What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Search results

  1. W

    AiMesh AP connecting to router with ethernet backhaul on another node

    @bennor thank you. Actually alot of the information I've found is with Aimesh router. My setting is Aimesh AP. Not Aimesh router. Thats why I was asking under Aimesh AP where all the nodes are using the same 192.168.1.x where DHCP server is by router "A". Router “A” port0 LAN connect to Aimesh...
  2. W

    AiMesh AP connecting to router with ethernet backhaul on another node

    Guys, my home has a router. I called it Router “A”. My Aimesh AP is the key one that creates the Aimesh. Aimesh AP is connected to Router “A”. I’m not setting an Aimesh Router but an Aimesh AP. After the Aimesh AP is setup (In Aimesh, you need to have a main one which can be setup as Aimesh...
  3. W

    AiMesh AP connecting to router with ethernet backhaul on another node

    Ie AX88U is access point. It is not setup to be an Aimesh router but Aimesh AP. The IP addresses comes from the DHCP of router “A”.
  4. W

    AiMesh AP connecting to router with ethernet backhaul on another node

    Thank you @bbunge . AX88U is Aimesh AP. AX86U need to be a node but need to connect via router “A”. All are using the same 192.168.1.x where x is from 2 to 254
  5. W

    AiMesh AP connecting to router with ethernet backhaul on another node

    Dear Expert, My Aimesh AP Ax88U is connected to a router. Let’s call the router “A”. My another Asus unit AX86U cannot connect to Aimesh AP via wireless to form the node. The wifi beam seems weak. However, it can connect to the router”A”. Can this be used to form the Aimesh network using...
  6. W

    388.8.4 release seem to have cause AIMESH stability issue

    Thank you @Tech9 , if AIMESH + scheduler cannot work properly (temporary I will continue to use the work-around I have which haven't saw any disconnection) officially and its a known issue, the next step would be to use a wifi smart plug to turn on/off the power of routers then...
  7. W

    388.8.4 release seem to have cause AIMESH stability issue

    Hi @Tech9, I dont have ethernet backhaul at lvl3/lvl4. If I have, I can setup similar wireless AP with similar SSID and then setup them to have different channels so that they dont interfere with each other within. Unfortunately, I dont have such ethernet backhaul . Each level of my house...
  8. W

    388.8.4 release seem to have cause AIMESH stability issue

    Hi @Tech9 , my AIMESH router is at level1 and AIMESH node is at level3. Luckily their radio beam can meet. So the AIMESH connection is indicating "GREAT". I setup AIMESH is just to have a single SSID connected while I move from lvl3/4 to lvl1/2. Level1 and 2 covered by AIMESH router and level 3...
  9. W

    388.8.4 release seem to have cause AIMESH stability issue

    Thank you @dosborne . I have 4 children. One of the node is placed closer to the bedroom. I wanted to reduce radiation during night time when no one uses the wifi. Thats the main reason.
  10. W

    388.8.4 release seem to have cause AIMESH stability issue

    Thank you @Piotrek . My AIMESH router and node are at different storey of my house. Unfortunately, cannot connect via ethernet backhaul. I would love to do it this way too. Is this a "known issue" which seem most of the seniors aware? I only started using AIMESH for 1-2yrs. Previously, higher...
  11. W

    388.8.4 release seem to have cause AIMESH stability issue

    Update: With Wifi scheduler turn on, I've setup such that when the Wifi turn on at timeX, I setup the AIMESH router to do a system reboot at timeX + 10min. For quite a few days, no problem. If you dont do that, it seems after the scheduler turn on the Wifi to do the AIMESH connection, it becomes...
  12. W

    388.8.4 release seem to have cause AIMESH stability issue

    Ok Squall, but wifi scheduler is very important feature. When we sleep, we dont on it. AIMESH is also important feature. It allow us to seamlessly connected with the same SSID. It is unfortunate that we cannot do a "AIMESH Optimization" after the wifi turn back to ON. Temporary, if my wifi turn...
  13. W

    388.8.4 release seem to have cause AIMESH stability issue

    All, 1. AIMESH ROUTER: AX86U_PRO (Dual band) => 388.8.4 release merlin firmware 2. AIMESH NODE: AX11000 (Trid Band) => ASUS factory latest firmware 3.0.0.4.388_24394 3. Wifi scheduler is on. Day time on and night time off to avoid unwanted radiation. Less concern about power...
  14. W

    388.8.4 release seem to have cause AIMESH stability issue

    Wrong... I saw it is:- ASUS GT-AX11000 Firmware version 3.0.0.4.388_24394 Version 3.0.0.4.388_24394 70.72 MB 2024/11/13 Please unzip the firmware file, and then verify the checksum. SHA256: 377915f7d7eb85c324e3e316cebdb799d4c9a6ba304ce905a8a000cc525aa5d0 1. Strengthened input validation and...
  15. W

    388.8.4 release seem to have cause AIMESH stability issue

    If I go ASUS website, the AX11000 firmware was like year 2021 ... https://www.asus.com/us/supportonly/gt-ax11000/helpdesk_download/
  16. W

    388.8.4 release seem to have cause AIMESH stability issue

    Hi Ripshod, when I upgrade the firmware, the AIMESH node and router upgrade to both 388.8.4. It causes frequent disconnection and need the node to reboot before it becomes stable. I downgrade back to both NODE (AX11000) and ROUTER (AX86U_PRO) to 388.8.2 and it is working well for the past few...
  17. W

    388.8.4 release seem to have cause AIMESH stability issue

    I've further update this issue here:- https://www.snbforums.com/threads/asuswrt-merlin-3004-388-8_4-is-now-available.92938/post-936760
  18. W

    388.8.4 release seem to have cause AIMESH stability issue

    Dear Sir/Mdm, Recently I've updated the latest firmware 388.8.4 from 388.8.2. After the upgrade, I frequently find AX86U_PRO being the main AIMESH router keep disconnecting with my AIMESH node AX11000. AX86U_PRO is not a triband. AX11000 is a triband. It has no issue with the connection until...
  19. W

    Wireless channel for Aimesh Node

    Yes, AX86U_PRO is dual band but AX11000 is tri-band. AX86U_PRO is AIMESH router AX11000 is AIMESH node At the AIMESH router (dualband), now I set 2.4G control ch 1 and 20MHz channel bandwidth At the AIMESH router (dualband), now I set 5G control ch 149, 20/40/80MHz channel bandwidth At the...
  20. W

    Wireless channel for Aimesh Node

    I am using AX86U_PRO as my AIMESH router. AX11000 as my AIMESH node. They are setup to use wireless backhaul. I setup the 5GHz to have control channel 157. AIMESH router is at lvl1 of the house. AIMESH node is at lvl3 of the house. The 5GHz at lvl1 uses 157 control channel per the setup...
Back
Top