wan

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. A

    RT-AX52 Wireguard Server Not Restarting After WAN Down/Outage

    Hi, Running wireguard server on RT-AX52 and noticed that when WAN connection goes down and comes back up the wireguard server does not automatically restart. If I SSH into the router after WAN is back online and run `wg show` it returns nothing. I have to reboot the router or make a change to...
  2. N

    RT-AX86U-Pro, WAN disconnect every 36 hours

    Hi all, First time posting, but been reading the forum for years now, but never had anything to contribute myself. Long story short, I've been dealing with an issue with periodic disconnects of my WAN connection for over 6 months or more. I've gone through the complete cycle of diagnosis with...
  3. StanleeSPUDwowski

    Test for reliability of router - Bench test - throughput - ping load etc

    Hello, been a while since posted anyways I have a Netgear gaming XR500 router latest updates installed however i have been seeing some degradation recently with ping load and or reliability of signal to devices , dropped packets etc maybe other issues that i am not aware of. Our ISP is spark...
  4. K

    Your isp dhcp is not functioning properly

    Hello, I have recently been fighting the issue in subject and I want to share my experience in the hope it might help some others. I have read dozens of articles in various forums, trying to work around or fix the problem. It is apparently a frequent problem with various explanations out of...
  5. A

    installing TDS 1 Gbit fiber, what equipment and prep work do I need?

    I live in southern New Hampshire, in a house built in the 1970s. Up till now I've had Internet service through the local cable TV company, Charter Spectrum (www.spectrum.com). Their co-axial cable comes off the telephone pole into my house. I've been overall pretty happy with Spectrum's...
  6. M

    WAN port is unresponsive

    Recently my RT-AX86U router failed to connect to the Internet. My setup has an ISP cable modem connected in bridge mode to the Asus router. After some possible lightning in the area, it seems that the WAN and 2.5G ports have completely stopped working. The device boots up and I'm able to connect...
  7. G

    VPN Client with Public IP, split tunnel web server over VPN and other traffic not on the VPN

    OK, please dont beat me too much... I have tried the Wiki and looked online and even here before posting... i have been trying to figure this out for a week. Here is my problem, i hope someone can help me accomplish my goal. I have a VPN client that has a Public IP and open port 80. The client...
  8. mekki

    WAN Reconnect Problems Across ASUS Routers / Firmware Versions

    Problem description: ASUS router sometimes does not attempt to reconnect WAN connection (or silently fails--nothing in log files) after outage even after modem comes back up. Steps to reproduce: Intermittent, so inconsistent. Disconnect modem and reconnect (unclear if manual modem disconnect...
  9. mekki

    Solved UPDATE: No longer required. See thread. - [Feature request] Option for DHCP Query Frequency Backoff Mode

    Current options for WAN DHCP query frequency are: Normal: When router does not get a response from ISP, send another query after 120 seconds and make 2 more attempts. Aggressive: When router does not get a response from ISP, send another query after 20 seconds and make 3 more attempts...
  10. E

    Multi source selective port forward?

    Hello. I have a need to forward several ports for a gaming PC. This works well so far on my rt-ax86u on the latest Merlin FW. I see when setting up port forwarding one can add a source IP to make the forwarding selective. Is it possible to enter more than one source IP in this field? Like say...
  11. V

    wan take new ip from isp

    Hello i have Asus rt-ac68u isp ip lease time is 15 minutes. i need new ip. i connected to my router from distance. Since I am not near the router, I cannot turn off the electricity, or if I turn off the wan connection, I cannot connect remotely again. How can I make the router wait before...
  12. J

    Why does my RT-AX88u show ports 80,443 & 21 open from WAN?

    I am sure this kind of question gets asked a lot but I have been reading many different forums/threads/sites and I just cant figure out why Nmap is showing ports 80, 443 & 21 open on my router. I have UPnP & Port Trigger disabled & I only have 1 port forwarded which is for my Plex server. So why...
  13. MarshallZA

    Question on GT-AX6000 2.5GbE Ports

    Hi SNB Peoples, I had a GT-AXE11000 until i dropped it this weekend. Like really badly. Like Paul Walker in a Porsche GT bad. I have ordered a GT-AX6000 to replace her, unlike the AXE11000 the AX6000 has Dual 2.5GbE ports. What I want to know is the following: I am going to plug my 1 Gig...
  14. M

    RT-AC66U AiCloud 2.0 not working

    I can't access my AiCloud Disk from WAN, but it works fine on LAN. I can access the Asus UI in WAN, to configure the router, so I know my router is exposed to the internet, but AiCloud 2.0 gets a timeout when I try to access it. I have OpenVPN enabled, so I can access AiCloud 2.0 from the VPN...
  15. H

    Ax88u Slow WAN speed

    I have AX88U + AX88U using AIMesh wired. Both on 388.2_2 Since the update I see slow downs from the WAN speed My ISP speedtest from the modem is 1.60Gbps down and 960Mbps up Speedtest results from AX88u Without Skynet or QOS Speedtest: 746Mbps/725Mbps With QOS only: 361Mbps/570Mbps With...
  16. I

    RT-ACRH18 WAN port VLAN tagging?

    I have FTTH from my ISP supplied through custom ONT device and I am trying to replace the router. I bought a new 3rd party ONT device which connect to my ISP Fiber cable and allows me to connect with ethernet bridge mode (I've already connected it to my Windows machine and did the setup with...
  17. J

    Help! Entered incorrect info on WAN > WAN STATIC IP and now I’m locked out

    I was foolishly attempting to “fix” a double NAT situation (new Verizon 5g gateway > DMZ to my > AC86u) … things had been working, I just wanted it to work as a single NAT annnnyway… in trying to go from a double NAT to a single NAT, I foolishly decided to change the WAN settings on my...
  18. I

    Help with connecting Isp modem, a router and stb device

    Hello I have an ISP modem on the second floor and tp link Archer c20 router and ISP stb device for iptv on the first floor. I am looking to connect the ISP modem and the router with the 1 ethernet cable going from 2nd to 1st floor and then connect the ISP stb iptv device to the router. Is it...
  19. M

    WAN failover in syslog?

    I have an RT-AC68U running Merlin 386.7_2 with a normal ISP ethernet WAN connection and a 4G USB dongle to provide a WAN failover. Failover and failback seem to be working fine, however I want to be notified when a WAN failover or failback occurs. My RT-AC68U is set to send everything from WARN...
  20. C

    Asus AC68U router and HG612 modem won't connect

    Ausus AC68U Router & HG612 modem not working on BT Fibre 1 Router WAN won't connect to modem I know the broadband is working because if I use my BT Smart Hub it connects and works perfectly. I know the HG612 modem is working because if I use an external TP-Link Router it connects and works...
Top