Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. R

    Voxel Custom firmware build for R7800 v. 1.0.2.79SF

    Well, I got my R9000, flashed Voxel, ran the commands and it's working great! I used powerline ethernet (only option) to use my R7800 as an AP in my office. Throughput isn't the best but it works and seems stable. I'm renting so I'm not going to run ethernet cable all over the place! Thanks for...
  2. R

    Voxel Custom firmware build for R7800 v. 1.0.2.79SF

    Thanks!
  3. R

    Voxel Custom firmware build for R7800 v. 1.0.2.79SF

    I'll be running this through telnet as needed (not too often as I don't reboot unless I need to. I know purists may take issue with the UPNP being active but I want to set this and forget it. I made some mods based on the last few posts, any problems with this code? nvram set nocloud=1 nvram...
  4. R

    Voxel Custom firmware build for R7800 v. 1.0.2.79SF

    Thanks all! I'm just going to run it through telnet unless I can learn the USB thing quickly. I don't reboot often unless I have issues and it's easy enough to telnet in. This router is about as clean as it can be from what I can tell, so either I have interference or hardware issues. I won't...
  5. R

    Voxel Custom firmware build for R7800 v. 1.0.2.79SF

    Thanks for your help. I should add that last line or replace it? I pasted all of this in and telnet got weird. One line at a time seemed to work, but I'm not sure how I can tell. nvram set nocloud=1 nvram set nokwilt=1 nvram set transmission_disable=1 nvram set qos_endis_on=0 nvram commit...
  6. R

    Voxel Custom firmware build for R7800 v. 1.0.2.79SF

    I copied these all to a word doc for reference. Do some of these commands need to be performed in batches with reboots in between? I basically pasted this in to telnet: nvram set nocloud=1 nvram set nokwilt=1 nvram set transmission_disable=1 nvram set qos_endis_on=0 nvram commit [ -x...
  7. R

    Voxel Custom firmware build for R7800 v. 1.0.2.79SF

    Thank you! One last question: Will these same commands work on the R9000?
  8. R

    Voxel Custom firmware build for R7800 v. 1.0.2.79SF

    Thanks! Anything else that can be disabled?
  9. R

    Voxel Custom firmware build for R7800 v. 1.0.2.79SF

    I have reverted back to 79 as 80 seemed to be giving me issues. I too only stream/game/work etc. I have no use for ReadyCloud, FileSharing, etc. I have disabled QOS, Smart Connect and anything not needed. I have also run the commands in the previous post. I'll be running the QOS ones as well to...
Top