Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. S

    [384.15_Alpha - builds] Testing all variants.

    Hi After the installazione of alfa2 version on my rt-ac86u, from amtm menu u I see this error: amtm 3.1.0 FW by thelonelycoder RT-AC86U (aarch64) FW-384.15 @ 192.168.1.1 The Asuswrt-Merlin Terminal Menu 2 open Skynet v7.0.9 4 open YazFi...
  2. S

    Aimesh node information

    thanks for the replies. The ip addresses are different, what I noticed is that the problems have been born since I installed the 384.14 on the rt-ac86u router. Now I am testing version 384.15 and at the moment I am not experiencing problems or need to restart the nodes.
  3. S

    Aimesh node information

    Hello I use an rt-ac68u and a dsl-ac68u with stock firmware as aimesh nodes. Is it possible to use their ethernet ports too? I tried to connect a PC linux to one of the ports but since I connected it I have had problems with the wifi (some IOT devices connected and disconnected). The problem was...
  4. S

    RT-ac86u - printer doesn’t connect in wifi

    Hi I waited two days to be sure. Now the printer connects, what did I do to fix ... I only restarted the rt-Ac68u, it is an aimesh node (not the router). I don't understand the solution ... but it worked.:rolleyes: P.s. The Ac68u is with the last version of the stock firmware. Thanks to all.
  5. S

    RT-ac86u - printer doesn’t connect in wifi

    I’m using this setting. Nothing :(
  6. S

    RT-ac86u - printer doesn’t connect in wifi

    Hp officejet 4630
  7. S

    RT-ac86u - printer doesn’t connect in wifi

    Hi Already tried to reset the printer. The ssid name is the same that I have been using for years and the password too (all without special char or other). I tried to connect the printer to another wifi network and it connected without problems (wifi not generate from my router) This is the...
  8. S

    RT-ac86u - printer doesn’t connect in wifi

    Hi Since I installed the 384.14_2 version on my rt-86u (it is the node of aimesh) my hp printer no longer connects to the wifi created by the router or to an aimesh client (the AiMesh client is a rt-68u with stock firmware) :(. I can connect it to another ssid generated by an AP (then the...
  9. S

    kernel: Hardware name: Broadcom-v8A (DT)

    Hi Yes, with the modifications it works. Thanks for the tips.
  10. S

    kernel: Hardware name: Broadcom-v8A (DT)

    Hi I tried the script, but my problem doesn't seem to be the one related to dcd. it doesn't always appear, sometimes every hour, sometimes every few minutes
  11. S

    kernel: Hardware name: Broadcom-v8A (DT)

    Thanks for the reply. But is it a report that will be resolved? because It fill the log.
  12. S

    kernel: Hardware name: Broadcom-v8A (DT)

    Hi In the system log of my router ac86u, I see these messages appear several times: Jan 4 22:14:39 kernel: Hardware name: Broadcom-v8A (DT) Jan 4 22:14:39 kernel: task: ffffffc0157d0100 ti: ffffffc015108000 task.ti: ffffffc015108000 Jan 4 22:14:39 kernel: PC is at 0x10772c Jan 4 22:14:39...
  13. S

    RT-ac86u problem with 384.14

    Sorry for the continuous repetition of the problem, but I can't use the router, at every reboot the message appears every 10/15 seconds forever, and the only way to reduce the quantity of these logs is to reboot without the HDD connected. At the end of the restart I can reconnect it and the...
  14. S

    RT-ac86u problem with 384.14

    Hi After the upgrade from version .13 to .14, in the system log sometimes appears this message: Dec 15 14:38:08 kernel: pgd = ffffffc014024000 Dec 15 14:38:08 kernel: [00000000] *pgd=0000000015182003, *pud=0000000015182003, *pmd=0000000015183003, *pte=0000000000000000 Dec 15 16:37:50...
  15. S

    [Release] Asuswrt-Merlin 384.14 (and 384.13_2) are now available

    +1
  16. S

    [Release] Asuswrt-Merlin 384.14 (and 384.13_2) are now available

    This ssd is the same disk that I used with the previous version (.13). On the ssd I had installed the swap file + yazfi guest + diversion + amtm + entware. After the format I just reinstalled amtm + swap file + yazfi guest + entware With the previous version I never see this type of kernel log.
  17. S

    [Release] Asuswrt-Merlin 384.14 (and 384.13_2) are now available

    Ok Ok, I applied your suggestions, and the result is: 1) in ddns -> server certificate the Status show always the word updating 2) in ddns -> server certificate the date of expires is 2028/5/5 3) sometimes in the system log appears this messages : Dec 14 22:54:59 modprobe: module...
  18. S

    [Release] Asuswrt-Merlin 384.14 (and 384.13_2) are now available

    Thanks for your answer, but How I can renewing the certificate ? And also .... the kernel error is for the problem of the certificate ? Thanks
  19. S

    [Release] Asuswrt-Merlin 384.14 (and 384.13_2) are now available

    Hi I have an Asus rt-ac86u, after the upgrade from .13 to .14 in the system log I see continuous: Dec 14 20:03:48 inadyn[1873]: Certificate verification error:num=10:certificate has expired:depth=0:/CN=ns1.asuscomm.com Dec 14 20:04:14 kernel: pgd = ffffffc0144b6000 Dec 14 20:04:14 kernel...
  20. S

    [Beta] Asuswrt-Merlin 384.13 Beta is now available

    I’m using the following configuration from two day without problem: 1) rt-86u as router with amtm, diversion, YazFi Wi-Fi + connmon + uidivstat 2) rt-68u as node with lan connection 3) dsl-ac68u as node with Wi-Fi connection. For this device I’m using a beta stock firmware which allows me to use...
Top