pppoe

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. Zakalwe

    Solved RT-AX86U Pro - Using as PPPoE modem with BT Full Fibter internet

    AFAIK these are the only settings I need after changing it to PPPoE connection. I'm using merlin 3004.388.8_2. The WWW/WAN light on the router is white, as well as the Wifi lights, I have the www port hooked up to the port on the newly-installed yesterday openreach box, and all the lights are...
  2. D

    GT-AX11000 / PPPoE connection error

    Hi guys, I am facing about a curious error on my AX11000 routeur. I can t established a PPPoE connection when I upgrade the firmware form 3004.388.5 to 388.6 or last version 388.7 When I downgrade from 388.7 to 3004.388.5 , internet works again like a charm. I have read every article on the...
  3. K

    Tutorial Distributel (Bell) PPPoE passthrough/bridge without SFP, using Nokia ONT

    Big news... Bell acquired Distributel... and likely due to the CRTC ruling, is allowing Distributel to use Bell fiber lines FTTH. Very good prices ($55/month for 1Gbit) on promotion for 2 years, get that black Friday discount, at least here in Ontario, Canada! Not much documentation on the...
  4. I

    RT-ACRH18 WAN port VLAN tagging?

    I have FTTH from my ISP supplied through custom ONT device and I am trying to replace the router. I bought a new 3rd party ONT device which connect to my ISP Fiber cable and allows me to connect with ethernet bridge mode (I've already connected it to my Windows machine and did the setup with...
  5. i0ntempest

    AX86U PPPoE MTU problem/questions

    Hi all, So I've been trying to optimize my WAN MTU. I'm with Bell Fibe 1.5G and using HH4000 PPPoE passthrough, using merlin 386.7_2. From what I heard Bell should support baby jumbo frames and should allow 1500 MTU. But I noticed that if I set MTU and MRU to 1500 in WAN settings, I get...
  6. C

    Asus AC68U router and HG612 modem won't connect

    Ausus AC68U Router & HG612 modem not working on BT Fibre 1 Router WAN won't connect to modem I know the broadband is working because if I use my BT Smart Hub it connects and works perfectly. I know the HG612 modem is working because if I use an external TP-Link Router it connects and works...
  7. lluke

    PPPoE Host-Uniq limited to 32 chars

    Hi All, while investigating some issues with my PPPoE connection it seems that I've to configure the Host-Uniq tag to a specific value. The value I should provide is 1ced6f301223aaaaaaaa04000000aaaaaaaa4621426f78202020aaaaaaaa which seems to be incompatible with Asus WRT Merlin (tested on...
  8. lluke

    Solved PPPoE failing with "Timeout waiting for PADO packets"

    Hi All, I've just completed the switch to a new FTTH provider here in my country (Italy). Unfortunately, after the switch I'm not able anymore to establish a PPPoE connection with my ASUS RT-AC86U due to the error "Timeout waiting for PADO packets". I've made the tries with both the latest Asus...
  9. J

    RT-AX88U pppoe dropouts

    Hello. Been using this router solid on Virgin Media for about a year. I’ve now switched to CityFibre on Vondafone Gigafast plan using my RT-AX88U. Had to manually configure the pppoe with supplied username and password, and also have to add an IPTV value to make it work, unsure why but then...
  10. L

    Only getting half speeds on ASUS AX11000

    I couldn’t figure it out for so long but I want the speeds I pay for. Idk a whole lot about the settings in this thing. I have it sitting in front of the CL modem which I use in my back room to activate ports in other parts of the house I already turned off the radio in it because I use the ASUS...
  11. lightmaster

    Solved New Fiber PPPOE service, Router "Connected" but no internet.

    My ISP upgraded us to fiber into the home service (with a new fiber modem/gateway in bridge mode). The diagnostic router they had was able to connect over PPPoE and got internet service, so they said their hardware was good and left. My Asus GT-AX11000 running Merlin WRT version 386.2_4 is...
  12. sanke1

    RT-AX88U : Tired of random PPPOe disconnects

    I am sick of PPPOe disconnects on my ASUS RT-AX88Us. FTTH ONU is in bridge mode and RT-AX88U does PPPOe dialing. While people here will be smart enough to point out... duh it's your ISP.... but I replaced this router with $20 TP-Link and that thing held the PPPOe connection for 1 month straight...
  13. S

    RT-AC68u pppoe issues

    Hi all, I've got a problem with the router, the pppoe connection fails, the router does not send the PADR back to the isp after the PADO, does anyone know what is going on? The issue started happening after a restart. Right now I am running the merlin fw, I did do a hard reset, and formatted the...
  14. K

    Unable to establish PPPoE session with ISP

    Hi Anyone got any suggestion on RT-AX58U, I am trying to replace my ISP's router with Asus RT-AX58U running merlin 384.19, using PPPoE Connection. I've entered my username and password however I worry that it doesn't get to the authentication step as changing the password for something random...
  15. shami13

    Couldn't set PPPoE service name for ASUS DSL AC51U

    Hi All, On Asus WRT couldn't set up PPPoE service name (no field for this). Knows somebody how I could setup it through ssh? Regards, Mykhailo
  16. J

    WiFi Router that supports hardware acceleration with PPPoE?

    I recently upgraded to gigabite fibre internet (which uses PPPoE) and am in the market for a router that offers full hardware acceleration with PPPoE. I'm presently on an Asus RT-AC87U with merlin firmware and like it, but the router doesn't support full hardware acceleration with PPPoE...
  17. matge

    pppoe take forever to reconnect after reboot

    Hi! I am with Bell Fibe business plan and I've put the Sagecom 2000 in bridge mode. So my Asus RT-AC68U with Merlin (latest version) connect to WAN through pppoe. I used all the default settings, entered my credentials and everything is up and running. When I apply a settings to the router...
  18. A

    PPPOE Questions

    Hi everyone, My network provider does not have an option for me to bridge my modem. I heard that setting PPPOE I sorta similar, I do somewhat understand what it does but I've always been unclear about some stuff. To begin this is how I have set up my network rn spdif -> modem (wifi off, upnp...
  19. J

    Orange FTTH vs ipv6

    Hello, I know you dont want to introduce full vlan support for good reasons. In Poland we have Orange FTTH service being probably the most popular fiber provider. I managed to get Funbox 3.0 (router with built in ONT) with separate ONT (so i can replace Funbox 3.0 with my RT-AC88U FW 384.15)...
  20. T

    Help. DSL-AC68U and AX92U - pppoe passthrough

    Hi, I am having trouble setting up pppoe passthrough (relay) on my DSL-AC68U so that my new AX92U can establish an Internet connection. Setting the connection directly on the DSL router works without any problems (Vlan ID 7). However, when I enable pppoe passthrough and connect the DSL Router...
Top