gabox
Occasional Visitor
Hi, I am newbie on world Asus router. I have a rt68u so im very satisfied with it. My doubt is following about routing table. I used my Asus router behind a isp modem bridge. I am a little confusing about 192.168.1.1 i dont know about it ?? and i dont understand on terminology routing table. Thanks a lot for your time.
Lan=192.168.2.0
Wan=179.41.x.x
GUI:
Destination Gateway Genmask Flags Metric Ref Use Type Iface
179.41.x.x * 255.255.255.255 UH 0 0 0 WAN0 ppp0
192.168.2.0 * 255.255.255.0 U 0 0 0 LAN br0
192.168.1.0 * 255.255.255.0 U 0 0 0 MAN0 eth0
default 179.41.x.x 0.0.0.0 UG 0 0 0 WAN0 ppp0
default 192.168.1.1 0.0.0.0 UG 1 0 0 MAN0 eth0
Console output:
gabox@(none):/tmp/home/root# ip route
179.41.x.x dev ppp0 proto kernel scope link
192.168.2.0/24 dev br0 proto kernel scope link src 192.168.2.1
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.33
127.0.0.0/8 dev lo scope link
default via 179.41.x.x dev ppp0
default via 192.168.1.1 dev eth0 metric 1
Lan=192.168.2.0
Wan=179.41.x.x
GUI:
Destination Gateway Genmask Flags Metric Ref Use Type Iface
179.41.x.x * 255.255.255.255 UH 0 0 0 WAN0 ppp0
192.168.2.0 * 255.255.255.0 U 0 0 0 LAN br0
192.168.1.0 * 255.255.255.0 U 0 0 0 MAN0 eth0
default 179.41.x.x 0.0.0.0 UG 0 0 0 WAN0 ppp0
default 192.168.1.1 0.0.0.0 UG 1 0 0 MAN0 eth0
Console output:
gabox@(none):/tmp/home/root# ip route
179.41.x.x dev ppp0 proto kernel scope link
192.168.2.0/24 dev br0 proto kernel scope link src 192.168.2.1
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.33
127.0.0.0/8 dev lo scope link
default via 179.41.x.x dev ppp0
default via 192.168.1.1 dev eth0 metric 1