Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. mrengles

    Entware-arm - synced with Entware (mips) 2015.09

    Thank you...
  2. mrengles

    Entware-arm - synced with Entware (mips) 2015.09

    Hello Zyxmon, First off I would just like to say "Thank you!" I have Entware-ARM installed onto my Netgear R7000 with DDWRT working great. Currently I have CUPS, Avahi, Python and required Libs installed and setup for an AirPrint server. However iOS printing won't work because CUPS doesn't...
  3. mrengles

    Working Link Aggregation Config RT-AC66U

    @saintdev I wish it was that simple, it's not the switch configuration. It works with other hardware, just can't get the Rt-ac66u aggregation IDs to matchup and work right. I PM-ed BS the main ddwrt dev who was not very helpful on the subject. I'm still working on 802.3ad on my end with ddwrt...
  4. mrengles

    Working Link Aggregation Config RT-AC66U

    Unfortunately it's not Netgear switch set up. It has to do with RT-AC66U 802.3ad settings (or bug). I've tested several different combinations of active-passive and nothing changes.
  5. mrengles

    Working Link Aggregation Config RT-AC66U

    We'll my tested setting above... Doesn't change anything. :( I've PM-ed the two main developers of ddwrt for this router and asked them to look at my posts, keeping my fingers crossed. Thanks everyone for the help! Should I try to contact the linux bond driver developers, or not even...
  6. mrengles

    Working Link Aggregation Config RT-AC66U

    @RMerlin Are you using newer Broadcom drivers then ddwrt at the moment? @ AnyoneElseWhoCares Well I have been reading online there's a bug in the Linux Kernel 3.10.x that allows ARP monitoring in 802.3ad mode, which should not be the case. The current builds of dd-wrt are based on 3.10.25...
  7. mrengles

    Working Link Aggregation Config RT-AC66U

    I was shocked myself. It's cheap but you have no control over the trunk. I'm pretty sure it only supports one bond, but can't say for sure only tested with one setup. I tried connecting the gs108 but it did not see the bond on the rtac66u as expected
  8. mrengles

    Working Link Aggregation Config RT-AC66U

    The GS108 definitely supports 802.3ad, same as the Airport, its all setup automatically without need to configure the firmware though. http://www.netgear.com/images/GS105v3_GS108v3_DS_27Apr1118-4903.pdf
  9. mrengles

    Working Link Aggregation Config RT-AC66U

    Only thing i can find... Both en0 and en1 show "No Partner" and when selected says... The port on the switch that the device is connected to doesn't seem to have 802.3ad Link Aggregation enabled. I'm still going through the logs to find more detail. If I connect the Mac Pro to my older...
  10. mrengles

    Working Link Aggregation Config RT-AC66U

    I haven't tested my netgear switch yet (it's at my office but has worked with every other LAG bond I through at it.), I'm trying to setup with a MacPro with dual GigE intel Ethernet. From some earlier posts another user setup his Mac Pro without issue.
  11. mrengles

    Working Link Aggregation Config RT-AC66U

    Regardless of how I add the slaves still have the same issues. I'm still searching the web for a solution...
  12. mrengles

    Working Link Aggregation Config RT-AC66U

    @KAD I've got some good and bad new. Lets start with the good news first, I'm now able to echo > vlan3 & vlan4 into bond0. its was the fact that I have been bringing "up" the vlans priors to launching the bonding module. The below scripts gets everything setup and in place. # Step 1...
  13. mrengles

    Working Link Aggregation Config RT-AC66U

    Maybe thats my problem :confused: Once I get home i'll give it another look. I can't remember off the top-of-my-head if I tried this or not. In part of my makeshift script the first two commands "UP" vlan3 & 4.
  14. mrengles

    Working Link Aggregation Config RT-AC66U

    Yes, made a few quick edits. I keep reading online, that others getting write errors when adding slaves, have another bond config somewhere already active in the system, like with redhat, gentoo and other distros.. I've looked all over /etc and can't find any other files containing default bond...
  15. mrengles

    Working Link Aggregation Config RT-AC66U

    # cat /sys/class/net/bond0/bonding/slaves vlan3 vlan4 I'm not home right not so I really can't make any changes to the router without loosing my connection, however I want to see if bringing up the bonding driver enables "up" vlan3 and vlan4. maybe I should try to bring up vlan3 and...
  16. mrengles

    Working Link Aggregation Config RT-AC66U

    KAD Hope you enjoyed your New Years. I finally recovered from the night of partying and figured to give bonding on the RT-AC66U another go ahead. For whatever reason. I can't get vlan3 and vlan4 to add to the interface bond0 when using the echo method. I'v tried both before and after the...
  17. mrengles

    Working Link Aggregation Config RT-AC66U

    KAD My settings now looks like this with your recommended changes: Setup vlans with ssh/telnet command prompt. nvram set vlan1ports="1 2 8*" nvram set vlan2ports="0 8u" nvram set vlan3ports="3 8t" nvram set vlan4ports="4 8t" nvram set port5vlans="1 2 3 4 16" nvram set port0vlans="2" nvram set...
  18. mrengles

    Working Link Aggregation Config RT-AC66U

    Thanks KAD your a super hero! I'll get working on this tomorrow, tonight I have a New Years Party to attend. Be safe, have fun, and Thanks again! I'll let you know if I have any success. Gratitude, Robert (Mrengles)
  19. mrengles

    Working Link Aggregation Config RT-AC66U

    Bonding with 802.3ad and dd-wrt Hello KAD Firstly, I would like to say thank you, and good job with your LinkAgg script. Secondly apologize for posting about dd-wrt in the AsusWRT-Merlin section of the SmallNetBuilder forum. I have been following this thread, and decided to give 802.3ad...
Top