mikrotik

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. sfx2000

    MikroTik CRS309-1G-8S+IN - 8 port 10G Layer 2 - $270

    Funny nobody mentioned this... https://mikrotik.com/product/crs309_1g_8s_in The CRS309-1G-8S+ is a very compact, yet powerful networking switch. It has eight SFP+ slots, supporting up to 10 Gbit module in each, which results in a total switching capacity of 162 Gbps and total non-blocking...
  2. D

    Mikrotik DHCP Routing

    Didn’t really know what to call this.. So I am trying to achieve the following I have an ubiquiti wireless AP and a Mikrotik hapac2. I want to have two wireless networks one of which will give internet access over a vpn (route 192.168.0.3) and the other straight to wan (route 192.168.0.3). Now...
  3. P

    Unable to upgrade MikroTik WLC RouterBOARD 3011UiAS

    Folks, hi there. I have 2 RouterBOARD 3011UiAS acting as WLC's and 12 AP's hap ac RouterBOARD 962UiGS-5HacT2HnT. All are attached via ethernet cables to cisco core switches. I am able to connect to all devices either via https/http, ssh and winbox. Using instructions I found on a couple of...
  4. P

    Mobile clients unable to connect to Guest SSID on MikroTik

    Hi there, I am both new to this forum and a newbie in the MicroTik world. We just rolled out a MikroTik wireless network for a client with 2 WLC's and 12 Ap's. The devices are fairly old ones. They contain 2 SSIDS, one for local LAN access that uses Radius authentication, and the other for Guest...
  5. ashG

    Thoughts on the hEX S? Thinking of testing it against my ER-X

    After posting my "thanks for all the help!" reply in the buying advice thread (and it still stands - thanks!) I was doing some digging around and learning and found that my ER-X wasn't making use of ipv6. I ended up staying up way too late into the morning configuring the router by following...
  6. G

    VPN Router Suggestions

    Hi fellow members, To cut straight to the point, I would like to ask for suggestion on the VPN router, that so far I had narrowed it down to what is available in my country, is suitable for my requirements. Mikrotik RB110 Mirkotik RB3011 Mirkotik CCR1009 ZyXEL ZyWall 110 My setup and...
  7. R

    Routing between Ubuntu OpenVPN and MikroTik

    My goal is to be able to connect to private LAN (192.168.1.0/24) via Ubuntu VPS. For example I want this forwarding: http://{Ubuntu WAN IP}:443 --> http://{Private LAN IP}:443 Please take a look at attached screenshots. As I understand the problem is in inability to communicate between two...
  8. D

    Wireless Advice - Mikrotik

    Following deployment of a mikrotik RB1100AHx2 in my office and being very impressed, I'm now looking to replace my home system due to a dying Asus N66u. At present i have Wired Clients --> Netgear Prosafe Switch (House is full Cat 6 to this) --> (LAN) Asus N66u (Serving Wireless) (WAN) -->...
  9. U

    [Mikrotik] Advisory: Vulnerability exploiting the Winbox port

    https://forum.mikrotik.com/viewtopic.php?f=21&t=133533 Quoted in full: We have discovered a new RouterOS vulnerability affecting all RouterOS versions since v6.29. How it works: The vulnerability allowed a special tool to connect to the Winbox port, and request the system user database file...
  10. Magebarf

    Today's delightful new problem (10gbit/s connection incoming)

    Okay, this day came (or will come) a lot earlier than i thought it would. And to start this thread off, this is merely a "because I can", or rather a "because I want to", project. No necessities, only pure tech interest and general madness driving this. Today my soon to be ISP (Bahnhof...
  11. D

    Mikrotik Queues Help

    Having a little trouble with Queue setup on an RB1100AHx2. Interface 11 - this goes out to wan 0.0.0.0 --> /31 ISP link address Interface 6/7/8 - these given are public routed IP addresses (/31) given to other routers Interface 9 - this is private LAN addressed (192.168.1.0/24) which is src...
  12. thiggins

    MicroTik RB750GR3 hEX Router Reviewed

    Mikrotik's hEX is a very powerful, cheap router that may drive you crazy trying to configure it. Read on SmallNetBuilder
  13. D

    [SOLVED] Open VPN Static Route Help

    So ive been trying to get this to work all day but im banging my head against the wall. 2 Locations, 1 work, 1 home. Work: Open VPN server on Mikrotik external: xxx.xxx.xxx.153/30 --> (Tunnel 192.168.20.1 -->192.168.20.2) ---> internal: 192.168.23.240/24 --->Asus N66u 192.168.23.254/24 Home...
  14. D

    Untagged VLAN

    So ive set up a few untagged VLANs before on netgear products but im struggling to find definative answers with a mikrotik. Please excuse my lack of understanding here. I have multiple subnets on interfaces that are fire-walled at layer 3. Does this mean that they are automatically isolated...
  15. D

    Blocking ICMP on WAN

    Numerous guides regarding firewalls state to block ICMP on the WAN interface (Input). However, when i do this internet connection fails. Now my ISP uses a /31 for the point to point connection (FTTP) to us, to which i then have 1x /30 and 1x /28 route-able blocks. so my connection is: 0.0.0.0/0...
  16. D

    L2tp/IPSec Multiple profiles different clients

    Have L2tp setup, and working The IPSec I'm struggling with. So I have IPSec working: Proposal-sha1/aes256 Windows peers work with peer as sha1/aes256 iOS peers work with sha512/aes256 What I want to do is create 2 profiles 1 for Windows 1 for iOS but if I create the 2 types of peers then how...
  17. D

    Mikrotik Firewall Remote Access From DynDNS Address

    So i would like to create an access rule within the mikrotik firewall to restrict access to a couple of remote locations. Since these are residential and cannot obtain a static IP id like to know the best way of doing this, or if its even possible. The residential locations both have DynDNS...
  18. D

    /31 Mikrotik help

    Following on from this post we now have up and running our fibre connection. Currently connecting through our existing Asus RTn66u and working perfectly. So other business's are now approaching me as they want in on the connection so ive taken the plunge and bought the RB1100ahx2 routerboard...
  19. S

    Silencing and servicing a noisy CCR1036

    In this tutorial i will explain how to create a silenced CCR1036 which will allow you to enjoy multi gigabit internet speeds in your home. I am not responsible if you destroy your router using this guide. The mikrotik CCR1036 is capable of wirespeed NAT without the need for hardware acceleration...
Top