Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. mikecpt

    [Fork] Asuswrt-Merlin 374.43 LTS releases (Archive)

    I did do a reset and nvram reset before the actual firmware uplaod to in the recovery "mini web server" in fact it wouldn't make sense otherwise since the previous was actually "1 2 3 4 8*" also the nvmram tirck does not work after reboot! I'm scripting it using robocfg but yeah this does seem...
  2. mikecpt

    [Fork] Asuswrt-Merlin 374.43 LTS releases (Archive)

    I just reseted my AC66U via Recovry (nvram reset) then firmware upload so all is clean. I noticed that port 3 and 4 don't give me dhcp, while in tools they report a cable is connected and at 1Gbps, so I figured I could be related to vlans! My ISP requires vlan 100 on internet, so I picked...
  3. mikecpt

    End of year 2017 development update

    >You can have all that and more with john9527's LTS RMerlin fork today. Not really that's based on older firmware doesn't include patches from some security issues like KRACK etc (I do use it on my older RT-N66U). I spend some time on this by following what merlin was documented on git (which...
  4. mikecpt

    End of year 2017 development update

    Seems like asus still keeps the AC66U alive and they released more updates, also source code for `GPL of ASUS RT-AC66U for firmware 3.0.0.4.382.51634` was just released. TBH the thing I want most is ssh on this one, the ability to run a script at boot would be nice (but it seems that might...
  5. mikecpt

    RT-AC66U - Script for separate VLANS and Subnets with DHCP

    I think I just found the problem... the device I was testing had a static address set by MAC address. Sorry for the noise.
  6. mikecpt

    RT-AC66U - Script for separate VLANS and Subnets with DHCP

    I'm trying a similar setup as the 1st post, but trying to get DHCP to work, I've added the dnsmasq config (note that I use vlan3 and br3 instead of 6) ## Seperate dhcp subnet interface=br3 dhcp-range=br3,192.168.1.2,192.168.1.254,255.255.255.0,86400s dhcp-option=br3,3,192.168.1.1...
  7. mikecpt

    End of year 2017 development update

    So in end of May Asus released 382 for the AC66U Version 3.0.0.4.382.50470 - 2018/05/21 However since this is still MIPS, I assume this is still not getting updates from the 382 new branch right?
  8. mikecpt

    DNScrypt dnscrypt installer for asuswrt

    I'm facing the same issue using a AC66U model with v 2.0.3 any ideas?
  9. mikecpt

    Vodafone PT configuration

    Have any of you guys been able to get IPV6 working ? I can enable IPv6 in native mode and see this: Devices do get an IPv6 but no IPv6 DNS, see: ISP status page show that I do have both a IPv4 Adress and IPv6 delegated prefix: @hggomes ? algum sucesso? :p
  10. mikecpt

    Dnscrypt from opendns

    Hum... I was re-reading my old comments and investigating more... he issue is not dnsmasq at all, in fact if I point dnsmasq to my local server runing unbound+dnscrypt it works perfect! So the issue must be dnscrypt it self! With: admin@RT-N66U-13C0:/jffs/configs# cat dnsmasq.conf.add...
  11. mikecpt

    Dnscrypt from opendns

    Yes, following the guide: https://github.com/RMerl/asuswrt-merlin/wiki/Secure-DNS-queries-using-DNSCrypt And I've also tested setting the nameserver to 127.0.0.1 without adding the no-resolv option, results are the same!
  12. mikecpt

    Dnscrypt from opendns

    Wait, but it fails on tomato firmware too, where I also have dnscrypt+ dnsmasq instead of unbound.... so I doesn't make sense (Ipv6 is off on that router actually) I did disable ipv6 on the Asus just to be sure, and I still see the same issue with both routers... surely there's something in...
  13. mikecpt

    Dnscrypt from opendns

    Hum... Interesting I do use Ipv6, but I'm not using ipv6 resolver, In any case thanks for pointing me to that I will test :)
  14. mikecpt

    Dnscrypt from opendns

    Is it working for you went you test with "welcome.opends.com" for try the dig/drill query? I still can't understand why this fails I have 2 routers, one asus one linksys (with tomato firmware) Both are able to run dnscrypt, dnsmasq proxies the requests but opendns test stilll fails! Yet...
  15. mikecpt

    Horrible wireless speeds with AC66U on Merlin 376.49_4

    I've notice the same issue with my RT-N66U, with John's fork In the point most far way from the router (this is about 15mts) I get a very low signal on 5Ghz a Slightly better on 2.4Ghz top speeds on the 15-20Mpbs range with several devices connected and streaming from my Plex Server to my...
  16. mikecpt

    Dnscrypt from opendns

    stop dnsmasq and edit the S09dnscrypt-proxy script to use port 53... And by correct output I mean "drill txt debug.opendns.com" show dnscrypt is enabled!
  17. mikecpt

    Dnscrypt from opendns

    Hum... I killed dnsmasq and put dnscrypt-proxy listening on 53 and this way drill shows the correct output... :confused:
  18. mikecpt

    Dnscrypt from opendns

    This is basically the same issue I'm seeing, traffic does not seem to be encrypted the router to the server. welcome.opendns.com test fails and: drill txt debug.opendns.com @1 27.0.0.1 -p 65053 also doesn't show the key info, while: drill txt debug.opendns.com @10.10.50.10 (this is a...
  19. mikecpt

    Dnscrypt from opendns

    Installed drill from opkg and doing: drill txt debug.opendns.com @127.0.0.1 -p 65053 Doesn't seem to be using dnscrypt! ;; ->>HEADER<<- opcode: QUERY, rcode: NXDOMAIN, id: 54315 ;; flags: qr rd ra ; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;; debug.opendns.com...
  20. mikecpt

    Dnscrypt from opendns

    Is it really using dnscrypt? I've installed the pkg on my asus router and follow the steps, dnscrypt is running and log shows if proxying, see log: http://pastebin.com/raw.php?i=a6t7qn0p However I've used tcpdump to capture all the traffic for a little bit and opened some sites like...
Top