BUG in Smart Connect Rule page - 386.8 GT-AXE16000

[curreli]

Hello,

I have enabled Smart Connect but only for the two 5Ghz bands.

When opening the Smart Connect Rule page, the last section named "Interface Select and Quality Procedures" is empty and I immediately get a JS error in the console (without doing any action):

When trying to change some parameters and apply them, I get the following JS error upon clicking on "Apply" button:

The only action I can do is "Default".

Thank you in advance for checking this issue.

 

[L&LD]

Welcome to the forums @curreli.

Try using a different browser. Or, the one you're using but in 'safe' mode.

Do you have any extensions enabled? They may be interfering with the GUI.

 

[curreli]

Hello,

Thank you for your reply.

What I reported before happened in Chrome v104.0.5112.101 (x86_64). I tried Incognito mode with no extensions, same issue.

Same error occurs in Edge (Chrome-based).


Firefox v104.0.1 (64-bit)

No extensions.

Page load:

Uncaught TypeError: _array[k] is undefined
    genIfSelectBand http://192.168.1.1/Advanced_Smart_Connect.asp:452
    initial http://192.168.1.1/Advanced_Smart_Connect.asp:126
    onload http://192.168.1.1/Advanced_Smart_Connect.asp:1
Advanced_Smart_Connect.asp:452:4

Apply button:

Uncaught TypeError: document.querySelector(...) is null
    applyRule http://192.168.1.1/Advanced_Smart_Connect.asp:677
    onclick http://192.168.1.1/Advanced_Smart_Connect.asp:1
Advanced_Smart_Connect.asp:677:37

Safari Version 15.6 (17613.3.9.1.5)

No extensions.

Page load:

[Error] TypeError: undefined is not an object (evaluating '_array[k][0]')
    genIfSelectBand (Advanced_Smart_Connect.asp:452)
    initial (Advanced_Smart_Connect.asp:126)
    onload (Advanced_Smart_Connect.asp:764)

Apply button:

[Error] TypeError: null is not an object (evaluating 'document.querySelector('#wl'+ i +'_bsd_if_qualify_policy_t').value')
    applyRule (Advanced_Smart_Connect.asp:677:89)
    onclick (Advanced_Smart_Connect.asp:837)

I cannot make it work on any browser I tried.

Thanks!

 

[blackfireball5]

I have had this same issue since I got my AXE-16000. It happens for me in both the latest stock firmware and also Merlin latest 386.8.

I am unable to make changes to the rules for Smart Connect due to this.

EDIT:

Because I can't control it, I've reverted to using 4 dedicated SSID's, but would prefer to use Smart Connect.

EDIT 2:

Apparently this has happened before with the AC88U:

Smart Connect Rules 'Apply' Button Not Working

Hi, Recently purchased a RT-AC88U, and for the most part very impressed with it and the extensions the AsusWRT Merlin F/W brings. I've solved various setup niggles but am left with 1 outstanding which has led to me finding what I think is a bug (or 2)... The root issue is 2.4Ghz speeds are...

www.snbforums.com

And was fixed September 2, 2016:

webui: Apply button didn't work on Smart Connect page for the RT-AC88… · RMerl/asuswrt-merlin@15f0031

…U (backport from upstream)

github.com

 

[blackfireball5]

Is anyone else experiencing this?