this everybody else should probably just configure manually what about other bonding modes, etc .... too many...
  15. K

    RT N66U Client list bug?

    @RMerlin new logfile sent via PM so in my test with networkmap-mips running at boot same issues 1 client not displaying in list so next to test the timing issue I insert sleep 10 before calling networkmap-mips and it works just fine on boot
  16. K

    Working Link Aggregation Config RT-AC66U

    I'll test it out tonight as well, after I run those networkmap tests I'll be leaving work in a few minutes another thing I thought of, we might want to check that vlan3 or vlan4 etc do not already exist before we create them, they could already be in use
  17. K

    RT N66U Client list bug?

    did you first killall networkmap before you tried running it again
  18. K

    RT N66U Client list bug?

    another thought, maybe it has something to do with jffs/scripts/services-start for those of us running extra scripts, that are either reconfiguring network, or etc ... I wonder if that has any impact ie networkmap stars, but then some ports are reconfigured, etc ... which causes...
  19. K

    RT N66U Client list bug?

    we don't know yet, as the networkmap code is not changed at all
  20. K

    Working Link Aggregation Config RT-AC66U

    @anders, your output still shows router is configured correctly the problem is with the synology can't help much with that, but did you try reboot both router and synology @RMerlin you make me laugh if saintdev doesn't beat me to it, I'll modify the script tonight
Top