Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. B

    Solved GT-AXE16000 port forwarding for Synology NAS

    Synology management port is changed to 16001, I check my NAS settings on the office and there it was 12001 and from there it came to change it. Changed back to Synolgy's original port 5001 I found the issue, it was the Synology's router configuration, my mind it was stuck on the Synology...
  2. B

    Solved GT-AXE16000 port forwarding for Synology NAS

    Hi all, I have a Synology DS220+ and it's setup with DDNS, done all the port forwarding rules on the NAS also on my GT-AXE16000. The first 30-40 minutes is working just fine, I can reach the NAS from everywhere, after is simply not reachable just randomly. I checked if the ports are open, and...
  3. B

    Solved Samsung Galaxy S24 Ultra Doesn't Detect 6Ghz Band on Wifi Router

    I got today an answer from Samsung support and they say that at the moment is not implemented in my region the 6Ghz signal, the Wifi 6E. Short long asnwer "We are working on it and it will be released an update for it" what is disappointing because the 6GHz signal is adopted in EU also in...
  4. B

    Solved Samsung Galaxy S24 Ultra Doesn't Detect 6Ghz Band on Wifi Router

    I tried this with my S22 last year and it didn't work, also I give a try to my S24 and the same nothing happens. I did reset all the Wi-Fi settings no luck, basically I tried everything what I could find on the internet. Luckily, my 5Ghz 160 Mhz (Wifi6) works flawless just I can't get to work...
  5. B

    Solved Samsung Galaxy S24 Ultra Doesn't Detect 6Ghz Band on Wifi Router

    I have an S22 and S24 ultra, non of these see the 6GHz signal, I tried all the channel one by one. In the other hand my wife iPhone 15 Pro Max see and can connect to every channel I changed the 6GHz signal.
  6. B

    Release Asuswrt-Merlin 3004.388.5 is now available

    I had 3004.388.4, so far I have done the following: 1. Removed USB from GUI and unplugged after 2. Restart the router 3. When I tried to flash from my main PC, same issue 4. Took my wife MacBook, and it was smooth flashing from that point 5. Also, get the same message to manually reboot the...
  7. B

    Release Asuswrt-Merlin 3004.388.5 is now available

    Cache cleared, but is the same, after I click to upload the firmware is displaying "Please wait, Applying settings..." couple of seconds and back straight to the login page.
  8. B

    Release Asuswrt-Merlin 3004.388.5 is now available

    Hi all, I have a tricky issue with updating the firmware. I have a GT-AXE16000 and when I try to upload the new firmware, every time is't jumping back to router login screen. I did try different browser or pc is the same. Any ideas what it could be the issue?
  9. B

    Kamoj Kamoj Add-on Beta testing II

    Hello Kamoj, Thanks for guide, only modification I have done is I disabled the Aegis cron job and since then 7 days 23 hours is AdGuard is running without any issues.
  10. B

    Kamoj Kamoj Add-on Beta testing II

    Hi guys, I have some issue with AdguardHome after 24 hours I restarted my router some applications on android taking long to load or to load the pictures like in the twitter. If I restart the router I have no issue for another 24 hour, but after it's starting again. What I tried so far is...
  11. B

    Kamoj Kamoj Add-on Beta testing

    @kamoj Thankfully for your guides, since version V5.4b20 I don’t have any issues with the addon or the router! Apologises for the very late response, but I have been busy with my little girl and I don’t have the time to sit down and to reply. All my issues been resolved by disabling the “Save...
  12. B

    Kamoj Kamoj Add-on Beta testing

    See below:
  13. B

    Kamoj Kamoj Add-on Beta testing

    See below Kamoj post
  14. B

    Voxel Custom firmware build for R7800 v. 1.0.2.82SF & v. 1.0.2.82.1SF & v. 1.0.2.82.2SF

    Hey Voxel, If you are using the r7800 in AP mode, what router are you using? Of course if you don't mind sharing with us. I'm asking because I'm still a newbie in the routing network stuff. Regards,
  15. B

    Kamoj Kamoj Add-on Beta testing

    Kamoj thanks for you patience, I will follow your guide and will report back to you. I don't use openvpn/wireguard because it's a bit slow, so I cannot say anything about it. DNSCrypt 2 I didn't used since you added Aguard Home, but I didn't have any problem with it till then, I need to think...
  16. B

    Kamoj Kamoj Add-on Beta testing

    Back with new logs, I disabled Adguard home and still I see high cpu usage. FW Voxel V1.0.2.82.1SF + Kamoj Add-on V5.4b20 + Aegis (default config) Please see attached. Regards,
  17. B

    Kamoj Kamoj Add-on Beta testing

    Sorry kamoj, I forgot to mention FW + addon, FW Voxel V1.0.2.82.1SF + Kamoj Add-on V5.4b20. I was meaning "Kamoj Menu->DNS Privacy/Ad-Blocking->DNS Filter/Encryption" and I switched to ⚠ None - Not recommended and back to Adguard Home. Nope, however I was using Adguard home all the time, but...
  18. B

    Kamoj Kamoj Add-on Beta testing

    Hey Kamoj, I'm back with the issue of "Out of memory" at this time not the Adguard Home caused the issue but leaded to crash the adguard, all of this resulted temporary internet disconection till I restarted the Adguard home from the interface menu. After this I obseved high CPU usage, I tried...
  19. B

    Kamoj Kamoj Add-on Beta testing

    I can't because the log stopped for some reason and it didn't log a half a day before crash... I reinstalled Voxel V1.0.2.82SF + kamoj v5.4b17 just reconfiguring everything and see if it's happening again. Anyway, it's possible to move the Adguard log to USB like the system-logs?
  20. B

    Kamoj Kamoj Add-on Beta testing

    Back again with a new log. It happend again that Adguard killed the internet. Asap I checked add-on Router Information page and I had 94.8% CPU usage, ram usage 160MB, but on the Adguard Home line it was stated "Is installed but not running, but is on in nvram" On the add-on DNS...
Top