Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. D

    Fork 380.57 HGG-FINAL

    Wrong, that's what the BCM4366 is for. Main CPU is a BCM47094. No Quantenna used, only Broadcom. Please, instead of hitting the reply button immediately, take some time to do some reading, you might confuse other readers. Thanks.
  2. D

    Fork 380.57 HGG-FINAL

    No man it's not. It's what wifi offloader cpus are for, installed in many of the modern routers. They started implementing them only on the 5Ghz band because of higher bandwidth, now those offload cpus are there for 2,4Ghz networks as well. They leave more CPU cycles for TCP/IP. By a rule of...
  3. D

    Fork 380.57 HGG-FINAL

    All I have seen is people saying how easy is to post your work on github, but nobody with enough competencies to get the work done by themselves using Merlin's code. My Caps-locks, insults (if you call them so) and stubborness are no less comparable to the comments made on this thread about...
  4. D

    Fork 380.57 HGG-FINAL

    The fact that some people fears vulnerabilities in his firmwares doesn't mean they're forced to use them. From my point of view users have a choice; they can ask hggomes to release his work on github, but they cannot force him or push him: it's an idiotic way of not minding your own business...
  5. D

    Fork 380.57 HGG-FINAL

    Guys does anybody know why @hggomes has removed all the links? Please don't tell me because of the id***s on this forum.
  6. D

    Man please ignore the idiots on this forum and restore the links! Yours is the reason why many...

    Man please ignore the idiots on this forum and restore the links! Yours is the reason why many of us keep using ASUS routers! THANKS A LOT!
    • DomFel
    • Profile post
  7. D

    Fastest Router for VPN?

    If I run two OpenVPN clients, and I select 'redirect internet traffic - all' which traffic will be redirected to which VPN?
  8. D

    Setup IPTV on a shared LAN port - help!

    Can we do trunks on the Asus???
  9. D

    Setup IPTV on a shared LAN port - help!

    You'll have to use different cables to the switches, when a port is set as VLAN cannot be used for other pourposes. If you can't fix an additional cable, I suggest you to split the cable in 2: if you use only 4 of the 8 wires you'll get a 100mb cable. Use the other 4 to double it. You'll loose...
  10. D

    Country restriction avoidance router VPN advice

    Suggesting HMA! or Buffered. Buffered has higher speeds (useful if you have more than 50mbps WAN), but HMA has got much more servers around the globe and its cheaper.
  11. D

    Overclocking RT-AC56U

    1.0.2.3 shouldn't allow for 800mhz of ram frequency, max should be 666. If you want to go 800mhz you have to update the CFE.
  12. D

    Overclocking RT-AC56U

    Command is nvram set clkfreq=1000,533 then you have to nvram commit then reboot
  13. D

    Two AC56U and double OpenVPN in Dual WAN...

    Having two 56Us here, one is configured with OpenVPN, would like to configure the other one with OpenVPN as well and set it up with dual-wan to the other router, so to share the load between the two 56Us CPUs. The question is: how is the firmware prioritizing the WAN connection? I mean, if I...
  14. D

    Set the router clock with a GPS receiver for under $70

    ASAT can you explain the point of this? Routers usually sync time every 12hrs with NTP, which are servers using ATOMIC CLOCKS. You do understand GPS time is syncronized using EXACTLY THE SAME atomic clocks right?
  15. D

    Overclocking RT-AC56U

    I wonder why the BogoMIPS value at 1100 or 1200mhz doesn't change: it's always 2398.61.
  16. D

    Best router for OpenVPN (using Merlin)

    Overclocked my AC56U to 1200mhz, and stays around 60C of temperature. L2TP, connected to a server 3000 miles away, getting 28mbps. Latency 124ms which is excellent for VoIP, Netflix strems easily in UltraHD. Don't do OpenVPN! L2TP is a lot faster on routers! Go for the AC56U. Unless there will...
  17. D

    Overclocking RT-AC56U

    1.0.2.7 EU on the 56U - 800mhz on the RAM works great!
  18. D

    Asuswrt-Merlin 378.50 is out

    I am unable to go back to stock from Merlin and DDWRT. Any idea what's going on? The only difference since last time is that I changed the CFE, that's it. Tried to do a factory defaults from telnet and gui but nothing. :confused::confused: Solved: Had to revert back to 376 then flash 378...
  19. D

    RT-AC68U as a second and the main router

    http://enterprise.huawei.com/ilink/enenterprise/download/hw_u_149031 Got the 8240, but mine si already in bridge mode.
  20. D

    Overclocking RT-AC56U

    Dude, this is weird. Are you getting 2398 when you check the bogomips??? I get the same result running the router at 1100,800... Uhm, or the bogomips calculation is wrong, or increasing the frequency above 1100 doesn't do much...
Top