What's new

Asus AX11000 with Asus RT-AC88U problems

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Shiang

Occasional Visitor
Hi all, I am new to the forums. Need some advice on my setup.

Router: Asus AX11000
Mesh: Asus Rt-AC88U

My Asus AX11000 router with the latest firmware .7979. I have a unit of Asus RT-AC88U given by friend as a gift two years back which I kept in store. Recently I though of having that to be my Air Mesh Node. I was successfully connected it to the AX11000 as a node. but keep having some strange behavior such as my, I only having only 230mbps for my 5GHz 2 at the max. The AC88U just right infront of me and I am getting this speed. The 5GHz 1 was getting constant 975mbps though. Lately I am getting some strang log from Asus AX11000 shown below. Hope some guru here can help me. Thank you.

Feb 2 00:20:58 wlceventd: wlceventd_proc_event(427): eth8: Auth 8C:B8:4A:4C:FA:2B, status: 0, reason: d11 RC reserved (0)
Feb 2 00:20:58 wlceventd: wlceventd_proc_event(455): eth8: Assoc 8C:B8:4A:4C:FA:2B, status: 0, reason: d11 RC reserved (0)
Feb 2 00:21:14 wlceventd: wlceventd_proc_event(409): eth8: Disassoc 8C:B8:4A:4C:FA:2B, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Feb 2 00:21:14 wlceventd: wlceventd_proc_event(409): eth8: Disassoc 8C:B8:4A:4C:FA:2B, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Feb 2 02:26:58 acsd: eth8: staying in current channel as txop is recovered with in time limit
Feb 2 02:59:32 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) (phyId: b) Link DOWN.
Feb 2 03:23:13 acsd: eth8: staying in current channel as txop is recovered with in time limit
Feb 2 05:02:22 WATCHDOG: [FAUPGRADE][auto_firmware_check:(6148)]period_retry = 0
Feb 2 05:02:23 WATCHDOG: [FAUPGRADE][auto_firmware_check:(6177)]retrieve firmware information
Feb 2 05:02:23 WATCHDOG: [FAUPGRADE][auto_firmware_check:(6193)]no need to upgrade firmware
Feb 2 05:02:52 WATCHDOG: [FAUPGRADE][auto_firmware_check:(6148)]period_retry = 1
Feb 2 05:02:53 WATCHDOG: [FAUPGRADE][auto_firmware_check:(6177)]retrieve firmware information
Feb 2 05:02:53 WATCHDOG: [FAUPGRADE][auto_firmware_check:(6193)]no need to upgrade firmware
Feb 2 05:03:22 WATCHDOG: [FAUPGRADE][auto_firmware_check:(6148)]period_retry = 2
Feb 2 05:03:23 WATCHDOG: [FAUPGRADE][auto_firmware_check:(6177)]retrieve firmware information
Feb 2 05:03:23 WATCHDOG: [FAUPGRADE][auto_firmware_check:(6193)]no need to upgrade firmware
Feb 2 05:23:30 acsd: eth8: staying in current channel as txop is recovered with in time limit
Feb 2 05:38:33 acsd: eth8: staying in current channel as txop is recovered with in time limit
Feb 2 07:16:37 ntp: start NTP update
Feb 2 10:49:57 acsd: eth8: staying in current channel as txop is recovered with in time limit
Feb 2 15:26:52 wlceventd: wlceventd_proc_event(427): eth8: Auth 8C:B8:4A:4C:FA:2B, status: 0, reason: d11 RC reserved (0)
Feb 2 15:26:52 wlceventd: wlceventd_proc_event(455): eth8: Assoc 8C:B8:4A:4C:FA:2B, status: 0, reason: d11 RC reserved (0)
Feb 2 15:27:18 wlceventd: wlceventd_proc_event(409): eth8: Disassoc 8C:B8:4A:4C:FA:2B, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Feb 2 15:27:18 wlceventd: wlceventd_proc_event(409): eth8: Disassoc 8C:B8:4A:4C:FA:2B, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Feb 2 15:27:21 roamast: determine candidate node [40:B0:76:2C:5A:60](rssi: -42dbm) for client [8C:B8:4A:4C:FA:2B](rssi: -74dbm) to roam
Feb 2 15:51:11 wlceventd: wlceventd_proc_event(427): eth8: Auth 8C:B8:4A:4C:FA:2B, status: 0, reason: d11 RC reserved (0)
Feb 2 15:51:11 wlceventd: wlceventd_proc_event(455): eth8: Assoc 8C:B8:4A:4C:FA:2B, status: 0, reason: d11 RC reserved (0)
Feb 2 15:51:32 wlceventd: wlceventd_proc_event(409): eth8: Disassoc 8C:B8:4A:4C:FA:2B, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Feb 2 15:51:32 wlceventd: wlceventd_proc_event(409): eth8: Disassoc 8C:B8:4A:4C:FA:2B, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Feb 2 15:51:32 wlceventd: wlceventd_proc_event(427): eth7: Auth 8C:B8:4A:4C:FA:2B, status: 0, reason: d11 RC reserved (0)
Feb 2 15:51:32 wlceventd: wlceventd_proc_event(455): eth7: Assoc 8C:B8:4A:4C:FA:2B, status: 0, reason: d11 RC reserved (0)
Feb 2 16:24:06 roamast: determine candidate node [40:B0:76:2C:5A:60](rssi: -42dbm) for client [8C:B8:4A:4C:FA:2B](rssi: -73dbm) to roam
Feb 2 16:46:06 roamast: determine candidate node [40:B0:76:2C:5A:60](rssi: -38dbm) for client [8C:B8:4A:4C:FA:2B](rssi: -72dbm) to roam
Feb 2 16:46:51 roamast: determine candidate node [40:B0:76:2C:5A:60](rssi: -40dbm) for client [8C:B8:4A:4C:FA:2B](rssi: -73dbm) to roam
Feb 2 16:47:21 wlceventd: wlceventd_proc_event(409): eth7: Disassoc 8C:B8:4A:4C:FA:2B, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Feb 2 16:47:21 wlceventd: wlceventd_proc_event(409): eth7: Disassoc 8C:B8:4A:4C:FA:2B, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Feb 2 17:33:03 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) (phyId: b) Link UP at 100 mbps full duplex
Feb 2 17:33:15 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) (phyId: b) Link DOWN.
Feb 2 17:33:18 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) (phyId: b) Link UP at 1000 mbps full duplex
Feb 2 17:51:36 wlceventd: wlceventd_proc_event(427): eth8: Auth 8C:B8:4A:4C:FA:2B, status: 0, reason: d11 RC reserved (0)
Feb 2 17:51:36 wlceventd: wlceventd_proc_event(455): eth8: Assoc 8C:B8:4A:4C:FA:2B, status: 0, reason: d11 RC reserved (0)
Feb 2 17:51:47 wlceventd: wlceventd_proc_event(409): eth8: Disassoc 8C:B8:4A:4C:FA:2B, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Feb 2 17:51:47 wlceventd: wlceventd_proc_event(409): eth8: Disassoc 8C:B8:4A:4C:FA:2B, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Feb 2 18:02:06 miniupnpd[1521]: upnp_event_process_notify: connect(192.168.1.3:2869): Connection timed out
Feb 2 18:02:11 miniupnpd[1521]: upnp_event_process_notify: connect(192.168.1.3:2869): Connection timed out
Feb 2 19:16:35 ntp: start NTP update
Feb 2 19:29:19 wlceventd: wlceventd_proc_event(427): eth8: Auth 8C:B8:4A:4C:FA:2B, status: 0, reason: d11 RC reserved (0)
Feb 2 19:29:19 wlceventd: wlceventd_proc_event(455): eth8: Assoc 8C:B8:4A:4C:FA:2B, status: 0, reason: d11 RC reserved (0)
Feb 2 19:29:41 wlceventd: wlceventd_proc_event(409): eth8: Disassoc 8C:B8:4A:4C:FA:2B, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Feb 2 19:29:41 wlceventd: wlceventd_proc_event(409): eth8: Disassoc 8C:B8:4A:4C:FA:2B, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Feb 2 19:29:41 wlceventd: wlceventd_proc_event(427): eth7: Auth 8C:B8:4A:4C:FA:2B, status: 0, reason: d11 RC reserved (0)
Feb 2 19:29:41 wlceventd: wlceventd_proc_event(455): eth7: Assoc 8C:B8:4A:4C:FA:2B, status: 0, reason: d11 RC reserved (0)
Feb 2 19:51:42 roamast: determine candidate node [40:B0:76:2C:5A:60](rssi: -32dbm) for client [8C:B8:4A:4C:FA:2B](rssi: -71dbm) to roam
Feb 2 19:52:42 roamast: determine candidate node [40:B0:76:2C:5A:60](rssi: -35dbm) for client [8C:B8:4A:4C:FA:2B](rssi: -71dbm) to roam
Feb 2 19:59:02 roamast: determine candidate node [40:B0:76:2C:5A:60](rssi: -34dbm) for client [8C:B8:4A:4C:FA:2B](rssi: -71dbm) to roam
Feb 2 20:01:22 roamast: determine candidate node [40:B0:76:2C:5A:60](rssi: -33dbm) for client [8C:B8:4A:4C:FA:2B](rssi: -71dbm) to roam
Feb 2 20:08:10 kernel: SHN Release Version: 2.0.1 0679c74
Feb 2 20:08:10 kernel: UDB Core Version: 0.2.18
Feb 2 20:08:10 kernel: sizeof forward pkt param = 280
Feb 2 20:08:10 BWDPI: fun bitmap = 3
Feb 2 20:08:21 BWDPI: force to flush flowcache entries
Feb 2 20:08:21 BWDPI: rollback fc
Feb 2 20:08:21 nat: apply nat rules (/tmp/nat_rules_eth0_eth0)
Feb 2 20:08:29 kernel: SHN Release Version: 2.0.1 0679c74
Feb 2 20:08:29 kernel: UDB Core Version: 0.2.18
Feb 2 20:08:29 kernel: sizeof forward pkt param = 280
Feb 2 20:08:29 BWDPI: fun bitmap = 3
Feb 2 20:08:40 BWDPI: force to flush flowcache entries
Feb 2 20:08:41 BWDPI: rollback fc
Feb 2 20:08:41 nat: apply nat rules (/tmp/nat_rules_eth0_eth0)
Feb 2 20:09:16 kernel: SHN Release Version: 2.0.1 0679c74
Feb 2 20:09:16 kernel: UDB Core Version: 0.2.18
Feb 2 20:09:16 kernel: sizeof forward pkt param = 280
Feb 2 20:09:16 BWDPI: fun bitmap = 3
Feb 2 20:09:27 BWDPI: force to flush flowcache entries
Feb 2 20:09:27 BWDPI: rollback fc
Feb 2 20:09:27 nat: apply nat rules (/tmp/nat_rules_eth0_eth0)
Feb 2 20:43:07 roamast: determine candidate node [40:B0:76:2C:5A:60](rssi: -39dbm) for client [8C:B8:4A:4C:FA:2B](rssi: -72dbm) to roam
Feb 2 20:48:52 roamast: determine candidate node [40:B0:76:2C:5A:60](rssi: -27dbm) for client [8C:B8:4A:4C:FA:2B](rssi: -77dbm) to roam
 

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top