policy routing

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. O

    Mi Router AX1800 - Selective Routing / Policy Routing

    Hi, (1st post) I have a Mi Router AX1800 (MiWiFi Release 3.0.34) with a VPN (L2TP protocol) configured on it. This makes all my connected devices go through the VPN but I only need my work laptop to access the internet through the VPN. Is it possible to have a selecting routing (or policy...
  2. S

    Dropdownlist for Policy routing.

    @RMerlin Feature Request: Is it possible to make/create a client name dropdownlist in the section: VPN client for Offline Source IP's when policy routing is desired? This would be wonderful in terms of convenience and adding clients error free with different IP's by head or copy paste from a...
  3. L

    Vpn Client and Server at the same time - Risk of leakage ?

    Using Openvpn Client and Server at the same time - Is there a risk of leakage ? Hi all ! First post after years of learning on this forum :) I am currently running my RT AC68U with Merlin in openvpn server and client mode simultaneously. The client mode is for the outgoing connections from my...
  4. Skeptical.me

    ExpressVPN & Merlin 384.15

    Introduction A few days ago I updated to 384.15_beta1. Yesterday I reset my router to default factory settings. I ran into an issue when setting up an OpenVPN Client and connecting to the server where the client hung with a "connecting..." status. I want to just point to a solution for anyone...
  5. R

    OpenVPN policy routing by domain?

    As per title, I'm trying to policy route a particular domain however the interface allows only IP/Classes to be specified. Is there any work-around for this? Even policy route by destination port would alternatively help. Thanks!
  6. T

    RT-AC86U Policy Based Routing through VPN conundrum

    I have issues trying to route traffic from tcp port 51413. I have the feeling it's something simple that's staring me in the face, but can't for the life of me find what I'm missing so I was hoping for some extra eyes to help me out. The goal: Have only traffic (inbound and outbound) from port...
  7. C

    Policy Based Routing IPTV problem

    Hi folks, I have an IPTV service that allows one connection for account. If i change public IP address, the IPTV not work for about ten minutes, then working again. I would like setup the connection to IPTV by VPN, but It work only if I set destination IP to 0.0.0.0. In this case, same service...
  8. B

    (VPN) What does redirect internet traffic: All do?

    Hi, I had a quick question. I usually set up the VPN on my Asus Router using Redirect Internet Traffic: Policy Rules Strict and then select Block routed clients if tunnel goes down, but it's a long winded process having to do that each time I connect a device to the router. I want every device...
  9. D

    Need IP addresses for Netflix and others for Policy Based Routing

    How can I find the full list of the IP addresses to use for Netflix and other services (Hulu, Tidal, Pandora, etc.) when I enable policy-based routing as described in threads like this one? For example, if I ping hulu.com, I get an IP address: PING hulu.com (88.221.131.142) dig hulu.com gives...
  10. Fergal Reilly

    Router VPN with PC VPN

    Hi All, I've recently purchased an RT-AC5300 and flashed it with Merlin (Firmware shows as 384.6). I'd like to have my home network use a VPN for the increased privacy it affords. To that end, I've got a trial of NordVPN in order to figure out the settings, etc. As an additional wrinkle, I...
  11. MRizkBV

    Unable to delete, or add new entries to policy routing (OpenVPN)

    Whenever I upgrade my RT-AC56R to 384 I am never able to delete or add new records to the policy routing table in the OpenVPN clients. I have tried restoring to factory settings while on 384 and refilling the policy routing table records one by one manually and whenever I enter like 10 or 15...
  12. Keyxmakerx

    Asus Merlin Policy Routing Help (GUI)

    Hey guys, I'm trying to setup policy routing for the first time ever, so that my Linux server will run over the OpenVPN Nord VPN. The Connection is active, and the dedicated IP is active, however, my traffic isn't running over the VPN as it should be. I have the policy as anything from my...
  13. T

    Directing only DNS over VPN?

    Just wondering if this is reasonably simple to do? I'm currently running dnsmasq to point specific domains over specific DNS IP's. Everything else goes over another DNS IP address set at the WAN configuration level. Is it possible to have a VPN client up and running and point all DNS traffic...
  14. R

    OpenVPN newbie: domain-based policy routing?

    Am rapidly learning how to use the easier-than-anything-ever Merlin OpenVPN appliance options to choose which fixed-ip-address local network users do, or do not, use a given OpenVPN connection definition. And can see how to choose which "destination" public IP addresses will, or will not, be...
  15. K

    Please delete

    Can be deleted
Top