Menu
What's new
By:
Filters Better Search

solved

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. McKey

    RT-AXE7800 mcb load failed

    Hi guys! Anyone with idea what could be wrong with this router? (UART msg below) It stucks after the U-Boot SPL. Im im correct, that means it cant get the 2nd stage bootloader (u-boot) from the flash? Also, anyone ever found explanation about the startup check, and what are they means? (Like...
  2. N

    Skynet SkyNet/Firewall blocking all ping requests, including outbound

    Hi, in my RT-AX86U with latest firmware, 3004.388.8, SkyNet/firewall is blocking all ping requests, including outbound, resulting in Internet-Connectivity failure. Well, to be fair I don't think its because of SkyNet, because I can't ping anyting even when it's uninstalled (iptables virtually...
  3. Mutzli

    Diversion blocklist wont update after Skynet update

    Skynet received a whitelist update earlier this week and now Diversion won't update its blocklist. It hangs when trying to update the shared whitelist. Eventually timing out with the following error: Error: Unable to refresh Skynet to whitelist domains in shared-Diversion-whitelist. Does this...
  4. A

    Solved Great information. Thanks so much. Thank You!! have a docking station Its a dell WD15 wireless mouse or keyboard I am disabled

    I am new here as far to say ths is my second time. Drinkigbird helped me in a very informative way and I am greatly apprciated. I havea dell wd15 its a k001a anyway it is a thunderbolt c a and it poses no use for me to acheive 4 actvive search screens to help with my disability. Here not there...
  5. A

    Unbound Restarting Unbound

    Hi @Martineau, how can I restart unbound from a command prompt (ssh)? Background: When I reboot the router, unbound does not complete loading (possibly due to the way I setup the interfaces for IPv6 to work with Wireguard Manager) and so I always need to go to unbound_manager advanced to...
  6. da_qed

    Solved FW Merlin WAN 2.5gbps not an option on AX3000 [386.7_2]

    I bought some 2.5gbe nics for my pfsense box and I'm getting ready. I was reading on the ASUS site, how to set my WAN port on my RT-AX3000 to 2.5gbe. There is a drop-down menu in the web interface. [Wireless Router] How to set 2.5G port as WAN type? However there isn't an option for this in my...
  7. E

    YazFi Solved: YazFi on AC3200, unable to config

    Router: RT-AC3200 Firmware: AsusWRT-Merlin 384.13_10 YazFi Version: 4.4.2 Issue: Web UI just directs me to a 404 page and I'm unable to configure things. I'm unsure if this is due to an incompatibility or not, as the latest forum post I see and the Github page seems to be in conflict with...
  8. J

    Solved I have not been able to upgrade my RT-AC86U since 386.2 6

    Thread title pretty much covers it. I have repeatedly tried to upgrade firmware with different versions, checked the sha of each file, and made sure that I hadn't transposed numbers. I've tried upgrading with different computers, connected both wired and wirelessly. But no love. Any suggestions?
  9. I

    Solved rt-ac68u fw 386.5 one device connected with no access to internet

    hello. I have a strange behavior on my rt-ac68U with latest fw (386.5). since a couple of weeks, the two smartphones we have at home are able to connect to the WIFI, but they do not have access to internet. THe smartphones report connected to wifi without internet. I run several tests: -all the...
  10. C

    Solved VPN clients timing out and not connecting

    I just set up a VPN Server on AX88U to be usd for connecting with my home LAN when out of the house. The following client ovpn minus the ca was generated: # Config generated by Asuswrt-Merlin 386.5, requires OpenVPN 2.4.0 or newer. client dev tun proto udp remote skylight.citysky.com 6874...
  11. J

    Blocked by Fiber Folk's Box

    I have been looking forward for over a year for the new fiber line with Gb/s up and down, but am sorely disappointed. They want to furnish a zyxel modem/router even though they told me more than once I could use my equipment but they couldn't troubleshoot from their office. However, they won't...
  12. S

    Can't access OpenVPN Server router 192.168.0.1 admin from client router ASUS-Merlin

    Hi All, Trying to figure out how I can access my OpenVPN server router admin from an ASUS-Merlin client through OpenVPN. I can access internet through VPN from client out from server just fine. All my other setups work fine to access the remote router admin. My setup: Router0 (Client...
  13. J

    How to remove or ban a client?

    Is there any way to remove/ ban/ or block a client? I've got an unknown on my network reporting as intel corporate. I've blocked internet access, but that's all I can find. thanks, jts
  14. W

    Solved RT-N66 Can't change dhcp settings

    In the DHCP menu, changing the LAN>DHCP Server> DNS Server 1 entry and then "Apply" results in total loss of connection...no Ethernet or Wireless, and I must reset router. Using John's Fork, either 47EB or 46d3. I am trying to change DNS to IP of pihole and had previously done this but I do...
  15. W

    Solved RT-N66 Does not show connected devices after reboot

    RT-N66 running John's Fork 46e9: After system reboot, connected device list is empty...no ethernet or wifi although all function normallly. It eventually comes back. Oops!!! Turns out a browser cookie is holding up the show.
  16. J

    Solved Mystery Blocker

    I am getting outbound blocks to a site 196.53.113.254 (courtland.sardistel.com) that appears to be harmless, some kind of data center which is maybe 100 miles or less distant. Unless it has been spoofed or something. I have saw it for the last couple of months and almost never had any outbound...
  17. N

    RT-AC88U slow until reboot

    I just got gigabit internet via Fiber yesterday. I have anAC88U running 384.19 acting as a wired router only (wifi radios turned off) and CTF enabled. No VPN or QoS are enabled. This morning when I got up the speed was 94 Mbs, which is down from 750 Mbs last night. After rebooting the router the...
  18. A

    Scribe Scribe / syslog-ng re-load question

    scribe and uiscribe seem to be working as intended, but I am curious about 1. why the configuration is reloaded twice per hour at xx:57 and then 3 minutes later at xy:00 2. why the default config is looking for the missing file /var/lib/logrotate.status Dec 6 12:57:00 RT-AX88U-5050...
  19. ubik

    Block websites with hosts.add file in /jffs/configs (Asus RT-AC86U, AsusWRT-Merlin 384.16)

    Hi guys, First of all, sorry for the probably many times answered question but I'm having a hard time making my router load the hosts.add file with a bunch of custom hosts to block. This is what I've done so far: I've enabled "Enable JFFS custom scripts and configs" in Administration - System...
    • ubik
    • Thread
    • solved
    • Replies: 10
    • Forum: Routers
  20. Q

    [SOLVED] Is there a way to open a port via the WebUI for a server running on the router itself?

    I've installed Tor via Entware and I wish to run it as a non-exit relay. For that I need to open ports 9001 and 9030. I've been fiddling with the Port Forwarding page with no luck so far. For the "internal IP" I've tried both 192.168.1.1 and 127.0.0.1 but to no avail. The inbound packets either...
Top