Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. W

    Connecting 2 VLANS for 2 Guest Wifi

    About to run this for the first time, been sick for most of the week so just been sleeping, when I run services-start before putting it into scripts, the orig scipt has lan_ifnames while mine does not, if you look above you can see 0.1, 0.2 is part of lan_ifnames so do I need to set that as...
  2. W

    Connecting 2 VLANS for 2 Guest Wifi

    I did some research and found the article below so maybe I need eth2 as ifconfig shows eth0 and eth1, and then per the article listed below I ran the following: #nvram get lan_ifnames vlan1 eth1 wifi0 wl0.1 wl0.2 # brctl show bridge name bridge id STP enabled interfaces...
  3. W

    What lan_ifnames to use when creating new bridges?

    I am about to run a script for the first time to configure a new bridge and move the guest wifi/new vlan to it. I am not quite getting which interfaces I should set for lan_ifnames: #nvram get lan_ifnames vlan1 eth1 wifi0 wl0.1 wl0.2 # brctl show bridge name bridge id STP...
  4. W

    Connecting 2 VLANS for 2 Guest Wifi

    I was looking at the output to brctl show again and saw that for br0 I show only these interfaces(directly copied and pasted from SSH client): vlan1 eth1 wl0.1 wl0.2 I updated the bridge reset line from: nvram set lan_ifnames="vlan1 eth1 eth2" to nvram set lan_ifnames="vlan1 eth0 eth1" I add...
  5. W

    Connecting 2 VLANS for 2 Guest Wifi

    I just went through the thread and checked all my post so you can stop posting "typo" posts.
  6. W

    Connecting 2 VLANS for 2 Guest Wifi

    It has been fixed directly on my computer so no need to worry, anything on here is just to verify the wonderful help Grifo has given me.
  7. W

    Connecting 2 VLANS for 2 Guest Wifi

    Got it, just finished editing the ones you posted to match my AP So I will run the OP script once and then save it as service-start in jffs Also will add 2 new scripts service-event-end which is a copy of what you posted Here is the script I will add to jffs called bridge-reset: #!/bin/sh...
  8. W

    Connecting 2 VLANS for 2 Guest Wifi

    OK so I have not done anything just yet, so I should run the first script i put together to get everything set and then put it in jffs called bridge-reset instead of wan-start and then take the small script above and call it service-event-end so once I run the script to set everything to keep it...
  9. W

    Connecting 2 VLANS for 2 Guest Wifi

    Simple enough. Can you confirm if you have this issue for me? I went through all the pages and all work perfectly, but when I went to wireless>professional it was mostly white like the CSS partly failed, i could see and modify the professional settings, but the section around it and the sidebar...
  10. W

    Connecting 2 VLANS for 2 Guest Wifi

    Whats the deal with the "t" and "u" next to the port numbers when running robocfg show?
  11. W

    Connecting 2 VLANS for 2 Guest Wifi

    Opps! I will add the ones you posted, thanks again!
  12. W

    Connecting 2 VLANS for 2 Guest Wifi

    Thank you so much, you have been super helpful, i will update with the commands given. I think you are seeing an older update, i removed robocfg completely after the last post from the person that just said no it wont work. I actually changed the high VLAN numbers I had preset to lower ones as...
  13. W

    Connecting 2 VLANS for 2 Guest Wifi

    What is the highest VLAN number I can create? I know to avoid 1-3 per other posts.
  14. W

    Connecting 2 VLANS for 2 Guest Wifi

    I changed the script per your comment to reflect only the wifi I am working with.
  15. W

    Connecting 2 VLANS for 2 Guest Wifi

    you can thank copy and paste into xenforo for that, it is showing fine in my editor, just need to determine which port is being using by the 2.4Ghz guest nets, once I know that I can add more later if needed, not going to use 5Ghz anytime soon.
  16. W

    Connecting 2 VLANS for 2 Guest Wifi

    So i now know "Port 1 on the 87U is 'special' and is indeed tied to the 5GHz Quatenna radio" 0,2,3,4 are the switch ether ports so if I can just get some confirmation which port to use for the guest wifi networks I will be set. I know the interface names, just need to determine the port for the...
  17. W

    Hi, i came across your script and looks like exactly what I would like to do to my new merlin...

    Hi, i came across your script and looks like exactly what I would like to do to my new merlin AP: could you explain these 2 parts as I just installed merlin? robocfg vlan 9 ports "4t 5t" nvram set lan_ifnames="vlan1 eth1 eth2 wl0.2 wl1.2" here is my post...
  18. W

    Connecting 2 VLANS for 2 Guest Wifi

    If the ASUS was a router then yes it would work but ASUS is AP only per the github it says: wl01_DHCPSTART Start of DHCP pool (2-253) wl01_DHCPEND End of DHCP pool (3-254) The ASUS is not a router so cant do this
  19. W

    Connecting 2 VLANS for 2 Guest Wifi

    I spent time looking and landed on this https://www.snbforums.com/threads/ssid-to-vlan.24791/#post-191187 As I said I just installed merlin a day ago and learning the system EDIT: it is limited to 2.4Ghz guest nets so what if I want a 5Ghz? Also says nothing about using VLANs EDIT2: cant use...
  20. W

    Connecting 2 VLANS for 2 Guest Wifi

    So a day ago literally i just installed asuswrt-merlin and love it! I would like to use 2 VLANS setup on my pfsense firewall for each of the guest wifi's now that I have that option. I figured out the guest wifi interfaces from brctl show which are wl0.1 and wl0.2, super simple. Before the...
View older results
Top