Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. D

    Garbled/Robotic audio on Wifi calling on Bluetooth

    Is there anything we can do to reduce this? I know I have that Bluetooth coexistence turned on and that other option, for WMM Enable WMM Enable Enable WMM No-Acknowledgement Disable Enable WMM APSD Enable
  2. D

    Garbled/Robotic audio on Wifi calling on Bluetooth

    Just a followup, keeping my phone only hooked to 2.4ghz didn't fix it, I told the iPhone to forget the 5ghz SSID, so it wouldn't connect to it, and still got the garbled/robotic noise. Same fix of flipping call back to iphone and then back to Bluetooth fixes it. So doesn't seem like its the...
  3. D

    Garbled/Robotic audio on Wifi calling on Bluetooth

    Ok, this might be a long thread, so apologizing up front, need to try to lay out as much detail as possible here. I have currently two Asus AC68 (one is a U and one is the P model). Both are running the latest Merlin 380.59 Beta 2 firmware. I have the feature set on the AC68 called Roaming...
  4. D

    AC68w/u 1000mhz - Reasonable expected routing speeds?

    I actually just tested this. Put it on AES-128-CBC mode. Went to a different ISP (Comcast), installed OpenVPN client on that Windows7 machine. Connected back to the Asus AC68P, and transferred a file through Windows share. I looked at the Traffic Analyzer in Asus, and saw it go from 7KBs/sec...
  5. D

    AC68w/u 1000mhz - Reasonable expected routing speeds?

    Ive thought about it, but would rather have an appliance, been thinking about the Unifi USG device, but im not a fan of it due to a lot of complaints about its GUI and a lot of bugs. Might have to keep looking. Dixit
  6. D

    AC68w/u 1000mhz - Reasonable expected routing speeds?

    I have a AC68P (similar and same CPU speed) and I have an ATT Gigabit fiber coming to the house. Gigabit up and down. I have the latest 380.58 firmware and Im able to basically saturate the gigabit both up and down practically as per this speedtest. Here is one taken just 4days ago for me...
  7. D

    Gigabit internet with Asus AC68U running slow

    So I figured this out. Tried another machine hooked into the same Asus router , that machine was easily getting in the 700s both ways on the ATT Speedtest. So tried the original server again, same issue, still barely 70 down as the speedtest shows. So at this point knew it was down to the...
  8. D

    Gigabit internet with Asus AC68U running slow

    Here some speedtests from just now with the Asus behind the ATT Gateway. These are done off my high end desktop (corei7, 16gb ram, SSD) connected via Gigabit to the Asus. Now here is the same server, same test, except using now Charter's server which is also close by. Clearly the...
  9. D

    Gigabit internet with Asus AC68U running slow

    Let me try to explain my issue. I have an Asus AC68U running the latest stable Merlin firmware (378.56). I just switched over to ATT Gigapower (gigabit internet via fiber to your house). When it was installed about 8-9days ago, they installed an ATT Gateway (like a modem, its a PACE 5268AC)...
  10. D

    Need feedback on proposed rule for state INVALID check in iptables

    Yeap, I used this script thanks to john9527 for pointing this out to me. I use this (from post1) for my firewall-start script to fix an issue where I have two networks connected between my two houses that are about 600ft apart. Dixit
  11. D

    Incoming Static Route issue

    Thank you john9527, appreciate it. That script worked as well, Im running the latest Merlin release 378.53. I used the script from post 1. Dixit
  12. D

    Incoming Static Route issue

    I googled this and seems like this is a standard rule for Linux based firewalls (I believe based on my googling) and this is basically dropping INVALID packets because the firewall thinks its a device spoofing. The cmd above was deleting rule. So some believe its not an issue but some do. I...
  13. D

    Incoming Static Route issue

    I believe that cmd you gave me fixed it. I attempted to ping the 192.168.1.10 from the HouseA side, failed as usual. Issued that cmd via SSH on the Asus AC66R. Redid the ping, and it works. Can seem to ping all my devices on the HouseB side. I don't fully understand that thread (sorry this...
  14. D

    Incoming Static Route issue

    Sorry for more replies, but just digging more into this. Just out of curiosity, I decided to ping from 192.168.1.10 to 192.168.0.123 (basically in reverse of post 2 example), it pinged and replied fine. While it was pinging I decided to try the ping example again from post 2, so from 0.123 to...
  15. D

    Incoming Static Route issue

    Here is some more info that seems to somewhat narrow it down some more. I feel the entire R7000 static route side is fine. Here is why. Example: HouseA PC, 192.168.0.123 (in this example) pings 192.168.1.10 (server on HouseB side). I ran a Wireshark on the HouseB server I was pinging. Ran...
  16. D

    Incoming Static Route issue

    I have this very weird problem, and its been racking my brain. Let me try to explain this the best I can. I have two houses, about 650feet apart. HouseA is on the 192.168.0.x/24 network. HouseB is on the 192.168.1.x/24 network. They are connected to each other with the use of a pair of...
  17. D

    How to run the IOZONE benchmarks

    No doubt there. I was initially just thrown off on how the values from IOZONE came in at way above the gigabit threshold. Dixit
  18. D

    How to run the IOZONE benchmarks

    //computer/share is the proper syntax when using the command on windows, if you use the \\computer\share it will error and tell you must use the other method. It is definetely hitting that share as I can see the NAS jamming away. 00Roush hit it on the head, I forgot to update this thread...
  19. D

    How to run the IOZONE benchmarks

    So Ive read the "How We Test Networked Storage Devices - Revision 3" which is linked here: http://www.smallnetbuilder.com/nas/nas-howto/30682-how-we-test-networked-storage-devices-revision-3 Now the command they use is this: iozone -Rab [results file name] -i 0 -i 1 -+u -f [path to directory...
View older results
Top