What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Search results

  1. Veldkornet

    Using ipset revisited

    Regarding the new ipset 6.x version, I'm still figuring ipset out, and I'm using the sample scripts on the RMerlin wiki here, but I'm not sure yet what I really need to all change to get it working. Could someone point me in the correct direction, or update the wiki? At the moment, this is all...
  2. Veldkornet

    [Release] Asuswrt-Merlin 380.63_2 is now available

    I'm not having any issues FYI. But I do use Adaptive QoS on the 87u. 2231 admin 696 S qosd -i /dev/idpfw -f /tmp/bwdpi/qosd.conf -w eth0 -l br0 -u 253 -b Sent from my iPhone using Tapatalk
  3. Veldkornet

    pixelserv pixelserv - A Better One-pixel Webserver for Adblock

    Just wanted to check if this is normal, see the amount of cls vs req.
  4. Veldkornet

    [Beta] Asuswrt-Merlin 380.63 Beta is now available

    What doesn't work? I have it running on mine? Sent from my iPhone using Tapatalk
  5. Veldkornet

    [Beta] Asuswrt-Merlin 380.63 Beta is now available

    Beta 2 now working great on my AC87U as well. Sent from my iPhone using Tapatalk
  6. Veldkornet

    [Beta] Asuswrt-Merlin 380.63 Beta is now available

    I often have that problem, same firmware installed after uploading a new one. Using Safari works most times for me, then FireFox. Using Chrome seems to hardly ever work. No sure why that would make a difference or if it's just coincidence. Sent from my iPhone using Tapatalk
  7. Veldkornet

    [Beta] Asuswrt-Merlin 380.63 Beta is now available

    I have the same problem on my RT-AC87U. Came from Alpha 2 to Beta 1. Now back on Alpha 2 which is working fine. Alpha 2 Main Page: Beta 1 Main Page: Sent from my iPhone using Tapatalk
  8. Veldkornet

    [Preview] Asuswrt-Merlin 380.63 alpha builds are available

    Looking at the QoS graphs, looks good! I just have 2 questions: 1. What type of traffic is "net control packets"? 2. Would it be possible to rather sort the columns on the right by data usage? So most used is on top and least at the bottom? Sent from my iPhone using Tapatalk
  9. Veldkornet

    Dnscrypt from opendns

    I just removed those scripts and rather put the command in manually at /jffs/scripts/services-start I have 4 in total. 2x IPv4 2x IPv6 Sent from my iPhone using Tapatalk
  10. Veldkornet

    Adblocking on Asus Merlin using Pixelserv?

    For the devices where you don't want the blocking, you could just define a DNS address manually (like 8.8.8.8) instead of the router's IP. Sent from my iPhone using Tapatalk
  11. Veldkornet

    Enable DNSSEC support question

    @RMerlin, could you add the OpenNIC trust anchor as well? I've added it myself for the moment, but ideally it would be nice if it was added with the one from IANA. I believe it's trust-anchor=.,7372,8,2,14a2b8caf58bfaae0bd7c257488a341fcc542f9f88f0b678d620324ce7b55285 Sent from my iPhone...
  12. Veldkornet

    syslog timezone issues

    I added the "export TZ=$(cat /etc/TZ)" to "/opt/etc/profile". Seems to have done the trick.
  13. Veldkornet

    NTP Daemon for ASUSWRT/Merlin

    Assume you will update the tar.gz's eventually as well? Sent from my iPhone using Tapatalk
  14. Veldkornet

    Enable DNSSEC support question

    Aha, thanks! At least I know it's not me ;) I'll let the provider know so that they can work on it. Sent from my iPhone using Tapatalk
  15. Veldkornet

    Enable DNSSEC support question

    Well the DNS resolvers are supposed to support it... how can I confirm though? I'm using: ns1.nl.dns.d0wn.biz 95.85.9.86 2a03:b0c0:0:1010::62:f001 ns2.nl.dns.d0wn.biz 185.83.217.248 2a02:2ca0:64:22::2 And my router clock is supposed to be super accurate now, apparently...
  16. Veldkornet

    Enable DNSSEC support question

    I'm currently having a problem where I can't reach any DNSSEC enabled sites.... Disabling DNSSEC lets me access the domains again. Currently on 380.62_1. For example, doing a dig using my two resolvers manually works fine: dig internet.nl +dnssec +multi +short @95.85.9.86 185.49.141.28 A...
  17. Veldkornet

    Dnscrypt from opendns

    I have another question regarding DNSSEC with DNSCrypt... Before putting DNSCrypt back on, my DNSSEC was working fine. However, since putting DNSCrypt on, I can't reach any DNSSEC enabled sites.... For example, doing a dig using my two DNSCrypt resolvers manually works fine: dig internet.nl...
  18. Veldkornet

    Dnscrypt from opendns

    Thanks, I'll look into this. At the moment I have a work around of just starting them manually via the services-start script.
  19. Veldkornet

    Dnscrypt from opendns

    I was testing this out by manually starting the scripts separately, I found that: /opt/etc/init.d/S09dnscrypt-proxy start (works fine) /opt/etc/init.d/S09dnscrypt-proxy1 start (tells me that dnscrypt-proxy is already running) If I do a ps though, I can only see one running. Also, if I copy the...
  20. Veldkornet

    Entropy Pool

    Hey guys, I was wondering what everyone's thoughts were around the routers default entropy levels? While I understand that my home router is not exactly an enterprise web server or anything, would it not be better to have better entropy on the router? Even if it's just for the SSH keys etc...
Back
Top