Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. R

    R9000 with Voxel's Custom firmware Unable to connect via TUN

    Did you check that dynamic dns is still working? I.e does fudgie.myvnc.com still resolve to the actual public IP-address that your router has?
  2. R

    Voxel Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.2.33SF-HW

    out of curiosity, is the issue with the OpenVPN client (your router connects to some VPN provider) or with the OpenVPN server? (for instance you phone connects to your router). In case of the latter, did you install a new .opvn profile on your phone as well after upgrade? (.32 moves from...
  3. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    guess I could have seen that by looking at your log-files. the difference seems to be in "AdGuard Home: Install OK. WAN is UP" vs "AdGuard Home: Install FAILED. WAN is UP" I think because you are not using USB, it really needs to download the install file again after each reboot. I can only...
  4. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    You need to remove the leading / from /kamoj-addon_240405..... (now you say the files are in / instead of /tmp/mnt/sda1) Or use the full path
  5. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    Are you perhaps using Entware on your USB stick? I had to lower the sleep in autorun/scripts/post-mount.sh I had some kind of race condition between Entware script remounting a lot of folders from the usb-stick, vs the AGH starting up. Lowering the sleep from 30 to 20 solved by issue.
  6. R

    Open VPN Configuration File Question

    The generation of the openvpn certificate happens solely on the router. when openvpn server is started for the first time (or perhaps started for the first time after factory defaults), it sees that there is not yet a certificate stored in the flash memory -> it then generates certificate and...
  7. R

    Open VPN Configuration File Question

    On R7800 this certificate is generated on the router and stored somewhere in a flash partition. I assume R9000 will do the same. (you could check the contents of /etc/init.d/openvpn. This is the startup script for OpenVPN server on R7800. It has some functions for extracting and regenerating...
  8. R

    Kamoj Kamoj add-on V5 for Netgear R7800 X4S and R9000 X10

    I also use IPvanish. The configs I downloaded (from https://configs.ipvanish.com/configs/) do not even contain that Certificate part -> I needed to download "ca.ipvanish.com.crt" from their website aswell and put it on the router in the folder /etc/openvpn/config/client/ (in addition to removing...
  9. R

    Voxel Custom firmware build for R9000/R8900 v. 1.0.4.72HF

    I guess I overlooked the fact that you mentioned everything works when traveling. So basically the VPN client is still set to active, but for some reason cannot connect? And thus the phone/openvpn client is blocking direct access to internet? in that case, the OpenVPN client is doing what it...
  10. R

    Voxel Custom firmware build for R9000/R8900 v. 1.0.4.72HF

    So you want to block access from WiFi to the OpenVPN server on your router, so that your OpenVPN client cannot connect and thus will fall back to using WiFi directly?? Don't think it is very secure if the OpenVPN client would behave in that way. Why not configure this option "Clients will use...
  11. R

    Two R7450 Routers w/ separate SSID on one Network

    I don't have experience with Netgear in AccessPoint mode, but I'd be very surprised if router1 would push any WiFi info to router2. Router 1 wouldn't even know there is an access point connected (it could just as well be a switch). So I think it is fine to use a different SSID. and for the...
  12. R

    Two R7450 Routers w/ separate SSID on one Network

    The way it now seems to be configured is causing your traffic from the Office network to be NATted twice when going to the internet. Don't think it would be causing the zoom / wifi disconnects though. But, do you really require the both locations to be also in different subnets? (perhaps from...
  13. R

    R7800 lost 5GHz SSID :(

    Which channel is your 5GHz Wifi on? I vaguely recall a similar thing with my R7800 a few years ago, when I was using one of the DFS channels. Since I've switched back to one of the standard 5GHz channels, I never had this issue again.
  14. R

    help with iptables / routing

    Isn't just using the port-forwarding settings in the GUI adding similar iptables rules? What would be the benefit of using plain iptables instead of the GUI settings? And I think it won't work without some form of VPN bypassing... Traffic to the server in LAN will arrive via brwan from the ISP...
  15. R

    WiFi device can't connect to my 2.4GHz SSID

    Maybe the kobo doesn't support WPA2? so then you need to configure your 2.4 GHz network to use WPA-PSK [TKIP] + WPA2-PSK [AES] ??
  16. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    I hadn't tried those, but I just did. removed my sleep again. Increased the first setting from 29 to 39 and rebooted -> no AGH Increased the 2nd setting from 11 to 21 and rebooted -> no AGH Increased both again with 10 and rebooted -> no AGH. Put the sleep back in and rebooted -> AGH works ok...
  17. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    Spent some time looking into this. My guess is that somehow on my R7800, the script /usr/bin/addon_adguard.sh runs too early in the boot process. I added some logging to the commands that are supposed to create some folders at the beginning of the script: these always fail with "mkdir: cannot...
  18. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    I'm running the latest version: v0.107.34 The issue only happens at boot of the router. It starts AGH with the default config. And when I then restart AGH (either by pressing restore config from USB or by disabling and re-enabling it) then it immediately works.
  19. R

    Kamoj Kamoj Addon 5.5 Beta for Netgear R7800/R8900/R9000 with Voxel FW

    just installed 5.5b32 and it still has some bug that is affecting me, but never took the time to figure it out. Issue: After reboot of the router, AdGuardHome is not working. Process is running, but can't access the GUI via 8080 and also DNS lookups aren't working. Looking at the log-file, I...
  20. R

    Voxel [R7800] Way to route traffic using the subdomain used?

    One option I can think of: Install Entware and then use nginx, for instance like described here: https://stackoverflow.com/a/40135151 Question is if the entware package of nginxm, nginx-ssl and nginx-extras have the required plugins. Otherwise you may have to compile them yourself.
Top