Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. E

    GT-AXE11000 hits the FCC

    I'm still awaiting pre-order delivery of my GT-AXE11000 , however the latest Intel driver for my AX210 seems to have some support for 6GHz.
  2. E

    Option to enable 160 mhz Channel Bandwidth on 5ghz-2 Band missing from GT-AX11000 router

    I just noticed you have smart connect enabled. I do not.
  3. E

    Option to enable 160 mhz Channel Bandwidth on 5ghz-2 Band missing from GT-AX11000 router

    I'm currently on 3.0.0.4.384.9566 and have 160MHz enabled on both 5GHz bands. My issues started around 3.0.0.4.384.7979, since all my emails with Asus support are from February 2020. I tried using the software GUI reset without any luck. It was only after I followed those hard reset...
  4. E

    What's the verdict on the RT-AX88U vs RT-AX86U vs GT-AXE11000 if I'm buying today

    Is the GTE-AX11000 even available yet?
  5. E

    Option to enable 160 mhz Channel Bandwidth on 5ghz-2 Band missing from GT-AX11000 router

    You can have 160MHz on both 5GHz bands. You probably just need a hard reset. I had some similar issues with my GT-AX11000 after a few firmware updates. I was about to send it in for warranty repair, but followed the factory recommended procedure to reset and all has been well since then...
  6. E

    GT-AX11000 Deauth_ind XX:XX:XX:XX:XX:XX, status: 0, reason: Class 3 frame received from nonassociated station (7)

    I moved one of my cameras from my 5Ghz network, to the 2.4Ghz network and the majority of my issues resolved. I just don't know why.
  7. E

    ROG Rapture GT-AXE11000

    They're coming. The Intel AX210 and AX211 2x2 AX R2 (6GHz) cards.
  8. E

    GT-AX11000 Deauth_ind XX:XX:XX:XX:XX:XX, status: 0, reason: Class 3 frame received from nonassociated station (7)

    Tim, Thanks for the reply. The cameras stream about 6-7Mbps each. I can adjust the bit rate, but going lower didn't help. All of the cameras connect using Wi-Fi 5 (AC) at 80Mhz on channel 42, and all clients on that radio are ac or ax clients. Camera signal strength are -54, -56, -63. The...
  9. E

    GT-AX11000 Deauth_ind XX:XX:XX:XX:XX:XX, status: 0, reason: Class 3 frame received from nonassociated station (7)

    I have five webcams set up on my GT-AX11000, a mix of D-Link and Amcrest cameras set to constant record to my QNAP TS-1277. Two cameras on my 2.4GHz band and three on one of my 5GHz bands. Problem is that QVR Pro playback shows intermittent frames, not continuous recordings. It's dropping...
  10. E

    New GT-AX11000 Firmware 3.0.0.4.384_9566

  11. E

    Where can I buy a replacement Rapture GT-AX11000 Antenna?

    There are some listed on eBay. https://www.ebay.com/itm/293655217210?ul_noapp=true
  12. E

    RT-AX89X

    I bought an RT-89AX to see if the 10Gbe switch would increase my wireless speed and transfer rate from my TS-1277 over the 2.5 Gb connection in my AX11000. It didn't, and it was actually was much slower since it doesn't have a second 5GHz radio that I can dedicate to certain devices. I'll be...
  13. E

    New GT-AX11000 firmware 3.0.0.4.384_8011

  14. E

    GT-AX11000 New firmware today 3.0.0.4.384_7997

  15. E

    AX11000 keeps resetting itself to original configuration

    I bought a new router as a temporary replacement while I requested the RMA repair from Asus (not an easy process using their website, but that's another issue). Once I was ready to set everything up on the new router , I decided to try to reset the AX11000 one more time. This time not using...
  16. E

    AX11000 keeps resetting itself to original configuration

    I did, except for the user name and password requirement of 8 alphanumeric characters for the SSID and 16 alphanumeric characters when I uploaded new firmware. I just used a different user name and password with a quick set up to initialize all settings, then nvram erase on both firmwares. It...
  17. E

    AX11000 keeps resetting itself to original configuration

    I tried an online RMA without luck. Will have to call support tomorrow. I found this post with a very similar issue on an older RT-N66U, although he is using Merlin firmware. Have to wonder if it has to do with me changing the LAN IP address after updating to the 7979 firmware.
  18. E

    AX11000 keeps resetting itself to original configuration

    Thanks. I tried that but it didn't seem to work. I've tried both a fresh install, and nvram erase on both 6436 and 7979 but every time the router is power cycled it reverts back to the factory settings.
  19. E

    AX11000 keeps resetting itself to original configuration

    Updated to the latest firmware (3.0.0.4.384.7979) about a month ago and have had random disconnects and radio broadcast issues. Last night I manually powered it off so I could get it back online, and when it powered up it was asking me to set it up like it was new (factory reset). I did so...
  20. E

    [ROG RAPTURE GT-AX11000] Experiences & Discussion

    Looks like a newer firmware 3.0.0.4.384_7979 is available through the interface. I couldn't find it on any ASUS support site yet.
View older results
Top