What's new

Release ASUS TUF-AX5400 Firmware version 3.0.0.4.388.22525

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

I forgot to turn off the reboot planner every 48h.
Looked into it after 40h Uptime and there were 203MB FREE RAM left.

Here a new screenshot after 17h uptime.
1676923550433.png


After several days very stable.
Will report back again...
 
What I noticed is that after a reboot the RAM can stay at around 78-84% for a long time. But once a transfer some files to the HDD, it raises until 94% and stays like that forever.
 
Free RAM goes up after 3 days online.
From 203 to 208MB free.
There is no memory leak on my device.

1677090063780.png
 
Interesting. Seems like it's time to make a hard reset without using a conf backup for me.
 
this version of firmware not run ok with my tb seagate usb, in the hard disk i have 11000 songs 7000 videos and 12000 photos ,with 386 firmware runs ok all with 388 the previos and the latest the cpus of the router runs higher and a certain time about 40 minutes the router shutdown and reboot. i need the latest firmware of tuf ax5400 386.. anybody can post here?
 
definitely for the ax5400 asus tuf the best firmware is the 48664 with the latest firmware if you have a lot of videos and photos on the 2tb usb drive that I have, the router restarts every half hour and none of the 386 series happens...
 
definitely for the ax5400 asus tuf the best firmware is the 48664 with the latest firmware if you have a lot of videos and photos on the 2tb usb drive that I have, the router restarts every half hour and none of the 386 series happens...
You are not wrong, 48664 was quality firmware. My only hesitation is that it's almost a year old. Hence, the reason I prefer 50224 over 48664 for 386 firmware.
 
You are not wrong, 48664 was quality firmware. My only hesitation is that it's almost a year old. Hence, the reason I prefer 50224 over 48664 for 386 firmware.
now runs ok 388 latest... for you what is best 386 latest or 388 latest?
 
what about TUF-AX5400_388.1_0-gnuton1_tuf_puresqubi.w ? its the merlin version fo ax5400... whats your opinion?
 
now runs ok 388 latest... for you what is best 386 latest or 388 latest?
Latest 388 I have only tested for a week, so too early to judge. Thus far, seems stable. I had a brief (less than 30 seconds) internet disconnection (not WiFi), but I think (hope!) it was ISP related.
 
when connect my seagate firecuda 2tb case in router runs ok but in the log of router ---- uas is blacklisted for this device using usb-storage instead its normal? or its a problem...
 
i never made a clean update i have jpg for all of my 53 clients wifi . if i made a clean update all cleared... no no no... its not necesary a clean update when asus update the firmware without this...
 

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top