Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. R

    Best and most optimal settings (Voxel & Kamoj)

    normally, you wouldn't touch stuff in the /overlay partition directly. You would just make your modifications in /opt/scripts/firewall-start.sh and let the overlay-fs driver create the file. Which device are you using? Is the overlay-fs enabled? On RBR it isn't by default. And if you then try...
  2. R

    Configuring network time on Orbi

    stopping and starting the ntpclient would probably force it to immediately try setting the time. i.e doing: /etc/init.d/ntpclient restart note for some reason on my R7800, if I restart that service, it does only stop the service and doesn't restart it. So for me the only thing that is...
  3. R

    Best and most optimal settings (Voxel & Kamoj)

    You know you need to press 'i' before you can change stuff in Vi?? or just use nano
  4. R

    Configuring network time on Orbi

    Not sure if this works on RBR, but you could try: nvram set manual_ntp_server=x.x.x.x nvram commit or change via router web interface via http://router-ip/NTP_debug.htm
  5. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    I assume you configured something via "Advanced settings -> Dynamic DNS", so that you can use a dns-name in your cloudfare settings. I'm using dyn.com -> if I logon to dyn.com then I can see the IP-address that is registered at them. (the router periodically makes a http connection to dyn.com...
  6. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    I would use for instance "curl ifconfig.me" via telnet / ssh directly on the router. And see if there is a difference between no vpn, vpn and vpn+routerbypass. (no vpn and vpn+routerbypass should show the same IP; vpn should show a different one.) Then I would look at the IP-address that is...
  7. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    I already mentioned Transmission. Another reason is if you don't trust your ISP (or the country where you live in). If you bypass VPN for the router itself, then all the traffic that the router initiates, goes directly to the internet. So also all DNS requests do. Thus your ISP (or perhaps...
  8. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    By default, all outbound traffic goes via OVPN. This gives two issues. - DynamicDNS registers the OVPN IP-address -> Connections to your router end up at the VPN provider. And unless you have an advanced provider where you can configure port-forwarding, those connections will be dropped. - If...
  9. R

    Voxel Custom firmware build for R7800 v. 1.0.2.94SF

    I think Voxel tried to change as much as possible to use the latest openssl version. But not everything was compatible. According to the change logs: 1.0.2.63SF: 12. OpenSSL: old libraries 0.9.8 are added to fix NG bug (/bin/fbwifi). 1.0.2.67.1SF: 1. curl package: revert to OpenSSL 1.0.2 (to...
  10. R

    Rbr50v2 Conversion

    looking at the gpl sources: ./dni_home/package/dni-platform/files/lib/dni_platform/project/dni_project.sh: #Create /tmp/orbi_type to indicate that It is Orbi Base or Satellites. ./dni_home/package/dni-platform/files/lib/dni_platform/project/dni_project.sh: [ "$model_prefix" = "R" ] &&...
  11. R

    Voxel Custom firmware build for R7800 v. 1.0.2.92.3SF

    I think I had similar issues in the past. My solution was configuring the 5 GHz to be on a Non-DFS channel. If I use a DFS channel, then 5 GHz would drop at random times.
  12. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    well perhaps it should, but its programmers probably assumed that would be run on a disk with sufficient space to always at least store 6 hours of logs. Options: reduce the amount of hours of query-logs to retain (or disable if you already had it at 6 hours). Or (as I explained a few posts up)...
  13. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    with top2 I meant running it from within a ssh (or telnet) session. looking back at my earlier posts: (and assuming our USB gets mounted to /mnt/optware ) stopped AGH via add-on GUI (setting DNS filter/encryption to none; had to do this a few times before it would stick) and then from ssh /...
  14. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    I don't really have a ram issue on my R7800 (it's 78%) You could use top2 to see which processes use the most. start top2 then press x so that one of the columns gets blue (so you can easily see what it is sorting on) then use < or > to move the sorting to Mem%, VIRT or RES I attached a sample...
  15. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    Do you have both OpenVPN and Wireguard enabled at the same time? Because I don't think that is supported. also, how did you conclude that you cannot connect to external hosts? did you only try connecting via DNS name? or did you also try connecting via IP-address. (for instance ping 8.8.8.8)...
  16. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    I cannot answer for an R9000 in AP mode. But an R7800 acts as follows: with DNSCrypt enabled via Kamoj: clients who are configured to use the router as DNS (for instance via DHCP), send their DNS queries to router IP via port 53. dnsmasq on the router intercepts the request and forwards it to...
  17. R

    Voxel Help needed with iptables rules

    I just tested this: router = 192.168.1.1 MacBook = 192.168.1.4 test DNS server in Azure = 10.40.0.10 I have an OPNsense firewall on a VM (192.168.1.5) that maintains an IPsec tunnel to Azure and routes the traffic there On the router I added only these 2 rules iptables -t nat -I PREROUTING -p...
  18. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    I didn't notice any slowdowns Where do you check the amount of DNS queries? Because there are 2 configurable settings. Amount of hours/days to retain query logs Amount of hours/days to retain statistics. (and strangely, AGH allows to use a lower number for the statistics than for the queries...
  19. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    And another update: it seems that also the link for AGH in the Kamoj Menu gets broken after moving the AGH folder to USB. It now points to http://routerlogin.net: on my router. So I guess the script that is responsible for generating the links in that Kamoj Menu also needs to know that the...
  20. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    Update: for me after some time also DNS failed when I redirected Adguard Home to USB disk with the above method: Solution: delete /opt/scripts/firewall-start-adguardhome.sh and restart AGH. (if this file exists, then the AGH startup-script does not recreate / modify it -> it then is still...
Top