What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Search results

  1. jmat

    Wake on WAN

    Hello, personally I have always worked with the router's own OpenVPN to connect remotely either with the router itself, with Wake on Lan or with my work computer network without having to open any port on the router for security reasons, as I explain. in my two previous posts, and it works great...
  2. jmat

    Wake on WAN

    As an alternative solution, I seem to remember that if you use a VPN from the Asus router to connect to the Asus application on your mobile, Wake on Lan DOES work through Network Tools simply using the "specific MAC" of the PC/PCs you want to boot without this MAC being registered as permanent...
  3. jmat

    Wake on WAN

    Just in case, if you are using Asus DDNS in Wake on Lan or OpenVPN, also check that everything is correct after any firmware update. In the "Forced update interval (in days)" option I usually indicate "1" and then apply to prevent the www.asus.com server from taking a long time to replicate any...
  4. jmat

    Wake on WAN

    Hello, Kurai, I would just like to tell you in case this helps, that with version 3004.388.5 on the RT-AX58U and RT-AX86U routers the command in the "services-start" file: arp -i br0 -s 192.168.xx. 254 ff:ff:ff:ff:ff:ff, executed as: chmod +x /jffs/scripts/services-start, and with the same IP...
  5. jmat

    Wake on WAN

    After several days of monitoring the ARP table behavior of the RT-AX58U and RT-AX86U routers with the new firmware version 388.4 alpha 1, it can be said that at least on these routers, permanent ARPs are functioning normally again. Hopefully, the same will occur in the upcoming firmware updates...
  6. jmat

    Wake on WAN

    Thank you, Kyjiep, for your good news. Up until now, I have been using version 388.1 on both routers, with the solution we found some time ago, as it seemed to be the most stable one for maintaining permanent entries in the ARP (specifically, in my case, the broadcast address) after the usual...
  7. jmat

    Release Asuswrt-Merlin 388.2 is now available for select models

    PS: Although at least in my case I think the Wi-Fi outages are more related to having the <Smart Connect> option enabled, a problem that did not occur to me in versions prior to 388.2
  8. jmat

    Release Asuswrt-Merlin 388.2 is now available for select models

    It is possible that the USB disk is causing you a problem. In my case, I mounted a USB in an AX86U only for swap, and it caught my attention that the ram level had risen to almost 100% of a total of 1024 MB, and on the other hand I began to have cuts in the Wi-Fi signal, although I did not...
  9. jmat

    Wake on WAN

    PS: Finally, some time after the 388.2_2 update, the permanent macs disappeared again as per the trick found above, so I'm staying on 388.2 until the issue is resolved, hoping it won't take long. All the best,
  10. jmat

    Wake on WAN

    Thank you, I think it's great news to start the day. Last night I did the 388.2.2 update on AX86U and the permanent arps are maintained with no problem with the method I am using via VPN. Good morning, until another time. All the best,
  11. jmat

    Wake on WAN

    *I meant, connecting to RDP using either the local network or the ZeroTier network.
  12. jmat

    Wake on WAN

    "Let's see, if it were just up to me, I would have an even easier option than the one you propose through SSH, by simply using the Asus router's mobile application through the Wake-on-Lan option in Network Tools, since both the application and said tool work perfectly on the local network...
  13. jmat

    Wake on WAN

    We agree on that, I always do WOL remotely by previously connecting to a VPN on the router configured only for the LAN without opening any external port on the router as if we were on a local network. Then I also connect locally to the PCs and when I finish the connection, I disconnect the VPN...
  14. jmat

    Wake on WAN

    Thank you, it seems like a joke, but in that case I also cannot promise that the next routers I buy for myself and for other people I collaborate with will be from the Asus brand, and in fact I am already studying other alternatives with a more transparent and secure WOL function, especially for...
  15. jmat

    Wake on WAN

    Hi, I'm glad you finally found a way to make WOL work for your setup. In my case, I prefer to continue using the method we found with the broadcast IPs and permanent MAC entries in the ARP table because it works very well for my installation with several PCs operating as a local network through...
  16. jmat

    Wake on WAN

    Hi, I just wanted to confirm that the IPs with permanent MAC addresses configured using our procedure for the AX86U router, and also for the AX58U model, at least in my case, remain active in the ARP table as days go by according to the procedure I have already reported in this forum. This makes...
  17. jmat

    Wake on WAN

    Well, we don't know how wake.sh works, but a bit later wake on lan failed on my test installation and I had to put the file back, so I feel a bit more useful for now. That's probably why they call it "Magic Packet", hehe...
  18. jmat

    Wake on WAN

    Hi, you seem to be right because I have deleted the wake.sh file from my testing installation and nothing has happened, wake on lan is still working fine. So, I thank you for showing me something new and stop doing something useless, hehe...
  19. jmat

    Wake on WAN

    I'm sorry I'm having some problems with the translator. Anyway, regarding what you are telling me, it is possible that it is as you say, and that is why I told you that perhaps a technician could explain it to us a bit. The only thing I can tell you is that, whether that file works or not, the...
  20. jmat

    Wake on WAN

    Sorry, It looks like we had a goblin asking for money in the last word of the wake.sh script, since obviously the word should be "done" instead of "donate". Just in case, I am attaching the two original files with ".txt" extension added. Regards,
Back
Top