What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Search results

  1. e38BimmerFN

    Asus GT-AX11000 problems

    What FW version is everyone using? Happen with older versions of FW?
  2. e38BimmerFN

    UI logs out prematurely if AX-11000 disconnects then re-connects to wifi signal (Wireless Bridge Mode)

    Ok, I'll keep that in mind. Thought I have not seen this behavior on stock FW in regards to the premature logging out when the AX temporarily looses connection then re-connects. Stock FW has never given me higher link rates that's for sure. Stock usually hangs around 1800Mpbs when 2400Mpbs is...
  3. e38BimmerFN

    UI logs out prematurely if AX-11000 disconnects then re-connects to wifi signal (Wireless Bridge Mode)

    So I found out that Merlin is now supporting the GT-AX11000. Thank you Merlin. First time i've seen my AX11000 connect to anything at 2400Mbps with your FW. Stock has never been near this. I need to test 4800Mpbs next. My AX-11000 is in wireless bridge mode working as a client to a AX...
  4. e38BimmerFN

    Having Speed issues with Asus gt-ax11000

    What are you speeds UP and DOWN that you pay for from the ISP? Are you speed testing wired or with a wireless connected device? What FW version are you using?
  5. e38BimmerFN

    Asus GT-AX11000 Not Achieving Full WAN Throughput

    I have same Service here. 1G down and 50 up. Haven't seen a need for QOS.
  6. e38BimmerFN

    Asus ROG Rapture GT-AX11000 Issue - NAT Issue With Two Xbox One Consoles

    Yay. ;)
  7. e38BimmerFN

    Asus GT-AX11000 Not Achieving Full WAN Throughput

    Most QoS doesn't. One 1Gb ISP speeds QoS isn't needed as there is plenty of bandwidth for devices to get data flow from.
  8. e38BimmerFN

    Asus GT-AX11000 Not Achieving Full WAN Throughput

    No I'm currently using 3.0.0.4.384_9165 as it's been mostly stable. However I use my GT in wireless bridge mode for most of my needs. I have seen near 900Mpbs thru the GT in wireless bridge mode with what I have loaded. I see 3.0.0.4.384.9566 is available.
  9. e38BimmerFN

    Release New Orbi 50 series Version 2.5.2.4 and 2.7.0.70 Officially Released

    I haven't installed Voxels FW for last few versions. My RBK50 has been using stock FW. So I went from stock v16 to v70. Factory reset after v70 was loaded and now still on stock v70 in AP Mode. I found one issue however, with the RBS. If two or more LAN switches are daisy chained in between the...
  10. e38BimmerFN

    Voxel Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.1.13.1SF-HW

    Correct. Voxel only develops and build for the 50 series Orbi.
  11. e38BimmerFN

    Release New Orbi 50 series Version 2.5.2.4 and 2.7.0.70 Officially Released

    Set my RBK50 online with v70. Initially the RBS was not seen wired on the RBRs web page. So i did factory reset the RBR and RBS. Wirelessly connected the RBS first, then wired, then it appeared in the RBRs web page correctly. Mines working in AP mode currently. Seems to be working well.
  12. e38BimmerFN

    Voxel Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.2.5SF-HW & v. 9.2.5.2.5.1SF-HW

    Good reason not to use unofficial FW files before they get released officially. There is still room for NG making changes before they officially post them. I would have done a power OFF for 1 minute, then back ON or factory reset of the system after v70 was applied to see if anything changed...
  13. e38BimmerFN

    Kamoj Kamoj add-on V5 for Netgear R7800 X4S and R9000 X10

    I remember Voxel and someone else talking about the fan on the R9000. Voxel did mention his seem to work if he force triggered it. I believe it does. Regardless, just a text edit to the web page noting to users that it's not supported on the R7800 should suffice. Since most of us know that there...
  14. e38BimmerFN

    Kamoj Kamoj add-on V5 for Netgear R7800 X4S and R9000 X10

    We know, however it would be good to inform the users of your add-on on the featured web page that this is only supported on the R9000. ;) Regardless if the code is in the 7800 or not.
  15. e38BimmerFN

    Telco f/w Locked RBK50

    https://community.netgear.com/t5/Orbi/RBR50-vs-RBR50-v2/m-p/1968788/highlight/true#M101697
  16. e38BimmerFN

    Kamoj Kamoj add-on V5 for Netgear R7800 X4S and R9000 X10

    You might add some text to the FAN setting that this feature is only supported on the R9000.
  17. e38BimmerFN

    Voxel Voxel firmware

    What browser are you using? Try clearing out all browser caches. Has a factory reset and setup from scratch been performed since last FW update? Don't reload the saved configuration from file first. Can you change the DNS settings on the R7800 after you complete the setup wizard?
  18. e38BimmerFN

    R7800 data corruption when in Accesspoint mode

    You wouldn't get much benefit out of WiFi 6 or 6E even with you have 350Mb ISP services. Most benefit would be seen with 600Mpbs - 1Gb ISP services. And you have client side supporting devices as well.
  19. e38BimmerFN

    Release New Orbi 50 series Version 2.5.2.4 and 2.7.0.70 Officially Released

    https://kb.netgear.com/26765/Disabled-Features-on-the-Router-when-set-to-AP-Mode
  20. e38BimmerFN

    Release New Orbi 50 series Version 2.5.2.4 and 2.7.0.70 Officially Released

    v2.5.2.4: https://kb.netgear.com/000062319/RBR50-RBS50-Firmware-Version-2-5-2-4 v2.7.0.70: https://kb.netgear.com/000062320/RBR50-RBS50-Firmware-Version-2-7-0-70
Back
Top