Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. D

    Diversion AMTM / Diversion stopped working (USB Drive?)

    SSD vs. Flash discussion not withstanding, I think I may have more basic issues. I found a 1 TB SSD that didn't have anything I needed on it (I'll move to a smaller SSD if I find this works). I hooked up and tried to format it and saw this information below. It doesn't seem to recognize the...
  2. D

    Diversion AMTM / Diversion stopped working (USB Drive?)

    I thought about that, though the price seemed 4-5x more -- if I had to replace the flash drive every year or two, that'd still be cheaper probably? I might have an old SSD somewhere that I can try. But given I see similar things with different USB sticks, would you expect the port to work with...
  3. D

    Diversion AMTM / Diversion stopped working (USB Drive?)

    I saw something that said ext4 might not be working, so I tried with ext3 and managed to capture the message. I'm not sure why it's saying the drive is .1 GB. And it doesn't appear to detect /dev/sda1. Dancing Lemur Formatting sda SanDisk Corporation Anisha (0.1 GB) now...
  4. D

    Diversion AMTM / Diversion stopped working (USB Drive?)

    I've been running AMTM/Diversion for years. Once I get it installed, I let it run and just make it sure it's updated. A little while ago, it stopped working. I saw a USB drive not recognized error and thought the USB drive wasn't working. But that seemed to be the case with a different USB...
  5. D

    Wireless Printer setup

    Maybe I jumped the gun a bit. I was able to discover and print from an iPad connected to the node; the printer is connected to the main router. This didn't work yesterday when I first hooked things up. It's almost as if it took a few hours for the presence of the printer to propagate across...
  6. D

    Wireless Printer setup

    Hi, I have an ASUS mesh network system -- two RT-AC3100s running the latest Merlin and AIMesh. I'm using SmartConnect to have a single SSID for both 2.4 Ghz and 5 Ghz, connecting to the best node in the mesh network. While I'm running Merlin, I think this is a more general question, so I'm...
  7. D

    uiDivStats Both pCPUS to 100% and many processes backed up

    I closed the ssh session (or rather it closed when I rebooted), so I don't have that processes list anymore. They weren't really stale though. I had just re-enabled diversion after a few days of it being disabled -- this thread led me to believe that it was uiDivStats that was causing the 100%...
  8. D

    uiDivStats Both pCPUS to 100% and many processes backed up

    Did this ever get figured out? I was struggling with my RT-AC3100 running Merlin hitting 100% CPU usage (on both CPUs). Certain devices connected stopped being able to access the network. I wasn't sure if it was due to some wireless radio configuration or something else. I saw the...
  9. D

    Device dropping from the network

    Thanks. I'll try that. For some reason when I first switched over to AIMesh on Merlin, I thought I saw a recommendation to keep stock FW on the nodes. But it was a while ago and I could be mistaken. I'll definitely switch the node to Merlin -- running Diversion is a key requirement for me...
  10. D

    Device dropping from the network

    I have a RT-AC3100 running the latest Merlin FW (with another RT-AC3100 acting as a AIMesh node running the latest stock FW) At some point, I started seeing a device (I notice it on my laptop but I think it's happened on others), slowly start to stop being able to access the network. At...
  11. D

    Issues with RP-AC68U repeater

    This will be very useful. I had to put this project aside for the moment. But... I was also just told by ASUS that there's a chipset bug in the RT-AC3100. They did not tell me what it is or if it causes the issues I see (it was implied). They said that they'd RMA my router even though it's...
  12. D

    Issues with RP-AC68U repeater

    I have... but a lot of it goes above my head as I'm not an expert here. I just know enough to probably cause more problems for myself. :( With these messages, my repeater enters a state where it connects to the router but doesn't move to the static IP assigned to it. Nor does it or any...
  13. D

    Issues with RP-AC68U repeater

    Anyone know what these messages mean? ASUS Tech Support never explained them: *** "dnsmasq-dhcp[529]: DHCP packet received on wl1-vxd which has no address" *** "kernel: br0: received packet on wl0-vxd with own address as source address"
  14. D

    Diversion Diversion - the Router Ad-Blocker

    I spoke too soon. The repeater restarts some daemons and gets into a state where it may connect to the router but cannot access the Internet. I can (sometimes) see the repeater on my internal network (using the device discovery tool -- the webpage is not accessible that way) and it remains...
  15. D

    Diversion Diversion - the Router Ad-Blocker

    Okay, using .2.1 for the router seemed to work. I was able to access the internet via devices connecting to the repeater. (This did not work when I used .1.100 for the router -- not sure why) The repeater was getting assigned a random .2.x address that was hard to find so I tried statically...
  16. D

    Issues with RP-AC68U repeater

    (Apologies fro the cross-post -- this might be a better place for this) I have a RT-AC3100 that's running Merlin and operating as a router. I'm running Diversion on it after having run AB solution previously. I also have a RP-AC68U repeater that's running the latest stock firmware (as I don't...
  17. D

    Diversion Diversion - the Router Ad-Blocker

    This may be a Diversion question or Merlin. I'm new to the forum. I have a RT-AC3100 that's running Merlin and operating as a router. I'm running Diversion on it after having run AB solution previously. I also have a RP-AC68U repeater that's running the latest stock firmware (as I don't...
Top