Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.20308 for All Supported Products

    Well, I can tell that the threshold in roaming assistant is a little bit tricky. In general, you need to set it lower (e.g. -70db) if your router/nodes are further apart and set it higher (e.g. -60db) if your router/nodes are nearer to each other. You can decide this settings by using a wifi...
  2. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.20308 for All Supported Products

    I will do the upgrade when I get back home. But seems this version only fixed the upgrade UI, still waiting for MAC address filtering and unexpected disconnection of STA fixes.
  3. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    You mean will NOT impact anything?
  4. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    use command line, set log level to 7, original is 6, and reboot the node/router using reboot: nvram set log_level=7 nvram commit reboot
  5. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    This is only one of the strategy applied in the mesh, I have study a lot about Mesh system and seems most of them are not standardized yet. Although there are IEEE standards out there, many devices including phones, pads, routers, etc. are not conform to the standard yet. So even though the...
  6. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    I have submitted this before and after some observation, this may due to wireless reconfiguration which makes the packets failed to send when the wireless device are down during reconfiguration.
  7. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    You can write a script to ssh to your node to reboot them. You can install this script in the router/ap as well, but you need some Linux knowledge.
  8. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    I am helping out the ASUS team to solve the problems that I have discovered. I think the best way to get it work is not complaining, but helping out the testing and debugging. They are doing a great job, but need to make sure all different devices with different hardware can work properly is...
  9. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    Yes, sometimes old settings in the router will make the node not binding.
  10. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    I think I can help, I have setup my AiMesh system with 3 devices: 88U as AP and 88U + 68U nodes. It is a bit tricky to add AiMesh nodes, I have some experiences: 1. Need to make sure router and nodes need to be factory reset (press WPS button -> power on -> wait for power led to flash ->...
  11. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    A few questions about the functionalities of AiMesh: 1. Will AiMesh scan the environment and choose the best channels for different router/node? What is the frequency of this checking and may cause the router/node to change channel? 2. Will AiMesh dynamically adjust the TxPower of each...
  12. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    I have some more experience about how to put AiMesh system in a stable state. Once I have setup the AiMesh, if I want to work out some restarting, the rebooted system may not be stable anymore. I have tried many different reboot procedures and found that this is the way that gives the...
  13. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    I have experienced Wifi disconnection even though my STA did not moved around, let see what can we do to nail down the problem: I have a MiPad with MAC address [c4:0b:cb:50:ab:e3] placed in my room and I used it to play a network game and experienced many Wifi disconnection. From the syslog in...
  14. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    Merlin's firmware cannot support AiMesh in future release since AiMesh is close source. So it depends if you need AiMesh.
  15. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    I have done my upgrade manually, one by one using the manual link in the setup, here is my procedures: 1. Upgrade the nodes first, I just want to make sure the router/ap to keep up without rebooting before all the nodes are done. 2. After each node upgrade, need to wait a while for the node to...
  16. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    Agreed, that is why I did a lot of tests and help out the debugging with ASUS team. They are doing amazing things and need a lot of effort to make it stable, especially when doing a setup with hybrid devices like me 2 x 88U + 1 x 68U.
  17. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    Good news, I have already updated to this version successfully. Monitoring the stability.
  18. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    Well, if you are technical enough, there is a way to selectively choose to restore what config back to the router after factory reset. You need to enable telnet / ssh to the router and make use of the nvram command to list out all the config and selectively put it back by command line / linux...
  19. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    Already send you my e-mail.
  20. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    Yes, that is true, suspect that there are some problem when pushing the wifi settings from 88U to 68U. I have checked some nvram settings and cannot found any problem, both the maclist and macmode are configured properly in the 68U. Not sure if there are any other settings that matters.
Top