FlexQoS FlexQoS 1.0 - Flexible QoS Enhancement Script for Adaptive QoS

[dave14305]

Hi,
is this the default setup right after a fresh install of FlexQoS?
thanks
View attachment 24615

Yes, all the old hardcoded rules from FreshJR are now editable or can be deleted.

I’m not sure I really see the need to pick on Snapchat by default, so maybe it will disappear from default setup in a later version.

 

[ugandy]

Yes, all the old hardcoded rules from FreshJR are now editable or can be deleted.

I’m not sure I really see the need to pick on Snapchat by default, so maybe it will disappear from default setup in a later version.

Thanks!
is there a link/doc with recommended common changes to the default setup?

 

[dave14305]

Thanks!
is there a link/doc with recommended common changes to the default setup?

LOL, you mean a default list of changes that people make to the defaults?

Depends on what's important to you.

 

[ugandy]

LOL, you mean a default list of changes that people make to the defaults?

Depends on what's important to you.

feel silly now...

 

[dave14305]

feel silly now...

I know what you meant. I just didn't have a good answer.

So do you call yourself "U.G. Andy" or "U-gandy"? I always hear "U-gandy" in my head when I see your posts.

 

[ugandy]

I know what you meant. I just didn't have a good answer.

So do you call yourself "U.G. Andy" or "U-gandy"? I always hear "U-gandy" in my head when I see your posts.

it's just a nickname from childhood; as a kid i was quite skinny, so my friends did hugo+ghandi = ugandy. so "u-gandy" it was (this was in back in Portugal, where hugo, is pronounced ugo, so the 'u' sound is different).
TMI

 

[dave14305]

Version 0.9.2

• NEW: Override tc quantum when over 200000 or under the WAN MTU size (this should minimize any warning messages in syslog)
• NEW: Added ability to switch between stable and development channels (webui and script will show if not on stable channel)
• NEW: Added SNBForums.com SPOILER and CODE tags to debug output for cleaner copy/paste when posting
• CHANGED: When A.QoS is disabled, the FlexQoS button will direct you to the QoS page when clicked (thanks @thelonelycoder)
• CHANGED: Custom URL enhancements (contributed by @maghuro)
• CHANGED: Added enter prompts after interactive menu choices
• CHANGED: Removed VPN Fix that has been in Merlin since 384.8
• FIXED: Fix issues with AppDB names missing after a reboot
• FIXED: Hide extra "Reset" next to iptables rule add button
• FIXED: missing restore prompt on re-install
• FIXED: Fix issues where the WebUI page might change unintentionally when the script runs

sh /jffs/addons/flexqos/flexqos.sh update

The quantum change is in need of much testing, especially those of you with small bandwidth. I've currently set a floor of MTU+14 for minimum quantum, but I don't know with any certainty how this would work at low bandwidth.

 

[raion969]

is there a way to save the hardcoded rules in the script by updating ?

 

[jodpel]

Version 0.9.3

• The quantum change is in need of much testing, especially those of you with small bandwidth. I've currently set a floor of MTU+14 for minimum quantum, but I don't know with any certainty how this would work at low bandwidth.

I have 15 down and 1.5 up. I don't know what you consider small bandwidth. How would I test and report results? While I have 25 years of IT experience, I barely have a grasp of what I'm doing with regard to IP Tables, QOS, etc.

edit: We have switched to streaming "television" services and several of them show up as web traffic. I have no understanding of how to add rules to change that. I'd be glad to test though.

 

[QuikSilver]

Version 0.9.3

• NEW: Override tc quantum when over 200000 or under the WAN MTU size (this should minimize any warning messages in syslog)
• NEW: Added ability to switch between stable and development channels (webui and script will show if not on stable channel)
• NEW: Added SNBForums.com SPOILER and CODE tags to debug output for cleaner copy/paste when posting
• CHANGED: When A.QoS is disabled, the FlexQoS button will direct you to the QoS page when clicked (thanks @thelonelycoder)
• CHANGED: Custom URL enhancements (contributed by @maghuro)
• CHANGED: Added enter prompts after interactive menu choices
• CHANGED: Removed VPN Fix that has been in Merlin since 384.8
• FIXED: Fix issues with AppDB names missing after a reboot
• FIXED: Hide extra "Reset" next to iptables rule add button
• FIXED: missing restore prompt on re-install
• FIXED: Fix issues where the WebUI page might change unintentionally when the script runs

sh /jffs/addons/flexqos/flexqos.sh update

The quantum change is in need of much testing, especially those of you with small bandwidth. I've currently set a floor of MTU+14 for minimum quantum, but I don't know with any certainty how this would work at low bandwidth.

Only showing 9.2 version here....

FlexQoS v0.9.2 released 07/09/2020

Advanced configuration available via:
  http://192.168.1.1/user1.asp

Would you like to restart QoS for modifications to take effect? [1=Yes 2=No]: 1
Restarting QoS and Firewall...

Done.

QuikSilver156@RT-AC86U-AEA8:/tmp/home/root# sh /jffs/addons/flexqos/flexqos.sh u
pdate

FlexQoS v0.9.2 released 07/09/2020

Checking for updates

 You have the latest version installed
 Would you like to overwrite your existing installation anyway? [1=Yes 2=No] :

 

[immi803]

@dave14305
What the link for trying development branch? Is 0.9.3 in develop branch as Master showing 0.9.2 latest?

Second, is it OK to overwrite dev branch on master?

 

[Jack Yaz]

guys 0.9.3 is probably just a typo...

 

[dave14305]

guys 0.9.3 is probably just a typo...

Yes, post 1 was correct. Updated post 487.

 

[dave14305]

I have 15 down and 1.5 up. I don't know what you consider small bandwidth. How would I test and report results? While I have 25 years of IT experience, I barely have a grasp of what I'm doing with regard to IP Tables, QOS, etc.

edit: We have switched to streaming "television" services and several of them show up as web traffic. I have no understanding of how to add rules to change that. I'd be glad to test though.

Run flexqos debug where you will see new lines for Quantum. I’d like to know if any are not “default”.

I was hesitant to change the minimum quantum, so I’m not sure what to have you look for, but knowing if you see any odd behavior or slowdowns will be useful. This minimum may not stay in the final release, but it’s worth trying during beta.

 

[sentinelvdx]

Hi, is it possible to set multiple marks into one same rule?
I have multiple marks which I know belongs to file transfer and not websurfing.

Using S.G.S9+ Duos w/ Tapatalk

 

[dave14305]

@dave14305
What the link for trying development branch? Is 0.9.3 in develop branch as Master showing 0.9.2 latest?

Second, is it OK to overwrite dev branch on master?

Today develop and master are equal, so no benefits. But the syntax is:

flexqos develop
Or
flexqos stable

Switching in either direction will force an update to that channel (GitHub branch).

 

[dave14305]

Hi, is it possible to set multiple marks into one same rule?
I have multiple marks which I know belongs to file transfer and not websurfing.

No, you should just use multiple AppDB or iptables rules. Are you talking about an AppDB rule, or an iptables rule?

 

[dave14305]

is there a way to save the hardcoded rules in the script by updating ?

Please give an example. Do you mean hardcoded rules in the FreshJR script?

 

[sentinelvdx]

No, you should just use multiple AppDB or iptables rules. Are you talking about an AppDB rule, or an iptables rule?

Whats the difference? I always used iptables for rules because on freshjr's qos appdb was not working so I never investigated whats for appdb.
But on FreshJr's he had just 3 iptable rules to set and I'm switching to your fork [emoji846]

Using S.G.S9+ Duos w/ Tapatalk

 

[dave14305]

Whats the difference? I always used iptables for rules because on freshjr's qos appdb was not working so I never investigated whats for appdb.
But on FreshJr's he had just 3 iptable rules to set and I'm switching to your fork [emoji846]

Using S.G.S9+ Duos w/ Tapatalk

If you always want all instances of a Mark to go to a different Class (and its priority), use an AppDB rule. If it’s only for certain connections, use an iptables rule to filter on IP or port as well.