Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. R

    Really disappointed with AiMesh, I switched to something else

    Well, after trying out AiMesh for sometime. I tired to work with engineers in ASUS in order to make it stable, but finally I cannot make it stable in my home environment. The last firmware version that I have tried is 3.0.0.4.384.45149. It is time for me to give up and try out something...
  2. R

    AiMesh firmware release 3.0.0.4.384_32799 not stable

    I just upgraded to 3.0.0.4.384.45149, this version is much more stable than 3.0.0.4.384_32799 Good job!
  3. R

    AiMesh firmware release 3.0.0.4.384_32799 not stable

    Well, after testing some time after clean upgrade (factory reset and setup everything again), I discovered a few problems: 1. Roaming kick off and reconnect to same node. Well, I found that the behavior is not happens always, it may disappeared after rebooting the whole system. So the...
  4. R

    AiMesh firmware release 3.0.0.4.384_32799 not stable

    I send again via web UI and to your e-mail as well.
  5. R

    AiMesh firmware release 3.0.0.4.384_32799 not stable

    It seems new firmware has some regression problems that has been fixed some time ago....... AiMesh system: Main router in AP mode: RT-AC88U Nodes: RT-AC88U and RT-AC86U Setup details: 1. Clean upgrade with factory reset and setup everything from scratch 2. MAC address filter enabled Problems...
  6. R

    Aimesh issue with 3.0.0.4.384.21140

    I have found stability issue for 21045 as well. And because I am a bit busy these few weeks, I just rollback to 9.0.0.4_384_631 for simplicity. The symptom that I found is the Wifi is still connecting but suddenly it cannot access the Internet, with the Wifi still reported to have full signal...
  7. R

    [Beta-release] AiMesh Phase2 beta test for RT-AC68U and first beta for BlueCave

    Wilson, I have helped to stabilize the AiMesh firmware in the past few months. So if you start to work on new features for devices: RT-AC88U and RT-AC86U, I can help to test with detailed bug reports. I have AiMesh running in 3 nodes: 2x88U and 1x86U.
  8. R

    ASUS Wrt RT-AC68U Firmware version 3.0.0.4.384.21045

    I have a AiMesh setup with 3 nodes: RT-AC88UAP, RT-AC88U node and RT-AC86U node. I tried to upgrade latest release version 3.0.0.4.384.21045 and figured out that there are many case that the Wifi is good and connected but suddenly cannot ping my router/AP/nodes, Wifi still connected properly...
  9. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.20308 for All Supported Products

    It seems the RT-AC68U and RT-AC86U has the 648 version, while the RT-AC88U still have very old firmware version in the ASUS site.
  10. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.20308 for All Supported Products

    Guest Wifi only present in main router/ap, not AiMesh nodes
  11. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.20308 for All Supported Products

    I have some procedures that can help the AiMesh to operate more stable. After changing any settings, I just reboot the nodes first, then followed by rebooting the main router/ap.
  12. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.20308 for All Supported Products

    Mainly working on Wifi dropping and MAC address filtering problems.
  13. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.20308 for All Supported Products

    Well, I have been helping to test out several beta version already. Ha Ha.
  14. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.20308 for All Supported Products

    I think they need some more time to put up a stable new release, I am still working with them to resolve some stability issue after enabling MAC address filtering.
  15. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.20308 for All Supported Products

    Since RT-AC68U did not supports Smart Connect, it just not working on 68U.
  16. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.20308 for All Supported Products

    Enabling UI is not good anyway, since a subset of settings will sync from main router to nodes, those settings that you changed manually may be overwritten during the sync.
  17. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.20308 for All Supported Products

    Yes, less than 10, around 5 in my test.
  18. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.20308 for All Supported Products

    I already used the command wifite -mac in which it will randomize the mac address, still no luck. Will try something more and see how it goes.
  19. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.20308 for All Supported Products

    I used 60 seconds, but seems once the router locks up, it will not release until reboot.
  20. R

    [Official Release] AiMesh Firmware v3.0.0.4.384.20308 for All Supported Products

    Tried to use wifite and hack my nodes/router with multiple methods, still no luck. I think with WPS on, the nodes/routers are safe except the hacker has physical access to your routers/nodes.
Top