What's new

Dump of Quantenna's NVRAM on RT-AC87U

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Oleksiy Lukyanchykov

Occasional Visitor
Hi all,

I'm trying to reflash accidentally erased NVRAM of Quantenna SoC by an universal programmer. I guess that I have to concatenate dumps from all /dev/mtd* partitions on Quantenna SoC into the single file and write that file into the NVRAM chip. Can anyone share dumps for all mtd partitions of Quantenna SoC?

Thank you in advance!
 
There's no NVRAM inside QTN.

Exactly what you have done in detail?

If you erased the CFE / Bootloader you can always recover it with your programmer, JTAG will not work on that model, no software support at this moment.
 
Last edited:
As long as you didn't zero out the boot-loader - a reflash/reset of the factory firmware should put you back in business...
 
mtd1 = uboot_env, better forget it...

Flash the TSOP again or just RMA it (easy way).
 
Last edited:
Yes, you need the QTN data from RT-AC87U, why not RMA? Out of warranty already?
 
I've bought RT-AC87U in US, but I'm in Ukraine now. Asus doesn't provide worldwide guarantee. So it's more easily and funny to recover the router by myself. And yes, it's out of warranty already.
 
Good luck. :)
 
Indeed, but think it could be worse, at least you have the router working and with 2.4GHZ.
 
@hggomes - Exactly in your source code - what have you done in detail - I still have a pending GPL pull request...

sfx2000, this is getting really old.

I get the need for gpl compliancy, but this is just public harassment at this point. Please PM hggomes directly instead.
 
Guys, it's not so complex to dump /dev/mtd* partitions of Quantenna. Quantenna also runs Linux, so you just need to execute "dump" command few times and copy results. Type "telnet 1.1.1.2" in RT-AC87 command line to log into Quantenna.
Thanks for your help in advance!
 
Type "telnet 1.1.1.2" in RT-AC87 command line to log into Quantenna.
Thanks for your help in advance!

Doesn't seem to work on mine.

admin@RT-AC87U:/tmp/home/root# telnet 1.1.1.2
telnet: can't connect to remote host (1.1.1.2): Connection timed out
admin@RT-AC87U:/tmp/home/root#
 
Same here..

admin@RT-AC87U:/tmp/home/root# telnet 1.1.1.2
telnet: can't connect to remote host (1.1.1.2): Connection timed out
admin@RT-AC87U:/tmp/home/root#
 
Similar threads
Thread starter Title Forum Replies Date
M ORIGINAL DSL-AC68U CFE DUMP??? ASUS AC Routers & Adapters (Wi-Fi 5) 1

Similar threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top